[PATCH v4 1/2] mfd: ti-smusbdig: Add support for the TI SM-USB-DIG

From: Andrew F. Davis
Date: Tue Aug 09 2016 - 10:55:59 EST


The TI SM-USB-DIG is a USB to SPI/I2C/1Wire/GPIO adapter.
Add MFD core support.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
drivers/mfd/Kconfig | 9 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/ti-smusbdig.c | 138 ++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/ti-smusbdig.h | 75 ++++++++++++++++++++++
4 files changed, 224 insertions(+)
create mode 100644 drivers/mfd/ti-smusbdig.c
create mode 100644 include/linux/mfd/ti-smusbdig.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2d1fb64..0b63431 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1387,6 +1387,15 @@ config MFD_LM3533
additional drivers must be enabled in order to use the LED,
backlight or ambient-light-sensor functionality of the device.

+config MFD_TI_SMUSBDIG
+ tristate "Texas Instruments SM-USB-DIG interface adapter"
+ depends on USB
+ select MFD_CORE
+ help
+ Support for the TI SM-USB-DIG USB to SPI/I2C/1Wire/GPIO adapter.
+ Additional drivers such as SPI_TI_SMUSBDIG, I2C_TI_SMUSBDIG, etc. must
+ be enabled in order to use the functionality of the device.
+
config MFD_TIMBERDALE
tristate "Timberdale FPGA"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2ba3ba3..aa2845e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -68,6 +68,8 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o
obj-$(CONFIG_MFD_WM8994) += wm8994.o

