[GIT PULL] pwm: Changes for v4.8-rc1

From: Thierry Reding
Date: Fri Aug 05 2016 - 11:51:53 EST

Next message: Sebastian Andrzej Siewior: "Re: [PATCH] x86/mm: disable preemption during CR3 read+write"
Previous message: Paolo Bonzini: "[GIT PULL] Final batch of KVM changes for 4.8 merge window"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Linus,

The following changes since commit 33cdcee04be3b4482be97393167e7561b2584e1e:

pwm: Fix pwm_apply_args() (2016-06-23 18:37:05 +0200)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git tags/pwm/for-4.8-rc1

for you to fetch changes up to 53de7c26ded7f5e954bfc202dffc43c0dd165337:

Merge branch 'for-4.8/regulator' into for-next (2016-07-25 16:23:40 +0200)

You'll notice that I've started using several branches to maintain the
PWM subsystem. In order to make fixes available to linux-next early on
I pull in the fixes branch into the for-next branch. The base for this
pull request is that fixes branch (you had already pulled that for 4.7
earlier) so that you don't see the same patches twice. One side-effect
of that is that you'll still see the merge for that branch in the
shortlog below. I haven't found a way to get rid of that, except maybe
by changing my workflow and ask Stephen to separately pull in my fixes
branch into linux-next, so that I don't have to include it in for-next
anymore.

Another alternative would be to redo the merge right before I send out
the pull request and exclude the fixes branch. That, of course, means
what you get is slightly different from what linux-next contains, and
I'd like to avoid that.

I suspect that you don't mind much either way, but in case you do, let
me know what your preference is and I can adapt for the next release
cycle.

Thanks,
Thierry

----------------------------------------------------------------
pwm: Changes for v4.8-rc1

This set of changes improve some aspects of the atomic API as well as
make use of this new API in the regulator framework to allow properly
dealing with critical regulators controlled by a PWM.

Aside from that there's a bunch of updates and cleanups for existing
drivers, as well as the addition of new drivers for the Broadcom iProc,
STMPE and ChromeOS EC controllers.

----------------------------------------------------------------
Alexandre Courbot (1):
regulator: pwm: Support for enable GPIO

Andy Shevchenko (2):
pwm: lpss: pci: Enable PWM module on Intel Edison
pwm: lpss: Move clk_rate check to ->probe()

Boris Brezillon (13):
regulator: pwm: Drop unneeded pwm_enable() call
pwm: Add a helper to prepare a new PWM state
pwm: Add relative duty cycle manipulation helpers
regulator: pwm: Adjust PWM config at probe time
regulator: pwm: Switch to the atomic PWM API
regulator: pwm: Properly initialize the ->state field
regulator: pwm: Retrieve correct voltage
pwm: rockchip: Fix period and duty cycle approximation
pwm: rockchip: Add support for hardware readout
pwm: rockchip: Avoid glitches on already running PWMs
pwm: rockchip: Add support for atomic update
regulator: pwm: Support extra continuous mode cases
regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range

Brian Norris (3):
mfd: cros_ec: Add EC_PWM function definitions
dt-bindings: pwm: Add binding for ChromeOS EC PWM
pwm: Add ChromeOS EC PWM driver

Cooper Jr., Franklin (3):
pwm: pwm-tiehrpwm: Update DT binding document to use generic node name
pwm: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
pwm: pwm-ti*: Remove support for local clock gating

Dan O'Donovan (1):
pwm: lpss: Fix base_unit calculation for PWM frequency

Douglas Anderson (1):
regulator: pwm: Fix regulator ramp delay for continuous mode

Guillermo Rodriguez (1):
pwm: atmel: Fix disabling of PWM channels

Hyong Bin Kim (1):
pwm: tegra: Avoid overflow when calculating duty cycle

Laxman Dewangan (2):
dt-bindings: pwm: tegra: Add compatible string for Tegra186
pwm: tegra: Add support for Tegra186

Lee Jones (2):
pwm: Add PWM capture support
pwm: sysfs: Add PWM capture support

Linus Walleij (2):
dt-bindings: pwm: Add DT bindings for STMPE PWM
pwm: Add a driver for the STMPE PWM

