[PACTH v4] mmc: sdhci: Do not allow tuning procedure to be interrupted

[robert . foss]

From: Christopher Freeman <cfreeman@xxxxxxxxxx>

wait_event_interruptible_timeout() will return early if the blocked
process receives a signal, causing the driver to abort the tuning
procedure and possibly leaving the controller in a bad state.  Since the
tuning command is expected to complete quickly (<50ms) and we've set a
timeout, use wait_event_timeout() instead.

Signed-off-by: Christopher Freeman <cfreeman@xxxxxxxxxx>
Tested-by: Robert Foss <robert.foss@xxxxxxxxxxxxx>
Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxxxxx>
Reviewed-by: Benson Leung <bleung@xxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---

Changes since v1:
- Added proper metadata tags to series.

Changes since v2:
- Added "Reviewed-by: Benson Leung <bleung@xxxxxxxxxxxx>"

Changes since v3:
- Added "Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>"

 drivers/mmc/host/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0e3d7c0..9e80203 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1960,7 +1960,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 		spin_unlock_irqrestore(&host->lock, flags);
 		/* Wait for Buffer Read Ready interrupt */
-		wait_event_interruptible_timeout(host->buf_ready_int,
+		wait_event_timeout(host->buf_ready_int,
 					(host->tuning_done == 1),
 					msecs_to_jiffies(50));
 		spin_lock_irqsave(&host->lock, flags);
-- 
2.7.4