Re: [RFC PATCH v7 7/7] Restartable sequences: self-tests
From: Mathieu Desnoyers
Date: Fri Aug 12 2016 - 14:11:54 EST
----- On Aug 12, 2016, at 12:35 PM, Boqun Feng boqun.feng@xxxxxxxxx wrote:
> On Fri, Aug 12, 2016 at 01:30:15PM +0800, Boqun Feng wrote:
> [snip]
>> > > Besides, do we allow userspace programs do read-only access to the
>> > > memory objects modified by do_rseq(). If so, we have a problem when
>> > > there are two writes in a do_rseq()(either in the rseq critical section
>> > > or in the asm block), because in current implemetation, these two writes
>> > > are unordered, which makes the readers outside a do_rseq() could observe
>> > > the ordering of writes differently.
>> > >
>> > > For rseq_finish2(), a simple solution would be making the "final" write
>> > > a RELEASE.
>> >
>> > Indeed, we would need a release semantic for the final store here if this
>> > is the common use. Or we could duplicate the "flavors" of rseq_finish2 and
>> > add a rseq_finish2_release. We should find a way to eliminate code duplication
>>
>> I'm in favor of a separate rseq_finish2_release().
>>
>> > there. I suspect we'll end up doing macros.
>> >
>>
>> Me too. Lemme have a try ;-)
>>
>
> How about this? Although a little messy, I separated the asm block into
> several parts and implemented each part in a arch-diagnose way.
I find it rather hard to follow the per-arch assembly with this approach.
It might prove to be troublesome if we want to do arch-specific optimizations
in the future.
I've come up with the following macro approach instead, feedback welcome!
commit 4d27431d6aefaee617540ef04518962b0e4d14f4
Author: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
Date: Thu Aug 11 19:11:27 2016 -0400
rseq_finish2, rseq_finish2_release (WIP)
diff --git a/tools/testing/selftests/rseq/param_test.c b/tools/testing/selftests/rseq/param_test.c
index 5f88b6b..59efc98 100644
--- a/tools/testing/selftests/rseq/param_test.c
+++ b/tools/testing/selftests/rseq/param_test.c
@@ -41,7 +41,8 @@ static __thread unsigned int yield_mod_cnt, nr_retry;
, [loop_cnt_1]"m"(loop_cnt[1]) \
, [loop_cnt_2]"m"(loop_cnt[2]) \
, [loop_cnt_3]"m"(loop_cnt[3]) \
- , [loop_cnt_4]"m"(loop_cnt[4])
+ , [loop_cnt_4]"m"(loop_cnt[4]) \
+ , [loop_cnt_5]"m"(loop_cnt[5])
#if defined(__x86_64__) || defined(__i386__)
@@ -548,7 +549,7 @@ static void show_usage(int argc, char **argv)
printf(" [-2 loops] Number of loops for delay injection 2\n");
printf(" [-3 loops] Number of loops for delay injection 3\n");
printf(" [-4 loops] Number of loops for delay injection 4\n");
- printf(" [-5 loops] Number of loops for delay injection 5 (-1 to enable -m)\n");
+ printf(" [-5 loops] Number of loops for delay injection 5\n");
printf(" [-6 loops] Number of loops for delay injection 6 (-1 to enable -m)\n");
printf(" [-7 loops] Number of loops for delay injection 7 (-1 to enable -m)\n");
printf(" [-8 loops] Number of loops for delay injection 8 (-1 to enable -m)\n");
diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h
index 5853b17..6da993d 100644
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -269,7 +269,7 @@ struct rseq_state rseq_start(struct rseq_lock *rlock)
result.event_counter =
ACCESS_ONCE(result.rseqp->u.e.event_counter);
/* load event_counter before cpu_id. */
- RSEQ_INJECT_C(5)
+ RSEQ_INJECT_C(6)
result.cpu_id = ACCESS_ONCE(result.rseqp->u.e.cpu_id);
}
/*
@@ -281,7 +281,7 @@ struct rseq_state rseq_start(struct rseq_lock *rlock)
* preemption/signalling will cause them to restart, so they
* don't interfere with the lock.