Mika Westerberg (1):
pwm: lpss: Prevent on_time_div overflow on lower frequencies

Rohith Seelaboyina (1):
pwm: tegra: Add support for reset control

Ryo Kodama (1):
pwm: rcar: Use ARCH_RENESAS

Sylvain Lemieux (1):
pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value

Thierry Reding (15):
Merge branch 'for-4.8/core' into for-4.8/regulator
pwm: Remove gratuitous blank line
Merge tag 'pwm-modernization' of git://git.kernel.org/.../broonie/regulator into for-4.8/regulator
pwm: tegra: Drop NUM_PWM macro
pwm: tegra: Remove useless padding
pwm: tegra: Rename mmio_base to regs
pwm: atmel: Fix checkpatch warnings
pwm: atmel: Use of_device_get_match_data()
Merge branch 'for-4.8/mfd' into for-4.8/drivers
Merge branch 'fixes' into for-next
Merge branch 'for-4.8/core' into for-next
Merge branch 'for-4.8/mfd' into for-next
Merge branch 'for-4.8/capture' into for-next
Merge branch 'for-4.8/drivers' into for-next
Merge branch 'for-4.8/regulator' into for-next

Tomeu Vizoso (1):
mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper

Ulrich Hecht (1):
dt-bindings: pwm: Add R-Car H3 device tree bindings

Victor(Weiguo) Pan (1):
pwm: tegra: Allow 100 % duty cycle

Yendapally Reddy Dhananjaya Reddy (2):
dt-bindings: pwm: Add Broadcom iProc PWM controller binding
pwm: Add support for Broadcom iProc PWM controller

Documentation/ABI/testing/sysfs-class-pwm | 9 +
.../devicetree/bindings/pwm/brcm,iproc-pwm.txt | 21 ++
.../devicetree/bindings/pwm/google,cros-ec-pwm.txt | 23 ++
.../devicetree/bindings/pwm/nvidia,tegra20-pwm.txt | 12 +-
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 +-
.../devicetree/bindings/pwm/renesas,pwm-rcar.txt | 1 +
.../devicetree/bindings/pwm/st,stmpe-pwm.txt | 18 ++
.../bindings/regulator/pwm-regulator.txt | 26 +-
drivers/platform/chrome/cros_ec_proto.c | 17 ++
drivers/pwm/Kconfig | 26 +-
drivers/pwm/Makefile | 3 +
drivers/pwm/core.c | 27 ++
drivers/pwm/pwm-atmel.c | 30 +-
drivers/pwm/pwm-bcm-iproc.c | 277 ++++++++++++++++++
drivers/pwm/pwm-cros-ec.c | 260 +++++++++++++++++
drivers/pwm/pwm-lpc32xx.c | 7 +
drivers/pwm/pwm-lpss-pci.c | 1 +
drivers/pwm/pwm-lpss.c | 26 +-
drivers/pwm/pwm-rockchip.c | 178 +++++++++---
drivers/pwm/pwm-stmpe.c | 319 +++++++++++++++++++++
drivers/pwm/pwm-tegra.c | 69 +++--
drivers/pwm/pwm-tiecap.c | 37 +--
drivers/pwm/pwm-tiehrpwm.c | 38 +--
drivers/pwm/pwm-tipwmss.c | 49 ----
drivers/pwm/pwm-tipwmss.h | 39 ---
drivers/pwm/sysfs.c | 17 ++
drivers/regulator/pwm-regulator.c | 196 +++++++++----
include/linux/mfd/cros_ec.h | 15 +
include/linux/mfd/cros_ec_commands.h | 31 ++
include/linux/pwm.h | 113 +++++++-
30 files changed, 1599 insertions(+), 290 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.txt
create mode 100644 Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.txt
create mode 100644 Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt
create mode 100644 drivers/pwm/pwm-bcm-iproc.c
create mode 100644 drivers/pwm/pwm-cros-ec.c
create mode 100644 drivers/pwm/pwm-stmpe.c
delete mode 100644 drivers/pwm/pwm-tipwmss.h

Next message: Sebastian Andrzej Siewior: "Re: [PATCH] x86/mm: disable preemption during CR3 read+write"
Previous message: Paolo Bonzini: "[GIT PULL] Final batch of KVM changes for 4.8 merge window"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]