Re: [PATCH resend 5/5] libata-scsi: fix MODE SELECT translation for Control mode page

[Tejun Heo]

On Fri, Jul 22, 2016 at 02:41:54AM +0800, tom.ty89@xxxxxxxxx wrote:
> From: Tom Yan <tom.ty89@xxxxxxxxx>
> 
> scsi_done() was called repeatedly and apparently because of that,
> the kernel would call trace when we touch the Control mode page:
> 
> Call Trace:
>  [<ffffffff812ea0d2>] dump_stack+0x63/0x81
>  [<ffffffff81079cfb>] __warn+0xcb/0xf0
>  [<ffffffff81079e2d>] warn_slowpath_null+0x1d/0x20
>  [<ffffffffa00f51b0>] ata_eh_finish+0xe0/0xf0 [libata]
>  [<ffffffffa00fb830>] sata_pmp_error_handler+0x640/0xa50 [libata]
>  [<ffffffffa00470ed>] ahci_error_handler+0x1d/0x70 [libahci]
>  [<ffffffffa00f55f0>] ata_scsi_port_error_handler+0x430/0x770 [libata]
>  [<ffffffffa00eff8d>] ? ata_scsi_cmd_error_handler+0xdd/0x160 [libata]
>  [<ffffffffa00f59d7>] ata_scsi_error+0xa7/0xf0 [libata]
>  [<ffffffffa00913ba>] scsi_error_handler+0xaa/0x560 [scsi_mod]
>  [<ffffffffa0091310>] ? scsi_eh_get_sense+0x180/0x180 [scsi_mod]
>  [<ffffffff81098eb8>] kthread+0xd8/0xf0
>  [<ffffffff815d913f>] ret_from_fork+0x1f/0x40
>  [<ffffffff81098de0>] ? kthread_worker_fn+0x170/0x170
> ---[ end trace 8b7501047e928a17 ]---
> 
> Removed the unnecessary code and let ata_scsi_translate() do the job.
> 
> Also, since ata_mselect_control() has no ATA command to send to the
> device, ata_scsi_mode_select_xlat() should return 1 for it, so that
> ata_scsi_translate() will finish early to avoid ata_qc_issue().
> 
> Signed-off-by: Tom Yan <tom.ty89@xxxxxxxxx>

Applied to libata/for-4.9.

Thanks.

-- 
tejun