*/
- RSEQ_INJECT_C(6)
+ RSEQ_INJECT_C(7)
if (!has_fast_acquire_release() && likely(rseq_has_sys_membarrier)) {
result.lock_state = ACCESS_ONCE(rlock->state);
@@ -304,192 +304,342 @@ struct rseq_state rseq_start(struct rseq_lock *rlock)
return result;
}
-static inline __attribute__((always_inline))
-bool rseq_finish(struct rseq_lock *rlock,
- intptr_t *p, intptr_t to_write,
- struct rseq_state start_value)
-{
- RSEQ_INJECT_C(9)
+/*
+ * The __rseq_table section can be used by debuggers to better handle
+ * single-stepping through the restartable critical sections.
+ */
- if (unlikely(start_value.lock_state != RSEQ_LOCK_STATE_RESTART)) {
- if (start_value.lock_state == RSEQ_LOCK_STATE_LOCK)
- rseq_fallback_wait(rlock);
- return false;
- }
+#ifdef __x86_64__
- /*
- * The __rseq_table section can be used by debuggers to better
- * handle single-stepping through the restartable critical
- * sections.
- */
+#define RSEQ_FINISH_ASM(_target_final, _to_write_final, _start_value, \
+ _failure, extra_store, extra_input) \
+ __asm__ __volatile__ goto ( \
+ ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".balign 32\n\t" \
+ "3:\n\t" \
+ ".quad 1f, 2f, %l[failure], 0x0\n\t" \
+ ".popsection\n\t" \
+ "1:\n\t" \
+ RSEQ_INJECT_ASM(1) \
+ "movq $3b, (%[rseq_cs])\n\t" \
+ RSEQ_INJECT_ASM(2) \
+ "cmpl %[start_event_counter], %[current_event_counter]\n\t" \
+ "jnz %l[failure]\n\t" \
+ RSEQ_INJECT_ASM(3) \
+ extra_store \
+ "movq %[to_write_final], (%[target_final])\n\t" \
+ "2:\n\t" \
+ RSEQ_INJECT_ASM(5) \
+ "movq $0, (%[rseq_cs])\n\t" \
+ : /* no outputs */ \
+ : [start_event_counter]"r"((_start_value).event_counter), \
+ [current_event_counter]"m"((_start_value).rseqp->u.e.event_counter), \
+ [to_write_final]"r"(_to_write_final), \
+ [target_final]"r"(_target_final), \
+ [rseq_cs]"r"(&(_start_value).rseqp->rseq_cs) \
+ extra_input \
+ RSEQ_INJECT_INPUT \
+ : "memory", "cc" \
+ RSEQ_INJECT_CLOBBER \
+ : _failure \
+ );
-#ifdef __x86_64__
- __asm__ __volatile__ goto (
- ".pushsection __rseq_table, \"aw\"\n\t"
- ".balign 32\n\t"
- "3:\n\t"
- ".quad 1f, 2f, %l[failure], 0x0\n\t"
- ".popsection\n\t"
- "1:\n\t"
- RSEQ_INJECT_ASM(1)
- "movq $3b, (%[rseq_cs])\n\t"
- RSEQ_INJECT_ASM(2)
- "cmpl %[start_event_counter], %[current_event_counter]\n\t"
- "jnz %l[failure]\n\t"
- RSEQ_INJECT_ASM(3)
- "movq %[to_write], (%[target])\n\t"
- "2:\n\t"
+#define RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "movq %[to_write_spec], (%[target_spec])\n\t" \
RSEQ_INJECT_ASM(4)
- "movq $0, (%[rseq_cs])\n\t"
- : /* no outputs */
- : [start_event_counter]"r"(start_value.event_counter),
- [current_event_counter]"m"(start_value.rseqp->u.e.event_counter),
- [to_write]"r"(to_write),
- [target]"r"(p),
- [rseq_cs]"r"(&start_value.rseqp->rseq_cs)
- RSEQ_INJECT_INPUT
- : "memory", "cc"
- RSEQ_INJECT_CLOBBER
- : failure
- );
+
+/* x86-64 is TSO */
+#define RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM() \
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM()
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(_target_spec, _to_write_spec) \
+ , [to_write_spec]"r"(_to_write_spec), \
+ [target_spec]"r"(_target_spec)
+