+obj-$(CONFIG_MFD_TI_SMUSBDIG) += ti-smusbdig.o
+
obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_TPS6507X) += tps6507x.o
diff --git a/drivers/mfd/ti-smusbdig.c b/drivers/mfd/ti-smusbdig.c
new file mode 100644
index 0000000..19f48c6
--- /dev/null
+++ b/drivers/mfd/ti-smusbdig.c
@@ -0,0 +1,138 @@
+/*
+ * MFD Core driver for TI SM-USB-DIG
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/ti-smusbdig.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define TI_USB_VENDOR_ID 0x0451
+#define TI_USB_DEVICE_ID_SM_USB_DIG 0x2f90
+
+#define TI_SMUSBDIG_USB_TIMEOUT_MS 1000
+
+struct ti_smusbdig_device {
+ struct usb_device *usb_dev;
+ struct usb_interface *interface;
+};
+
+int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig,
+ u8 *buffer, int size)
+{
+ struct device *dev = &ti_smusbdig->interface->dev;
+ int actual_length, ret;
+
+ if (!ti_smusbdig || !buffer || size <= 0)
+ return -EINVAL;
+
+ ret = usb_interrupt_msg(ti_smusbdig->usb_dev,
+ usb_sndctrlpipe(ti_smusbdig->usb_dev, 1),
+ buffer, size, &actual_length,
+ TI_SMUSBDIG_USB_TIMEOUT_MS);
+ if (ret) {
+ dev_err(dev, "USB transaction failed\n");
+ return ret;
+ }
+
+ ret = usb_interrupt_msg(ti_smusbdig->usb_dev,
+ usb_rcvctrlpipe(ti_smusbdig->usb_dev, 1),
+ buffer, TI_SMUSBDIG_PACKET_SIZE, &actual_length,
+ TI_SMUSBDIG_USB_TIMEOUT_MS);
+ if (ret) {
+ dev_err(dev, "USB transaction failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ti_smusbdig_xfer);
+
+static const struct mfd_cell ti_smusbdig_mfd_cells[] = {
+ { .name = "ti-sm-usb-dig-gpio", },
+ { .name = "ti-sm-usb-dig-i2c", },
+ { .name = "ti-sm-usb-dig-spi", },
+ { .name = "ti-sm-usb-dig-w1", },
+};
+
+static int ti_smusbdig_probe(struct usb_interface *interface,
+ const struct usb_device_id *usb_id)
+{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
+ struct device *dev = &interface->dev;
+ struct ti_smusbdig_device *ti_smusbdig;
+ u8 buffer[TI_SMUSBDIG_PACKET_SIZE];
+ int ret;
+
+ if (hostif->desc.bInterfaceNumber != 0 ||
+ hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
+ ti_smusbdig = devm_kzalloc(dev, sizeof(*ti_smusbdig), GFP_KERNEL);
+ if (!ti_smusbdig)
+ return -ENOMEM;
+
+ ti_smusbdig->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ ti_smusbdig->interface = interface;
+ usb_set_intfdata(interface, ti_smusbdig);
+
+ buffer[0] = TI_SMUSBDIG_VERSION;
+ ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 1);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "TI SM-USB-DIG Version: %d.%02d Found\n",
+ buffer[0], buffer[1]);
+
+ /* Turn on power supply output */
+ buffer[0] = TI_SMUSBDIG_COMMAND;
+ buffer[1] = TI_SMUSBDIG_COMMAND_DUTPOWERON;
+ ret = ti_smusbdig_xfer(ti_smusbdig, buffer, 2);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(dev, ti_smusbdig);
+ ret = mfd_add_hotplug_devices(dev, ti_smusbdig_mfd_cells,
+ ARRAY_SIZE(ti_smusbdig_mfd_cells));
+ if (ret) {
+ dev_err(dev, "unable to add MFD devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ti_smusbdig_disconnect(struct usb_interface *interface)
+{
+ mfd_remove_devices(&interface->dev);
+}
+
+static const struct usb_device_id ti_smusbdig_id_table[] = {
+ { USB_DEVICE(TI_USB_VENDOR_ID, TI_USB_DEVICE_ID_SM_USB_DIG) },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(usb, ti_smusbdig_id_table);
+
+static struct usb_driver ti_smusbdig_driver = {
+ .name = "ti-sm-usb-dig",
+ .probe = ti_smusbdig_probe,
+ .disconnect = ti_smusbdig_disconnect,
+ .id_table = ti_smusbdig_id_table,
+};
+module_usb_driver(ti_smusbdig_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@xxxxxx>");
+MODULE_DESCRIPTION("Core driver for TI SM-USB-DIG interface adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ti-smusbdig.h b/include/linux/mfd/ti-smusbdig.h
new file mode 100644
index 0000000..46fd2da
--- /dev/null
+++ b/include/linux/mfd/ti-smusbdig.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#ifndef __LINUX_MFD_TI_SMUSBDIG_H
+#define __LINUX_MFD_TI_SMUSBDIG_H
+
+#define TI_SMUSBDIG_PACKET_SIZE 32
+/* (packet size - packet header */
+#define TI_SMUSBDIG_DATA_SIZE (TI_SMUSBDIG_PACKET_SIZE - 7)
+
+enum ti_smusbdig_function {
+ TI_SMUSBDIG_SPI = 0x01,
+ TI_SMUSBDIG_I2C = 0x02,
+ TI_SMUSBDIG_1W = 0x03,
+ TI_SMUSBDIG_COMMAND = 0x04,
+ TI_SMUSBDIG_VERSION = 0x07,
+};
+
+enum ti_smusbdig_sub_command {
+ TI_SMUSBDIG_COMMAND_DUTPOWERON = 0x01,
+ TI_SMUSBDIG_COMMAND_DUTPOWEROFF = 0x02,
+};
+
+struct ti_smusbdig_packet {
+ u8 function;
+ u8 channel;
+ u8 edge_polarity;
+ u8 num_commands;
+ u8 is_command_mask[3];
+ u8 data[TI_SMUSBDIG_DATA_SIZE];
+} __packed;
+
+static inline void
+ti_smusbdig_packet_add_command(struct ti_smusbdig_packet *packet, int command)
+{
+ int num_commands = packet->num_commands;
+ int mask_number = num_commands / 8;
+ int mask_bit = num_commands % 8;
+
+ if (num_commands >= TI_SMUSBDIG_DATA_SIZE)
+ return;
+
+ packet->is_command_mask[mask_number] |= BIT(7 - mask_bit);
+ packet->data[num_commands] = command;
+ packet->num_commands++;
+}
+
+static inline void
+ti_smusbdig_packet_add_data(struct ti_smusbdig_packet *packet, u8 data)
+{
+ int num_commands = packet->num_commands;
+
+ if (num_commands >= TI_SMUSBDIG_DATA_SIZE)
+ return;
+
+ packet->data[num_commands] = data;
+ packet->num_commands++;
+}
+
+struct ti_smusbdig_device;
+int ti_smusbdig_xfer(struct ti_smusbdig_device *ti_smusbdig,
+ u8 *buffer, int size);
+
+#endif /* __LINUX_MFD_TI_SMUSBDIG_H */
--
2.9.2