[PATCH 1/2] ASoC: rt5677: Add ACPI support
From: John Keeping
Date: Sun Aug 14 2016 - 07:18:46 EST
The Chromebook Pixel 2015 uses this codec with the ACPI ID RT5677CE, so
add an ACPI match table and support for reading properties from ACPI.
Signed-off-by: John Keeping <john@xxxxxxxxxxxx>
---
sound/soc/codecs/rt5677.c | 109 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 88 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index da9483c1c6fb..72c4e15a0cc8 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/acpi.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -40,6 +41,15 @@
#define RT5677_PR_BASE (RT5677_PR_RANGE_BASE + (0 * RT5677_PR_SPACING))
+/* GPIO indexes defined by ACPI */
+enum {
+ RT5677_GPIO_PLUG_DET,
+ RT5677_GPIO_MIC_PRESENT_L,
+ RT5677_GPIO_HOTWORD_DET_L,
+ RT5677_GPIO_DSP_INT,
+ RT5677_GPIO_HP_AMP_SHDN_L,
+};
+
static const struct regmap_range_cfg rt5677_ranges[] = {
{
.name = "PR",
@@ -5022,29 +5032,57 @@ static const struct i2c_device_id rt5677_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id);
+static const struct acpi_gpio_params plug_det_gpio = { RT5677_GPIO_PLUG_DET, 0, false };
+static const struct acpi_gpio_params mic_present_gpio = { RT5677_GPIO_MIC_PRESENT_L, 0, false };
+static const struct acpi_gpio_params headphone_enable_gpio = { RT5677_GPIO_HP_AMP_SHDN_L, 0, false };
+
+static const struct acpi_gpio_mapping bdw_rt5677_gpios[] = {
+ { "plug-det-gpios", &plug_det_gpio, 1 },
+ { "mic-present-gpios", &mic_present_gpio, 1 },
+ { "headphone-enable-gpios", &headphone_enable_gpio, 1 },
+ { NULL },
+};
+
static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
struct device *dev)
{
- rt5677->pdata.in1_diff = device_property_read_bool(dev,
- "realtek,in1-differential");
- rt5677->pdata.in2_diff = device_property_read_bool(dev,
- "realtek,in2-differential");
- rt5677->pdata.lout1_diff = device_property_read_bool(dev,
- "realtek,lout1-differential");
- rt5677->pdata.lout2_diff = device_property_read_bool(dev,
- "realtek,lout2-differential");
- rt5677->pdata.lout3_diff = device_property_read_bool(dev,
- "realtek,lout3-differential");
-
- device_property_read_u8_array(dev, "realtek,gpio-config",
- rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
-
- device_property_read_u32(dev, "realtek,jd1-gpio",
- &rt5677->pdata.jd1_gpio);
- device_property_read_u32(dev, "realtek,jd2-gpio",
- &rt5677->pdata.jd2_gpio);
- device_property_read_u32(dev, "realtek,jd3-gpio",
- &rt5677->pdata.jd3_gpio);
+ if (ACPI_HANDLE(dev)) {
+ u32 val;
+
+ if (!device_property_read_u32(dev, "DCLK", &val))
+ rt5677->pdata.dmic2_clk_pin = val;
+
+ rt5677->pdata.in1_diff = device_property_read_bool(dev, "IN1");
+ rt5677->pdata.in2_diff = device_property_read_bool(dev, "IN2");
+ rt5677->pdata.lout1_diff = device_property_read_bool(dev, "OUT1");
+ rt5677->pdata.lout2_diff = device_property_read_bool(dev, "OUT2");
+ rt5677->pdata.lout3_diff = device_property_read_bool(dev, "OUT3");
+
+ device_property_read_u32(dev, "JD1", &rt5677->pdata.jd1_gpio);
+ device_property_read_u32(dev, "JD2", &rt5677->pdata.jd2_gpio);
+ device_property_read_u32(dev, "JD3", &rt5677->pdata.jd3_gpio);
+ } else {
+ rt5677->pdata.in1_diff = device_property_read_bool(dev,
+ "realtek,in1-differential");
+ rt5677->pdata.in2_diff = device_property_read_bool(dev,
+ "realtek,in2-differential");
+ rt5677->pdata.lout1_diff = device_property_read_bool(dev,
+ "realtek,lout1-differential");
+ rt5677->pdata.lout2_diff = device_property_read_bool(dev,
+ "realtek,lout2-differential");
+ rt5677->pdata.lout3_diff = device_property_read_bool(dev,
+ "realtek,lout3-differential");
+
+ device_property_read_u8_array(dev, "realtek,gpio-config",
+ rt5677->pdata.gpio_config, RT5677_GPIO_NUM);
+
+ device_property_read_u32(dev, "realtek,jd1-gpio",
+ &rt5677->pdata.jd1_gpio);
+ device_property_read_u32(dev, "realtek,jd2-gpio",
+ &rt5677->pdata.jd2_gpio);
+ device_property_read_u32(dev, "realtek,jd3-gpio",
+ &rt5677->pdata.jd3_gpio);
+ }
}
static struct regmap_irq rt5677_irqs[] = {
@@ -5123,7 +5161,27 @@ static int rt5677_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt5677);
- rt5677->type = id->driver_data;
+ if (ACPI_HANDLE(&i2c->dev)) {
+ const struct acpi_device_id *acpi_id;
+
+ acpi_id = acpi_match_device(i2c->dev.driver->acpi_match_table,
+ &i2c->dev);
+ if (!acpi_id) {
+ dev_err(&i2c->dev, "No driver data\n");
+ return -EINVAL;
+ }
+ rt5677->type = acpi_id->driver_data;
+
+ ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&i2c->dev),
+ bdw_rt5677_gpios);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add driver gpios\n");
+ return ret;
+ }
+
+ } else if (id) {
+ rt5677->type = id->driver_data;
+ }
if (pdata)
rt5677->pdata = *pdata;
@@ -5238,9 +5296,18 @@ static int rt5677_i2c_remove(struct i2c_client *i2c)
return 0;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rt5677_acpi_id[] = {
+ { "RT5677CE", RT5677 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, rt5677_acpi_id);
+#endif
+
static struct i2c_driver rt5677_i2c_driver = {
.driver = {
.name = "rt5677",
+ .acpi_match_table = ACPI_PTR(rt5677_acpi_id),
},
.probe = rt5677_i2c_probe,
.remove = rt5677_i2c_remove,
--
2.9.3.728.g30b24b4.dirty