#elif defined(__i386__)
- __asm__ __volatile__ goto (
- ".pushsection __rseq_table, \"aw\"\n\t"
- ".balign 32\n\t"
- "3:\n\t"
- ".long 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0, 0x0\n\t"
- ".popsection\n\t"
- "1:\n\t"
- RSEQ_INJECT_ASM(1)
- "movl $3b, (%[rseq_cs])\n\t"
- RSEQ_INJECT_ASM(2)
- "cmpl %[start_event_counter], %[current_event_counter]\n\t"
- "jnz %l[failure]\n\t"
- RSEQ_INJECT_ASM(3)
- "movl %[to_write], (%[target])\n\t"
- "2:\n\t"
- RSEQ_INJECT_ASM(4)
- "movl $0, (%[rseq_cs])\n\t"
- : /* no outputs */
- : [start_event_counter]"r"(start_value.event_counter),
- [current_event_counter]"m"(start_value.rseqp->u.e.event_counter),
- [to_write]"r"(to_write),
- [target]"r"(p),
- [rseq_cs]"r"(&start_value.rseqp->rseq_cs)
- RSEQ_INJECT_INPUT
- : "memory", "cc"
- RSEQ_INJECT_CLOBBER
- : failure
+
+#define RSEQ_FINISH_ASM(_target_final, _to_write_final, _start_value, \
+ _failure, extra_store, extra_input) \
+ __asm__ __volatile__ goto ( \
+ ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".balign 32\n\t" \
+ "3:\n\t" \
+ ".long 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0, 0x0\n\t" \
+ ".popsection\n\t" \
+ "1:\n\t" \
+ RSEQ_INJECT_ASM(1) \
+ "movl $3b, (%[rseq_cs])\n\t" \
+ RSEQ_INJECT_ASM(2) \
+ "cmpl %[start_event_counter], %[current_event_counter]\n\t" \
+ "jnz %l[failure]\n\t" \
+ RSEQ_INJECT_ASM(3) \
+ extra_store \
+ "movl %[to_write_final], (%[target_final])\n\t" \
+ "2:\n\t" \
+ RSEQ_INJECT_ASM(5) \
+ "movl $0, (%[rseq_cs])\n\t" \
+ : /* no outputs */ \
+ : [start_event_counter]"r"((_start_value).event_counter), \
+ [current_event_counter]"m"((_start_value).rseqp->u.e.event_counter), \
+ [to_write_final]"r"(_to_write_final), \
+ [target_final]"r"(_target_final), \
+ [rseq_cs]"r"(&(_start_value).rseqp->rseq_cs) \
+ extra_input \
+ RSEQ_INJECT_INPUT \
+ : "memory", "cc" \
+ RSEQ_INJECT_CLOBBER \
+ : _failure \
);
-#elif defined(__ARMEL__)
- __asm__ __volatile__ goto (
- ".pushsection __rseq_table, \"aw\"\n\t"
- ".balign 32\n\t"
- ".word 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0, 0x0\n\t"
- ".popsection\n\t"
- "1:\n\t"
- RSEQ_INJECT_ASM(1)
- "adr r0, 3f\n\t"
- "str r0, [%[rseq_cs]]\n\t"
- RSEQ_INJECT_ASM(2)
- "ldr r0, %[current_event_counter]\n\t"
- "mov r1, #0\n\t"
- "cmp %[start_event_counter], r0\n\t"
- "bne %l[failure]\n\t"
- RSEQ_INJECT_ASM(3)
- "str %[to_write], [%[target]]\n\t"
- "2:\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "movl %[to_write_spec], (%[target_spec])\n\t" \
RSEQ_INJECT_ASM(4)
- "str r1, [%[rseq_cs]]\n\t"
- "b 4f\n\t"
- ".balign 32\n\t"
- "3:\n\t"
- ".word 1b, 0x0, 2b, 0x0, l[failure], 0x0, 0x0, 0x0\n\t"
- "4:\n\t"
- : /* no outputs */
- : [start_event_counter]"r"(start_value.event_counter),
- [current_event_counter]"m"(start_value.rseqp->u.e.event_counter),
- [to_write]"r"(to_write),
- [target]"r"(p),
- [rseq_cs]"r"(&start_value.rseqp->rseq_cs)
- RSEQ_INJECT_INPUT
- : "r0", "r1", "memory", "cc"
- RSEQ_INJECT_CLOBBER
- : failure
+
+#define RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM() \
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "lock; addl $0,0(%%esp)\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(_target_spec, _to_write_spec) \
