[PATCH] usb: dwc3: gadget: don't rely on jiffies while holding spinlock

[Nicolas Saenz Julienne]

__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on
jiffies in order to timeout while polling the USB core for a link state
update. In the case the wakeup failed, the timeout will never happen and
will also cause the cpu to stall until rcu_preempt kicks in.

This switches to a "decrement variable and wait" timeout scheme.

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@xxxxxxxxx>
---
 drivers/usb/dwc3/gadget.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8f8c215..d0c711f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1433,7 +1433,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)
 
 static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 {
-	unsigned long		timeout;
+	int			retries;
 
 	int			ret;
 	u32			reg;
@@ -1484,14 +1484,16 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	}
 
 	/* poll until Link State changes to ON */
-	timeout = jiffies + msecs_to_jiffies(100);
+	retries = 20000;
 
-	while (!time_after(jiffies, timeout)) {
+	while (retries--) {
 		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
 		/* in HS, means ON */
 		if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
 			break;
+
+		udelay(5);
 	}
 
 	if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
-- 
2.7.4