[PATCH] phy, leds: add support for led triggers on phy link state change
From: Zach Brown
Date: Wed Aug 17 2016 - 10:16:23 EST
From: Josh Cartwright <josh.cartwright@xxxxxx>
This introduces an option CONFIG_LED_TRIGGER_PHY (default n), which will
create a set of led triggers for each instantiated PHY device. There is
one LED trigger per link-speed, per-phy.
This allows for a user to configure their system to allow a set of LEDs
to represent link state changes on the phy.
Signed-off-by: Josh Cartwright <josh.cartwright@xxxxxx>
Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
Signed-off-by: Zach Brown <zach.brown@xxxxxx>
---
drivers/net/phy/Kconfig | 12 +++++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/phy.c | 8 +++
drivers/net/phy/phy_device.c | 4 ++
drivers/net/phy/phy_led_triggers.c | 107 +++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 9 ++++
include/linux/phy_led_triggers.h | 42 +++++++++++++++
7 files changed, 183 insertions(+)
create mode 100644 drivers/net/phy/phy_led_triggers.c
create mode 100644 include/linux/phy_led_triggers.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index d66133bf..ebab7cc 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -169,6 +169,18 @@ config FIXED_PHY
Currently tested with mpc866ads and mpc8349e-mitx.
+config LED_TRIGGER_PHY
+ bool "Support LED triggers for tracking link state"
+ depends on LEDS_TRIGGERS
+ ---help---
+ Adds support for a set of LED trigger events per-PHY. Link
+ state change will trigger the events, for consumption by an
+ LED class driver. There are triggers for each link speed,
+ and are of the form:
+ <mii bus id>:<phy>:<speed>
+
+ Where speed is one of: 10Mb, 100Mb, Gb, 2.5Gb, or 10GbE.
+
config MDIO_BITBANG
tristate "Support for bitbanged MDIO buses"
help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 73d65ce..0d69da7 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
+obj-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c5dc2c36..1baaf0f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -934,6 +934,7 @@ void phy_state_machine(struct work_struct *work)
phydev->state = PHY_NOLINK;
netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
break;
}
@@ -947,6 +948,7 @@ void phy_state_machine(struct work_struct *work)
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
} else if (0 == phydev->link_timeout--)
needs_aneg = true;
@@ -974,6 +976,7 @@ void phy_state_machine(struct work_struct *work)
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
}
break;
case PHY_FORCING:
@@ -990,6 +993,7 @@ void phy_state_machine(struct work_struct *work)
}
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
break;
case PHY_RUNNING:
/* Only register a CHANGE if we are polling and link changed
@@ -1019,6 +1023,7 @@ void phy_state_machine(struct work_struct *work)
}
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
if (phy_interrupt_is_valid(phydev))
err = phy_config_interrupt(phydev,
@@ -1029,6 +1034,7 @@ void phy_state_machine(struct work_struct *work)
phydev->link = 0;
netif_carrier_off(phydev->attached_dev);
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
do_suspend = true;
}
break;
@@ -1053,6 +1059,7 @@ void phy_state_machine(struct work_struct *work)
phydev->state = PHY_NOLINK;
}
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
} else {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
@@ -1069,6 +1076,7 @@ void phy_state_machine(struct work_struct *work)
phydev->state = PHY_NOLINK;
}
phydev->adjust_link(phydev->attached_dev);
+ phy_led_trigger_change_speed(phydev);
}
break;
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e977ba9..4671c13 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -30,6 +30,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/phy_led_triggers.h>
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>
@@ -57,6 +58,7 @@ static void phy_mdio_device_free(struct mdio_device *mdiodev)
static void phy_device_release(struct device *dev)
{
+ phy_led_triggers_unregister(to_phy_device(dev));
kfree(to_phy_device(dev));
}