+ , [to_write_spec]"r"(_to_write_spec), \
+ [target_spec]"r"(_target_spec)
+
+#elif defined(__ARMEL__)
+
+#define RSEQ_FINISH_ASM(_target_final, _to_write_final, _start_value, \
+ _failure, extra_store, extra_input) \
+ __asm__ __volatile__ goto ( \
+ ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".balign 32\n\t" \
+ ".word 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0, 0x0\n\t" \
+ ".popsection\n\t" \
+ "1:\n\t" \
+ RSEQ_INJECT_ASM(1) \
+ "adr r0, 3f\n\t" \
+ "str r0, [%[rseq_cs]]\n\t" \
+ RSEQ_INJECT_ASM(2) \
+ "ldr r0, %[current_event_counter]\n\t" \
+ "mov r1, #0\n\t" \
+ "cmp %[start_event_counter], r0\n\t" \
+ "bne %l[failure]\n\t" \
+ RSEQ_INJECT_ASM(3) \
+ extra_store \
+ "str %[to_write_final], [%[target_final]]\n\t" \
+ "2:\n\t" \
+ RSEQ_INJECT_ASM(5) \
+ "str r1, [%[rseq_cs]]\n\t" \
+ "b 4f\n\t" \
+ ".balign 32\n\t" \
+ "3:\n\t" \
+ ".word 1b, 0x0, 2b, 0x0, l[failure], 0x0, 0x0, 0x0\n\t" \
+ "4:\n\t" \
+ : /* no outputs */ \
+ : [start_event_counter]"r"((_start_value).event_counter), \
+ [current_event_counter]"m"((_start_value).rseqp->u.e.event_counter), \
+ [to_write_final]"r"(_to_write_final), \
+ [target_final]"r"(_target_final), \
+ [rseq_cs]"r"(&(_start_value).rseqp->rseq_cs) \
+ extra_input \
+ RSEQ_INJECT_INPUT \
+ : "r0", "r1", "memory", "cc" \
+ RSEQ_INJECT_CLOBBER \
+ : _failure \
);
-#elif __PPC64__
- __asm__ __volatile__ goto (
- ".pushsection __rseq_table, \"aw\"\n\t"
- ".balign 32\n\t"
- "3:\n\t"
- ".quad 1f, 2f, %l[failure], 0x0\n\t"
- ".popsection\n\t"
- "1:\n\t"
- RSEQ_INJECT_ASM(1)
- "lis %%r17, (3b)@highest\n\t"
- "ori %%r17, %%r17, (3b)@higher\n\t"
- "rldicr %%r17, %%r17, 32, 31\n\t"
- "oris %%r17, %%r17, (3b)@h\n\t"
- "ori %%r17, %%r17, (3b)@l\n\t"
- "std %%r17, 0(%[rseq_cs])\n\t"
- RSEQ_INJECT_ASM(2)
- "lwz %%r17, %[current_event_counter]\n\t"
- "cmpw cr7, %[start_event_counter], %%r17\n\t"
- "bne- cr7, %l[failure]\n\t"
- RSEQ_INJECT_ASM(3)
- "std %[to_write], 0(%[target])\n\t"
- "2:\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "str %[to_write_spec], [%[target_spec]]\n\t" \
RSEQ_INJECT_ASM(4)
- "li %%r17, 0\n\t"
- "std %%r17, 0(%[rseq_cs])\n\t"
- : /* no outputs */
- : [start_event_counter]"r"(start_value.event_counter),
- [current_event_counter]"m"(start_value.rseqp->u.e.event_counter),
- [to_write]"r"(to_write),
- [target]"b"(p),
- [rseq_cs]"b"(&start_value.rseqp->rseq_cs)
- RSEQ_INJECT_INPUT
- : "r17", "memory", "cc"
- RSEQ_INJECT_CLOBBER
- : failure
+
+#define RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM() \
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "dmb\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(_target_spec, _to_write_spec) \
+ , [to_write_spec]"r"(_to_write_spec), \
+ [target_spec]"r"(_target_spec)
+
+#elif __PPC64__
+
+#define RSEQ_FINISH_ASM(_target_final, _to_write_final, _start_value, \
+ _failure, extra_store, extra_input) \
+ __asm__ __volatile__ goto ( \
+ ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".balign 32\n\t" \
+ "3:\n\t" \
+ ".quad 1f, 2f, %l[failure], 0x0\n\t" \
+ ".popsection\n\t" \
+ "1:\n\t" \
+ RSEQ_INJECT_ASM(1) \
