Re: [Letux-kernel] [PATCH v2] musb: omap2430: do not assume balanced enable()/disable()

[Andreas Kemnade]

Hi,

On Thu, 4 Aug 2016 07:29:19 -0700
Tony Lindgren <tony@xxxxxxxxxxx> wrote:

> Hi,
> 
> * H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [160803 10:07]:
> > All this prevents detection of cable plugin-events and VBUS
> > measurement and setting OTG_EN before charging is attempted.
> 
> So I gave this patch a try but it now blocks all deeper SoC idle
> states as the PHY stays active. I think the real fix is to make
> sure the charger behaves independent of the USB PHY state. So
> probably this needs to be fixed in phy-twl4030-usb.c and
> twl4030_charger.c instead. Now it sounds like we're also shutting
> down the charger with the USB PHY.
> 
Then there is another power management issue. The patch is not about
fixing every pm issue in musb. That is not only about charging, it is
about enabling/disabling() the phy unbalanced:
Again what happens here without the patch:

musb will be initialized:
omap2430_musb_disable()
   calls phy_power_off(), phy will be disabled,
	phy->power_count goes to -1.

gadget driver is loaded.
musb_start() is called
    omap2430_musb_enable() is called
	calls phy_power_on(),
	phy->power_count goes to 0,
	phy is not powered on because power_count != 1
-> no gadget working, no charging.

Regards
Andreas