[PATCH 0537/1285] Replace numeric parameter like 0444 with macro

[Baole Ni]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
Signed-off-by: Baole Ni <baolex.ni@xxxxxxxxx>
---
 drivers/media/radio/radio-gemtek.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index cff1eb1..90475b3 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -63,20 +63,20 @@ static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
 			      [1 ... (GEMTEK_MAX - 1)] = -1 };
 static int radio_nr[GEMTEK_MAX]	= { [0 ... (GEMTEK_MAX - 1)] = -1 };
 
-module_param(probe, bool, 0444);
+module_param(probe, bool, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(probe, "Enable automatic device probing.");
 
-module_param(hardmute, bool, 0644);
+module_param(hardmute, bool, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may "
 	 "reduce static noise.");
 
-module_param_array(io, int, NULL, 0444);
+module_param_array(io, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic "
 	 "probing is disabled or fails. The most common I/O ports are: 0x20c "
 	 "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
 	 "work for the combined sound/radiocard).");
 
-module_param_array(radio_nr, int, NULL, 0444);
+module_param_array(radio_nr, int, NULL, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
 
 /*
-- 
2.9.2