Re: [PATCH v2 00/17] ARM: mvebu: misc Armada 38x/39x DT and v7 defconfig improvements

[Gregory CLEMENT]

Hi Grzegorz,
 
 On Thu, Aug 04 2016, Grzegorz Jaszczyk <jaz@xxxxxxxxxxxx> wrote:

> Hello,
>
> This is the second version of patch-set which enables some commonly used
> features in mvebu_v7_defconfig and updates old or introduces new dts/dtsi
> related to Armada 38x and Armada 39x SoC family. All comments from
> v1 are included, more details in a changelog below.
>
> Any comments or remarks would be welcome.

All the patches are applied on the mvbeu branches:
The first 2 on mvebu/defconfig and all the other on mvebu/dt

Thanks,

Gregory


>
> Best regards,
> Grzegorz
>
> Changelog:
> v1 -> v2
>
> - Add at least one line of commit log entry for those patches, which
> contained only commit title.
>
> Suggested by Andrew Lunn and Gregory Clement.
>
> - Drop patch "ARM: mvebu: enable E1000E in mvebu_v7_defconfig", since it
> enables PCIe card which is not a part of the SoC.
>
> Suggested by Russell King and Thomas Petazzoni.
>
> - Change dts prefixes in commit title from "ARM: mvebu: <board_name>" to
> "ARM: dts: mvebu: <board_name>"
>
> Suggested by Gregory Clement.
>
> - Add nodes describing the eeproms connected to I2C buses in
> armada-390-db.dts and armada-395-gp.dts. Also add information about
> connectors used and described in mentioned dts's.
>
> Suggested by Gregory Clement.
>
> - Improve devicetree bindings about required property for Marvell Armada 39x
> family: Armada 398 based boards should have only "marvell,armada398" and not
> "marvell,armada395".
>
> Suggested by Rob Herring.
>
> Grzegorz Jaszczyk (17):
>   ARM: mvebu: enable MTD command line partition table in
>     mvebu_v7_defconfig
>   ARM: mvebu: enable UBI and UBIFS in mvebu_v7_defconfig
>   ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
>   ARM: dts: mvebu: a385-db-ap: add default partition description for
>     NAND
>   ARM: dts: mvebu: armada-390: add missing compatibility string and
>     bracket
>   ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
>   ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and
>     Coherency fabric
>   ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x
>     SoCs
>   ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
>   ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
>   ARM: dts: mvebu: armada-39x: add missing nodes describing USB2.0 and
>     USB3.0
>   ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
>   ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
>   ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
>   ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
>   ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB
>     board
>   ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP
>     Board
>
>  .../devicetree/bindings/arm/marvell/armada-39x.txt |  15 +-
>  arch/arm/boot/dts/armada-385-db-ap.dts             |  30 +++-
>  arch/arm/boot/dts/armada-390-db.dts                | 175 +++++++++++++++++++++
>  arch/arm/boot/dts/armada-390.dtsi                  |   3 +
>  arch/arm/boot/dts/armada-395-gp.dts                | 163 +++++++++++++++++++
>  arch/arm/boot/dts/armada-395.dtsi                  |  76 +++++++++
>  arch/arm/boot/dts/armada-398-db.dts                |   8 +
>  arch/arm/boot/dts/armada-398.dtsi                  |  10 +-
>  arch/arm/boot/dts/armada-39x.dtsi                  |  94 ++++++++++-
>  arch/arm/configs/mvebu_v7_defconfig                |   3 +
>  10 files changed, 570 insertions(+), 7 deletions(-)
>  create mode 100644 arch/arm/boot/dts/armada-390-db.dts
>  create mode 100644 arch/arm/boot/dts/armada-395-gp.dts
>  create mode 100644 arch/arm/boot/dts/armada-395.dtsi
>
> -- 
> 1.8.3.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com