@@ -345,6 +347,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
dev->state = PHY_DOWN;
+ phy_led_triggers_register(dev);
+
mutex_init(&dev->lock);
INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
INIT_WORK(&dev->phy_queue, phy_change);
diff --git a/drivers/net/phy/phy_led_triggers.c b/drivers/net/phy/phy_led_triggers.c
new file mode 100644
index 0000000..acbb7a9
--- /dev/null
+++ b/drivers/net/phy/phy_led_triggers.c
@@ -0,0 +1,107 @@
+/* Copyright (C) 2012 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/leds.h>
+#include <linux/phy.h>
+
+void phy_led_trigger_change_speed(struct phy_device *phy)
+{
+ struct phy_led_trigger *plt;
+
+ if (!phy->link) {
+ if (phy->last_triggered) {
+ led_trigger_event(&phy->last_triggered->trigger,
+ LED_OFF);
+ phy->last_triggered = NULL;
+ return;
+ }
+ return;
+ }
+
+ switch (phy->speed) {
+ case SPEED_10:
+ plt = &phy->phy_led_trigger[0];
+ break;
+ case SPEED_100:
+ plt = &phy->phy_led_trigger[1];
+ break;
+ case SPEED_1000:
+ plt = &phy->phy_led_trigger[2];
+ break;
+ case SPEED_2500:
+ plt = &phy->phy_led_trigger[3];
+ break;
+ case SPEED_10000:
+ plt = &phy->phy_led_trigger[4];
+ break;
+ default:
+ plt = NULL;
+ break;
+ }
+
+ if (plt != phy->last_triggered) {
+ led_trigger_event(&phy->last_triggered->trigger, LED_OFF);
+ led_trigger_event(&plt->trigger, LED_FULL);
+ phy->last_triggered = plt;
+ }
+}
+
+static int phy_led_trigger_register(struct phy_device *phy,
+ struct phy_led_trigger *plt, int i)
+{
+ static const char * const name_suffix[] = {
+ "10Mb",
+ "100Mb",
+ "Gb",
+ "2.5Gb",
+ "10GbE",
+ };
+ snprintf(plt->name, sizeof(plt->name), PHY_ID_FMT ":%s",
+ phy->mdio.bus->id, phy->mdio.addr, name_suffix[i]);
+ plt->trigger.name = plt->name;
+ return led_trigger_register(&plt->trigger);
+}
+
+static void phy_led_trigger_unregister(struct phy_led_trigger *plt)
+{
+ led_trigger_unregister(&plt->trigger);
+}
+
+int phy_led_triggers_register(struct phy_device *phy)
+{
+ int i, err;
+
+ for (i = 0; i < ARRAY_SIZE(phy->phy_led_trigger); i++) {
+ err = phy_led_trigger_register(phy, &phy->phy_led_trigger[i],
+ i);
+ if (err)
+ goto out_unreg;
+ }
+
+ phy->last_triggered = NULL;
+ phy_led_trigger_change_speed(phy);
+
+ return 0;
+
+out_unreg:
+ while (i--)
+ phy_led_trigger_unregister(&phy->phy_led_trigger[i]);
+ return err;
+}
+
+void phy_led_triggers_unregister(struct phy_device *phy)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(phy->phy_led_trigger); i++)
+ phy_led_trigger_unregister(&phy->phy_led_trigger[i]);
+}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2d24b28..315dd06 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -25,6 +25,7 @@
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/mod_devicetable.h>
+#include <linux/phy_led_triggers.h>
#include <linux/atomic.h>
@@ -402,6 +403,14 @@ struct phy_device {
int link_timeout;
+#ifdef CONFIG_LED_TRIGGER_PHY
+ /*
+ * A led_trigger per SPEED_*
+ */
+ struct phy_led_trigger phy_led_trigger[5];
+ struct phy_led_trigger *last_triggered;
+#endif
+
/*
* Interrupt number for this PHY
* -1 means no interrupt
diff --git a/include/linux/phy_led_triggers.h b/include/linux/phy_led_triggers.h
new file mode 100644
index 0000000..8f27d99
--- /dev/null
+++ b/include/linux/phy_led_triggers.h
@@ -0,0 +1,42 @@
+/* Copyright (C) 2012 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PHY_LED_TRIGGERS
+#define __PHY_LED_TRIGGERS
+
+struct phy_device;
+
+#ifdef CONFIG_LED_TRIGGER_PHY
+
+#include <linux/leds.h>
+
+struct phy_led_trigger {
+ struct led_trigger trigger;
+ char name[64];
+};
+
+extern int phy_led_triggers_register(struct phy_device *phy);
+extern void phy_led_triggers_unregister(struct phy_device *phy);
+extern void phy_led_trigger_change_speed(struct phy_device *phy);
+
+#else
+
+static inline int phy_led_triggers_register(struct phy_device *phy)
+{
+ return 0;
+}
+static inline void phy_led_triggers_unregister(struct phy_device *phy) { }
+static inline void phy_led_trigger_change_speed(struct phy_device *phy) { }
+
+#endif
+
+#endif
--
2.7.4