Re: [PATCH v6 1/4] Documentation: mfd: LP873X: Add information for the mfd driver

[Keerthy]

On Tuesday 09 August 2016 06:20 PM, Lee Jones wrote:
> On Mon, 08 Aug 2016, Keerthy wrote:
>
> > The lp873x series of PMICs have a bunch of regulators and a couple
> > of GPO(General Purpose Outputs).
> > Add information for the MFD and regulator drivers.
> >
> > Acked-by: Rob Herring <robh@xxxxxxxxxx>
> > Signed-off-by: Keerthy <j-keerthy@xxxxxx>
>
> These should be in chronological order.  Rob could not have Acked the
> patch before you sent it.
>
> > ---
> > Changes in v6:
> >
> >    * Added more formating for properties.
> >
> > Changes in v4:
> >
> >    * Added the GPIO properties.
> >
> > Changes in v3:
> >
> >    * Changed the example node lable to pmic from lp8733.
> >
> >   Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
> >   1 file changed, 59 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
>
> Patch looks good though.
>
> I'll fix the nit above.

Okay thanks.

> Applied, thanks.
>
> > diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
> > new file mode 100644
> > index 0000000..1377c25
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
> > @@ -0,0 +1,59 @@
> > +TI LP873X PMIC MFD driver
> > +
> > +Required properties:
> > +  - compatible:	"ti,lp8732", "ti,lp8733"
> > +  - reg:		I2C slave address.
> > +  - gpio-controller:	Marks the device node as a GPIO Controller.
> > +  - #gpio-cells:	Should be two.  The first cell is the pin number and
> > +			the second cell is used to specify flags.
> > +			See ../gpio/gpio.txt for more information.
> > +  - regulators:	List of child nodes that specify the regulator
> > +			initialization data.
> > +Example:
> > +
> > +pmic: lp8733@60 {
> > +	compatible = "ti,lp8733";
> > +	reg = <0x60>;
> > +	gpio-controller;
> > +	#gpio-cells = <2>;
> > +
> > +	regulators {
> > +		lp8733_buck0: buck0 {
> > +			regulator-name = "lp8733-buck0";
> > +			regulator-min-microvolt = <800000>;
> > +			regulator-max-microvolt = <1400000>;
> > +			regulator-min-microamp = <1500000>;
> > +			regulator-max-microamp = <4000000>;
> > +			regulator-ramp-delay = <10000>;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +		};
> > +
> > +		lp8733_buck1: buck1 {
> > +			regulator-name = "lp8733-buck1";
> > +			regulator-min-microvolt = <800000>;
> > +			regulator-max-microvolt = <1400000>;
> > +			regulator-min-microamp = <1500000>;
> > +			regulator-max-microamp = <4000000>;
> > +			regulator-ramp-delay = <10000>;
> > +			regulator-boot-on;
> > +			regulator-always-on;
> > +		};
> > +
> > +		lp8733_ldo0: ldo0 {
> > +			regulator-name = "lp8733-ldo0";
> > +			regulator-min-microvolt = <800000>;
> > +			regulator-max-microvolt = <3000000>;
> > +			regulator-boot-on;
> > +			regulator-always-on;
> > +		};
> > +
> > +		lp8733_ldo1: ldo1 {
> > +			regulator-name = "lp8733-ldo1";
> > +			regulator-min-microvolt = <800000>;
> > +			regulator-max-microvolt = <3000000>;
> > +			regulator-always-on;
> > +			regulator-boot-on;
> > +		};
> > +	};
> > +};