+ "lis %%r17, (3b)@highest\n\t" \
+ "ori %%r17, %%r17, (3b)@higher\n\t" \
+ "rldicr %%r17, %%r17, 32, 31\n\t" \
+ "oris %%r17, %%r17, (3b)@h\n\t" \
+ "ori %%r17, %%r17, (3b)@l\n\t" \
+ "std %%r17, 0(%[rseq_cs])\n\t" \
+ RSEQ_INJECT_ASM(2) \
+ "lwz %%r17, %[current_event_counter]\n\t" \
+ "cmpw cr7, %[start_event_counter], %%r17\n\t" \
+ "bne- cr7, %l[failure]\n\t" \
+ RSEQ_INJECT_ASM(3) \
+ extra_store \
+ "std %[to_write_final], 0(%[target_final])\n\t" \
+ "2:\n\t" \
+ RSEQ_INJECT_ASM(5) \
+ "li %%r17, 0\n\t" \
+ "std %%r17, 0(%[rseq_cs])\n\t" \
+ : /* no outputs */ \
+ : [start_event_counter]"r"((_start_value).event_counter), \
+ [current_event_counter]"m"((_start_value).rseqp->u.e.event_counter), \
+ [to_write_final]"r"(_to_write_final), \
+ [target_final]"b"(_target_final), \
+ [rseq_cs]"b"(&(_start_value).rseqp->rseq_cs) \
+ extra_input \
+ RSEQ_INJECT_INPUT \
+ : "r17", "memory", "cc" \
+ RSEQ_INJECT_CLOBBER \
+ : _failure \
);
-#elif __PPC__
- __asm__ __volatile__ goto (
- ".pushsection __rseq_table, \"aw\"\n\t"
- ".balign 32\n\t"
- "3:\n\t"
- /* 32-bit only supported on BE */
- ".long 0x0, 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0\n\t"
- ".popsection\n\t"
- "1:\n\t"
- RSEQ_INJECT_ASM(1)
- "lis %%r17, (3b)@ha\n\t"
- "addi %%r17, %%r17, (3b)@l\n\t"
- "stw %%r17, 0(%[rseq_cs])\n\t"
- RSEQ_INJECT_ASM(2)
- "lwz %%r17, %[current_event_counter]\n\t"
- "cmpw cr7, %[start_event_counter], %%r17\n\t"
- "bne- cr7, %l[failure]\n\t"
- RSEQ_INJECT_ASM(3)
- "stw %[to_write], 0(%[target])\n\t"
- "2:\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "std %[to_write_spec], 0(%[target_spec])\n\t" \
RSEQ_INJECT_ASM(4)
- "li %%r17, 0\n\t"
- "stw %%r17, 0(%[rseq_cs])\n\t"
- : /* no outputs */
- : [start_event_counter]"r"(start_value.event_counter),
- [current_event_counter]"m"(start_value.rseqp->u.e.event_counter),
- [to_write]"r"(to_write),
- [target]"b"(p),
- [rseq_cs]"b"(&start_value.rseqp->rseq_cs)
- RSEQ_INJECT_INPUT
- : "r17", "memory", "cc"
- RSEQ_INJECT_CLOBBER
- : failure
+
+#define RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM() \
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "lwsync\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(_target_spec, _to_write_spec) \
+ , [to_write_spec]"r"(_to_write_spec), \
+ [target_spec]"b"(_target_spec)
+
+#elif __PPC__
+
+#define RSEQ_FINISH_ASM(_target_final, _to_write_final, _start_value, \
+ _failure, extra_store, extra_input) \
+ __asm__ __volatile__ goto ( \
+ ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".balign 32\n\t" \
+ "3:\n\t" \
+ /* 32-bit only supported on BE */ \
+ ".long 0x0, 1f, 0x0, 2f, 0x0, %l[failure], 0x0, 0x0\n\t" \
+ ".popsection\n\t" \
+ "1:\n\t" \
+ RSEQ_INJECT_ASM(1) \
+ "lis %%r17, (3b)@ha\n\t" \
+ "addi %%r17, %%r17, (3b)@l\n\t" \
+ "stw %%r17, 0(%[rseq_cs])\n\t" \
+ RSEQ_INJECT_ASM(2) \
+ "lwz %%r17, %[current_event_counter]\n\t" \
+ "cmpw cr7, %[start_event_counter], %%r17\n\t" \
+ "bne- cr7, %l[failure]\n\t" \
+ RSEQ_INJECT_ASM(3) \
+ extra_store \
+ "stw %[to_write_final], 0(%[target_final])\n\t" \
+ "2:\n\t" \
+ RSEQ_INJECT_ASM(5) \
+ "li %%r17, 0\n\t" \
+ "stw %%r17, 0(%[rseq_cs])\n\t" \
