[PATCH 0614/1285] Replace numeric parameter like 0444 with macro

[Baole Ni]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
Signed-off-by: Baole Ni <baolex.ni@xxxxxxxxx>
---
 drivers/media/usb/dvb-usb/technisat-usb2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c
index d9f3262..f53a861 100644
--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -40,7 +40,7 @@
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int debug;
-module_param(debug, int, 0644);
+module_param(debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(debug,
 		"set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \
 		DVB_USB_DEBUG_STATUS);
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(debug,
 /* disables all LED control command and
  * also does not start the signal polling thread */
 static int disable_led_control;
-module_param(disable_led_control, int, 0444);
+module_param(disable_led_control, int, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(disable_led_control,
 		"disable LED control of the device "
 		"(default: 0 - LED control is active).");
-- 
2.9.2