There is an error "e1000e: probe of 0000:00:19.0 failed with error -3"
that can be observed after power-on on some I218 controllers.
Hardware reset and re-initialization fixes the issue.
Signed-off-by: Denis Turischev <denis.turischev@xxxxxxxxxxxxxx>
diff -Nru linux-4.7.orig/drivers/net/ethernet/intel/e1000e/ich8lan.c linux-4.7/drivers/net/ethernet/intel/e1000e/ich8lan.c
--- linux-4.7.orig/drivers/net/ethernet/intel/e1000e/ich8lan.c 2016-07-24 22:23:50.000000000 +0300
+++ linux-4.7/drivers/net/ethernet/intel/e1000e/ich8lan.c 2016-08-01 13:59:08.046563095 +0300
@@ -155,6 +155,7 @@
static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);
+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -459,8 +460,12 @@
phy->id = e1000_phy_unknown;
ret_val = e1000_init_phy_workarounds_pchlan(hw);
- if (ret_val)
- return ret_val;
+ if (ret_val) {
+ e1000_reset_hw_ich8lan(hw);
+ ret_val = e1000_init_phy_workarounds_pchlan(hw);
+ if (ret_val)
+ return ret_val;
+ }
if (phy->id == e1000_phy_unknown)
switch (hw->mac.type) {
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@xxxxxxxxxxxxxxxx
http://lists.osuosl.org/mailman/listinfo/intel-wired-lan