+ : /* no outputs */ \
+ : [start_event_counter]"r"((_start_value).event_counter), \
+ [current_event_counter]"m"((_start_value).rseqp->u.e.event_counter), \
+ [to_write_final]"r"(_to_write_final), \
+ [target_final]"b"(_target_final), \
+ [rseq_cs]"b"(&(_start_value).rseqp->rseq_cs) \
+ extra_input \
+ RSEQ_INJECT_INPUT \
+ : "r17", "memory", "cc" \
+ RSEQ_INJECT_CLOBBER \
+ : _failure \
);
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "stw %[to_write_spec], 0(%[target_spec])\n\t" \
+ RSEQ_INJECT_ASM(4)
+
+#define RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM() \
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM() \
+ "lwsync\n\t"
+
+#define RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(_target_spec, _to_write_spec) \
+ , [to_write_spec]"r"(_to_write_spec), \
+ [target_spec]"b"(_target_spec)
+
#else
#error unsupported target
#endif
+
+static inline __attribute__((always_inline))
+bool rseq_finish(struct rseq_lock *rlock,
+ intptr_t *p, intptr_t to_write,
+ struct rseq_state start_value)
+{
+ RSEQ_INJECT_C(8)
+
+ if (unlikely(start_value.lock_state != RSEQ_LOCK_STATE_RESTART)) {
+ if (start_value.lock_state == RSEQ_LOCK_STATE_LOCK)
+ rseq_fallback_wait(rlock);
+ return false;
+ }
+
+ RSEQ_FINISH_ASM(p, to_write, start_value, failure, , );
+
+ return true;
+failure:
+ RSEQ_INJECT_FAILED
+ ACCESS_ONCE(start_value.rseqp->rseq_cs) = 0;
+ return false;
+}
+
+/*
+ * p_spec and to_write_spec are used for a speculative write attempted
+ * near the end of the restartable sequence. A rseq_finish2 may fail
+ * even after this write takes place.
+ *
+ * p_final and to_write_final are used for the final write. If this
+ * write takes place, the rseq_finish2 is guaranteed to succeed.
+ */
+static inline __attribute__((always_inline))
+bool rseq_finish2(struct rseq_lock *rlock,
+ intptr_t *p_spec, intptr_t to_write_spec,
+ intptr_t *p_final, intptr_t to_write_final,
+ struct rseq_state start_value)
+{
+ RSEQ_INJECT_C(9)
+
+ if (unlikely(start_value.lock_state != RSEQ_LOCK_STATE_RESTART)) {
+ if (start_value.lock_state == RSEQ_LOCK_STATE_LOCK)
+ rseq_fallback_wait(rlock);
+ return false;
+ }
+
+ RSEQ_FINISH_ASM(p_final, to_write_final, start_value, failure,
+ RSEQ_FINISH2_SPECULATIVE_STORE_ASM(),
+ RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(p_spec, to_write_spec)
+ );
+ return true;
+failure:
+ RSEQ_INJECT_FAILED
+ ACCESS_ONCE(start_value.rseqp->rseq_cs) = 0;
+ return false;
+}
+
+static inline __attribute__((always_inline))
+bool rseq_finish2_release(struct rseq_lock *rlock,
+ intptr_t *p_spec, intptr_t to_write_spec,
+ intptr_t *p_final, intptr_t to_write_final,
+ struct rseq_state start_value)
+{
+ RSEQ_INJECT_C(9)
+
+ if (unlikely(start_value.lock_state != RSEQ_LOCK_STATE_RESTART)) {
+ if (start_value.lock_state == RSEQ_LOCK_STATE_LOCK)
+ rseq_fallback_wait(rlock);
+ return false;
+ }
+
+ RSEQ_FINISH_ASM(p_final, to_write_final, start_value, failure,
+ RSEQ_FINISH2_RELEASE_SPECULATIVE_STORE_ASM(),
+ RSEQ_FINISH2_SPECULATIVE_STORE_INPUT_ASM(p_spec, to_write_spec)
+ );
return true;
failure:
RSEQ_INJECT_FAILED
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com