Re: [PATCH v3 10/14] media: platform: pxa_camera: remove set_crop

[Hans Verkuil]

On 08/08/2016 09:30 PM, Robert Jarzmik wrote:
> This is to be seen as a regression as the set_crop function is
> removed. This is a temporary situation in the v4l2 porting, and will
> have to be added later.

This is a bit confusing, since in the next patch you say in the commit log:

 - the s_crop() call was removed, judged not working
   (see what happens soc_camera_s_crop() when get_crop() == NULL)

So the set_crop removal isn't temporary after all? It isn't added back in
this patch series.

Note that I am OK with removing set_crop if it never worked reliably, but
then the commit log of this patch should be updated to reflect that.

Regards,

	Hans

> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
> ---
>  drivers/media/platform/soc_camera/pxa_camera.c | 76 --------------------------
>  1 file changed, 76 deletions(-)
> 
> diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c
> index 8a65f126d091..7a810eb32cc0 100644
> --- a/drivers/media/platform/soc_camera/pxa_camera.c
> +++ b/drivers/media/platform/soc_camera/pxa_camera.c
> @@ -1297,81 +1297,6 @@ static int pxa_camera_check_frame(u32 width, u32 height)
>  		(width & 0x01);
>  }
>  
> -static int pxa_camera_set_crop(struct soc_camera_device *icd,
> -			       const struct v4l2_crop *a)
> -{
> -	const struct v4l2_rect *rect = &a->c;
> -	struct device *dev = icd->parent;
> -	struct soc_camera_host *ici = to_soc_camera_host(dev);
> -	struct pxa_camera_dev *pcdev = ici->priv;
> -	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> -	struct soc_camera_sense sense = {
> -		.master_clock = pcdev->mclk,
> -		.pixel_clock_max = pcdev->ciclk / 4,
> -	};
> -	struct v4l2_subdev_format fmt = {
> -		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> -	};
> -	struct v4l2_mbus_framefmt *mf = &fmt.format;
> -	struct pxa_cam *cam = icd->host_priv;
> -	u32 fourcc = icd->current_fmt->host_fmt->fourcc;
> -	int ret;
> -
> -	/* If PCLK is used to latch data from the sensor, check sense */
> -	if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
> -		icd->sense = &sense;
> -
> -	ret = sensor_call(pcdev, video, s_crop, a);
> -
> -	icd->sense = NULL;
> -
> -	if (ret < 0) {
> -		dev_warn(pcdev_to_dev(pcdev), "Failed to crop to %ux%u@%u:%u\n",
> -			 rect->width, rect->height, rect->left, rect->top);
> -		return ret;
> -	}
> -
> -	ret = sensor_call(pcdev, pad, get_fmt, NULL, &fmt);
> -	if (ret < 0)
> -		return ret;
> -
> -	if (pxa_camera_check_frame(mf->width, mf->height)) {
> -		/*
> -		 * Camera cropping produced a frame beyond our capabilities.
> -		 * FIXME: just extract a subframe, that we can process.
> -		 */
> -		v4l_bound_align_image(&mf->width, 48, 2048, 1,
> -			&mf->height, 32, 2048, 0,
> -			fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
> -		ret = sensor_call(pcdev, pad, set_fmt, NULL, &fmt);
> -		if (ret < 0)
> -			return ret;
> -
> -		if (pxa_camera_check_frame(mf->width, mf->height)) {
> -			dev_warn(pcdev_to_dev(pcdev),
> -				 "Inconsistent state. Use S_FMT to repair\n");
> -			return -EINVAL;
> -		}
> -	}
> -
> -	if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
> -		if (sense.pixel_clock > sense.pixel_clock_max) {
> -			dev_err(pcdev_to_dev(pcdev),
> -				"pixel clock %lu set by the camera too high!",
> -				sense.pixel_clock);
> -			return -EIO;
> -		}
> -		recalculate_fifo_timeout(pcdev, sense.pixel_clock);
> -	}
> -
> -	icd->user_width		= mf->width;
> -	icd->user_height	= mf->height;
> -
> -	pxa_camera_setup_cicr(icd, cam->flags, fourcc);
> -
> -	return ret;
> -}
> -
>  static int pxa_camera_set_fmt(struct soc_camera_device *icd,
>  			      struct v4l2_format *f)
>  {
> @@ -1584,7 +1509,6 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
>  	.remove		= pxa_camera_remove_device,
>  	.clock_start	= pxa_camera_clock_start,
>  	.clock_stop	= pxa_camera_clock_stop,
> -	.set_crop	= pxa_camera_set_crop,
>  	.get_formats	= pxa_camera_get_formats,
>  	.put_formats	= pxa_camera_put_formats,
>  	.set_fmt	= pxa_camera_set_fmt,
>