[PATCH v2 4/8] dt-bindings: i2c: add bindings for nxp,pca9541

[Peter Rosin]

Fill the gap for this pre-existing driver.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
 .../devicetree/bindings/i2c/nxp,pca9541.txt        | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nxp,pca9541.txt

diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
new file mode 100644
index 000000000000..0fbbc6970ec5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
@@ -0,0 +1,29 @@
+* NXP PCA9541 I2C bus master selector
+
+Required Properties:
+
+  - compatible: Must be "nxp,pca9541"
+
+  - reg: The I2C address of the device.
+
+  The following required properties are defined externally:
+
+  - I2C arbitration bus node. See i2c-arb.txt in this directory.
+
+
+Example:
+
+	i2c-arbitrator@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+	};
-- 
2.1.4