Re: [v10 PATCH 1/5] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
From: Guenter Roeck
Date: Wed Aug 10 2016 - 18:10:22 EST
On Tue, Aug 9, 2016 at 4:32 PM, Chris Zhong <zyw@xxxxxxxxxxxxxx> wrote:
> This patch adds a binding that describes the Rockchip USB Type-C PHY
> for rk3399
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> Reviewed-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
> Reviewed-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
>
> ---
>
> Changes in v10:
> - remove rockchip,uphy-dp-sel property
>
> Changes in v9:
> - change #phy-cells to 1
>
> Changes in v8: None
> Changes in v7: None
> Changes in v6:
> - add assigned-clocks and assigned-clock-rates
>
> Changes in v5: None
> Changes in v4:
> - add a #phy-cells node
>
> Changes in v3:
> - use compatible: rockchip,rk3399-typec-phy
> - use dashes instead of underscores.
>
> Changes in v2:
> - add some registers description
>
> Changes in v1:
> - add extcon node description
> - move the registers in phy driver
> - remove the suffix of reset
>
> .../devicetree/bindings/phy/phy-rockchip-typec.txt | 82 ++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> new file mode 100644
> index 0000000..bf372e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
> @@ -0,0 +1,82 @@
> +* ROCKCHIP type-c PHY
> +---------------------
> +
> +Required properties:
> + - compatible : must be "rockchip,rk3399-typec-phy"
> + - reg: Address and length of the usb phy control register set
> + - rockchip,grf : phandle to the syscon managing the "general
> + register files"
> + - clocks : phandle + clock specifier for the phy clocks
> + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
> + - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
> + <&cru SCLK_UPHY1_TCPDCORE>;
> + - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
> + - resets : a list of phandle + reset specifier pairs
> + - reset-names : string reset name, must be:
> + "uphy", "uphy-pipe", "uphy-tcphy"
> + - extcon : extcon specifier for the Power Delivery
> + - #phy-cells: must be 1. create 2 PHY node:
> + <&tcphy0 0> and <&tcphy1 0> for DP PHY.
> + <&tcphy0 1> and <&tcphy1 1> for USB3 PHY.
> + See ./phy-bindings.txt for details.
> +
> +Note, there are 2 type-c phys for RK3399, and they are almost identical, except
> +these registers(description below), every register node contains 3 sections:
> +offset, enable bit, write mask bit.
> + - rockchip,typec-conn-dir : the register of type-c connector direction,
> + for type-c phy0, it must be <0xe580 0 16>;
> + for type-c phy1, it must be <0xe58c 0 16>;
> + - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
> + control.
> + for type-c phy0, it must be <0xe580 3 19>;
> + for type-c phy1, it must be <0xe58c 3 19>;
> + - rockchip,external-psm : the register of type-c phy external psm clock
> + selection.
> + for type-c phy0, it must be <0xe588 14 30>;
> + for type-c phy1, it must be <0xe594 14 30>;
> + - rockchip,pipe-status : the register of type-c phy pipe status.
> + for type-c phy0, it must be <0xe5c0 0 0>;
> + for type-c phy1, it must be <0xe5c0 16 16>;
> +
> +Example:
> + tcphy0: phy@ff7c0000 {
> + compatible = "rockchip,rk3399-typec-phy";
> + reg = <0x0 0xff7c0000 0x0 0x40000>;
> + rockchip,grf = <&grf>;
> + #phy-cells = <1>;
> + extcon = <&fusb0>;
> + clocks = <&cru SCLK_UPHY0_TCPDCORE>,
> + <&cru SCLK_UPHY0_TCPDPHY_REF>;
> + clock-names = "tcpdcore", "tcpdphy-ref";
> + assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
> + assigned-clock-rates = <50000000>;
> + resets = <&cru SRST_UPHY0>,
> + <&cru SRST_UPHY0_PIPE_L00>,
> + <&cru SRST_P_UPHY0_TCPHY>;
> + reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
> + rockchip,typec-conn-dir = <0xe580 0 16>;
> + rockchip,usb3tousb2-en = <0xe580 3 19>;
> + rockchip,external-psm = <0xe588 14 30>;
> + rockchip,pipe-status = <0xe5c0 0 0>;
> + };
> +
> + tcphy1: phy@ff800000 {
> + compatible = "rockchip,rk3399-typec-phy";
> + reg = <0x0 0xff800000 0x0 0x40000>;
> + rockchip,grf = <&grf>;
> + #phy-cells = <1>;
> + extcon = <&fusb1>;
> + clocks = <&cru SCLK_UPHY1_TCPDCORE>,
> + <&cru SCLK_UPHY1_TCPDPHY_REF>;
> + clock-names = "tcpdcore", "tcpdphy-ref";
> + assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
> + assigned-clock-rates = <50000000>;
> + resets = <&cru SRST_UPHY1>,
> + <&cru SRST_UPHY1_PIPE_L00>,
> + <&cru SRST_P_UPHY1_TCPHY>;
> + reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
> + rockchip,typec-conn-dir = <0xe58c 0 16>;
> + rockchip,usb3tousb2-en = <0xe58c 3 19>;
> + rockchip,external-psm = <0xe594 14 30>;
> + rockchip,pipe-status = <0xe5c0 16 16>;
> + };
> --
> 1.9.1
>