Re: [PATCH] libnvdimm: Fix nvdimm_probe error on NVDIMM-N
From: Dan Williams
Date: Mon Aug 15 2016 - 17:20:59 EST
On Mon, Aug 15, 2016 at 10:52 AM, Toshi Kani <toshi.kani@xxxxxxx> wrote:
> 'ndctl list --buses --dimms' does not list any NVDIMM-Ns since
> they are considered as idle. ndctl checks if any driver is
> attached to nmem device. nvdimm_probe() always fails in
> nvdimm_init_nsarea() since NVDIMM-Ns do not implement optinal
> ND_CMD_GET_CONFIG_DATA command.
>
> Change nvdimm_probe() to accept the case that the CONFIG_DATA
> command is not implemented for NVDIMM-Ns. The driver attaches
> without ndd, which keeps it no-op to the device.
>
> Reported-by: Brian Boylston <brian.boylston@xxxxxxx>
> Signed-off-by: Toshi Kani <toshi.kani@xxxxxxx>
> Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
> ---
> drivers/nvdimm/dimm.c | 10 ++++++++++
> drivers/nvdimm/dimm_devs.c | 27 ++++++++++++++++-----------
> drivers/nvdimm/nd.h | 1 +
> 3 files changed, 27 insertions(+), 11 deletions(-)
This fails the ndctl unit test suite, see below plus some other cleanups...
>
> diff --git a/drivers/nvdimm/dimm.c b/drivers/nvdimm/dimm.c
> index 71d12bb..07e09c2 100644
> --- a/drivers/nvdimm/dimm.c
> +++ b/drivers/nvdimm/dimm.c
> @@ -26,6 +26,13 @@ static int nvdimm_probe(struct device *dev)
> struct nvdimm_drvdata *ndd;
> int rc;
>
> + rc = nvdimm_check_config_data(dev);
> + if (rc == -ENOENT)
> + /* not required for non-aliased nvdimm, ex. NVDIMM-N */
> + return 0;
> + else
> + return rc;
> +
Change usage of ENOENT to ENOTTY throughout...
> ndd = kzalloc(sizeof(*ndd), GFP_KERNEL);
> if (!ndd)
> return -ENOMEM;
> @@ -72,6 +79,9 @@ static int nvdimm_remove(struct device *dev)
> {
> struct nvdimm_drvdata *ndd = dev_get_drvdata(dev);
>
> + if (!ndd)
> + return 0;
> +
> nvdimm_bus_lock(dev);
> dev_set_drvdata(dev, NULL);
> nvdimm_bus_unlock(dev);
> diff --git a/drivers/nvdimm/dimm_devs.c b/drivers/nvdimm/dimm_devs.c
> index d9bba5e..fee82d3 100644
> --- a/drivers/nvdimm/dimm_devs.c
> +++ b/drivers/nvdimm/dimm_devs.c
> @@ -28,28 +28,33 @@ static DEFINE_IDA(dimm_ida);
> * Retrieve bus and dimm handle and return if this bus supports
> * get_config_data commands
> */
> -static int __validate_dimm(struct nvdimm_drvdata *ndd)
> +int nvdimm_check_config_data(struct device *dev)
> {
> - struct nvdimm *nvdimm;
> -
> - if (!ndd)
> - return -EINVAL;
> -
> - nvdimm = to_nvdimm(ndd->dev);
> + struct nvdimm *nvdimm = to_nvdimm(dev);
>
> if (!nvdimm->cmd_mask)
> - return -ENXIO;
> + goto err;
> if (!test_bit(ND_CMD_GET_CONFIG_DATA, &nvdimm->cmd_mask))
> - return -ENXIO;
> + goto err;
>
> return 0;
> +
> + err:
> + if (nvdimm->flags & NDD_ALIASING)
> + return -ENXIO;
> + else
> + return -ENOENT;
Let's not use "goto" since there is nothing to unwind.
> }
>
> static int validate_dimm(struct nvdimm_drvdata *ndd)
> {
> - int rc = __validate_dimm(ndd);
> + int rc;
>
> - if (rc && ndd)
> + if (!ndd)
> + return -EINVAL;
Since we've called nvdimm_check_config_data() before allocating ndd it
will always be NULL causing DIMMs with label areas to fail init.
> +
> + rc = nvdimm_check_config_data(ndd->dev);
> + if (rc)
> dev_dbg(ndd->dev, "%pf: %s error: %d\n",
> __builtin_return_address(0), __func__, rc);
> return rc;
> diff --git a/drivers/nvdimm/nd.h b/drivers/nvdimm/nd.h
> index 8024a0e..38d6f03 100644
> --- a/drivers/nvdimm/nd.h
> +++ b/drivers/nvdimm/nd.h
> @@ -191,6 +191,7 @@ void nvdimm_exit(void);
> void nd_region_exit(void);
> struct nvdimm;
> struct nvdimm_drvdata *to_ndd(struct nd_mapping *nd_mapping);
> +int nvdimm_check_config_data(struct device *dev);
> int nvdimm_init_nsarea(struct nvdimm_drvdata *ndd);
> int nvdimm_init_config_data(struct nvdimm_drvdata *ndd);
> int nvdimm_set_config_data(struct nvdimm_drvdata *ndd, size_t offset,