Re: kmemleak: Cannot insert 0xff7f1000 into the object search tree (overlaps existing)

[Grygorii Strashko]

On 08/11/2016 06:54 PM, Catalin Marinas wrote:
> On Thu, Aug 11, 2016 at 05:20:51PM +0530, Vignesh R wrote:
>> I see the below message from kmemleak when booting linux-next on AM335x
>> GP EVM and DRA7 EVM
> 
> Can you also reproduce it with 4.8-rc1?
> 
>> [    0.803934] kmemleak: Cannot insert 0xff7f1000 into the object search tree (overlaps existing)
>> [    0.803950] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1-next-20160809 #497
>> [    0.803958] Hardware name: Generic DRA72X (Flattened Device Tree)
>> [    0.803979] [<c0110104>] (unwind_backtrace) from [<c010c24c>] (show_stack+0x10/0x14)
>> [    0.803994] [<c010c24c>] (show_stack) from [<c0490df0>] (dump_stack+0xac/0xe0)
>> [    0.804010] [<c0490df0>] (dump_stack) from [<c0296f88>] (create_object+0x214/0x278)
>> [    0.804025] [<c0296f88>] (create_object) from [<c07c770c>] (kmemleak_alloc_percpu+0x54/0xc0)
>> [    0.804038] [<c07c770c>] (kmemleak_alloc_percpu) from [<c025fb08>] (pcpu_alloc+0x368/0x5fc)
>> [    0.804052] [<c025fb08>] (pcpu_alloc) from [<c0b1bfbc>] (crash_notes_memory_init+0x10/0x40)
>> [    0.804064] [<c0b1bfbc>] (crash_notes_memory_init) from [<c010188c>] (do_one_initcall+0x3c/0x178)
>> [    0.804075] [<c010188c>] (do_one_initcall) from [<c0b00e98>] (kernel_init_freeable+0x1fc/0x2c8)
>> [    0.804086] [<c0b00e98>] (kernel_init_freeable) from [<c07c66b0>] (kernel_init+0x8/0x114)
>> [    0.804098] [<c07c66b0>] (kernel_init) from [<c0107910>] (ret_from_fork+0x14/0x24)
> 
> This is the allocation stack trace, going via pcpu_alloc().
> 
>> [    0.804106] kmemleak: Kernel memory leak detector disabled
>> [    0.804113] kmemleak: Object 0xfe800000 (size 16777216):
>> [    0.804121] kmemleak:   comm "swapper/0", pid 0, jiffies 4294937296
>> [    0.804127] kmemleak:   min_count = -1
>> [    0.804132] kmemleak:   count = 0
>> [    0.804138] kmemleak:   flags = 0x5
>> [    0.804143] kmemleak:   checksum = 0
>> [    0.804149] kmemleak:   backtrace:
>> [    0.804155]      [<c0b26a90>] cma_declare_contiguous+0x16c/0x214
>> [    0.804170]      [<c0b3c9c0>] dma_contiguous_reserve_area+0x30/0x64
>> [    0.804183]      [<c0b3ca74>] dma_contiguous_reserve+0x80/0x94
>> [    0.804195]      [<c0b06810>] arm_memblock_init+0x130/0x184
>> [    0.804207]      [<c0b04214>] setup_arch+0x590/0xc08
>> [    0.804217]      [<c0b00940>] start_kernel+0x58/0x3b4
>> [    0.804227]      [<8000807c>] 0x8000807c
>> [    0.804237]      [<ffffffff>] 0xffffffff
> 
> This seems to be the original object that was allocated via
> cma_declare_contiguous(): 16MB range from 0xfe800000 to 0xff800000.
> Since the pointer returned by pcpu_alloc is 0xff7f1000 falls in the 16MB
> CMA range, kmemleak gets confused (it doesn't allow overlapping
> objects).
> 
> So what I think goes wrong is that the kmemleak_alloc(__va(found)) call
> in memblock_alloc_range_nid() doesn't get the right value for the VA of
> the CMA block. The memblock_alloc_range() call in
> cma_declare_contiguous() asks for memory above high_memory, hence on a
> 32-bit architecture with highmem enabled, __va() use is not really
> valid, returning the wrong address. The existing kmemleak object is
> bogus, it shouldn't have been created in the first place.
> 
> Now I'm trying to figure out how to differentiate between lowmem
> memblocks and highmem ones. Ignoring the kmemleak_alloc() calls
> altogether in mm/memblock.c is probably not an option as it would lead
> to lots of false positives.
> 

But cma_declare_contiguous() calls -
		/*
		 * kmemleak scans/reads tracked objects for pointers to other
		 * objects but this address isn't mapped and accessible
		 */
		kmemleak_ignore(phys_to_virt(addr));

Does it means above code is incorrect also?

It's a little bit strange that this can be seen only now, because
commit 95b0e655f9 ("ARM: mm: don't limit default CMA region only to low memor")
is pretty old.

-- 
regards,
-grygorii