Re: [PATCH 8/9] MIPS: xilfpga: Add DT node for AXI emaclite

From: Zubair Lutfullah Kakakhel
Date: Thu Aug 18 2016 - 06:17:37 EST


Hi,

On 08/15/2016 04:17 PM, Jason Cooper wrote:
Hi Zubair,

On Mon, Aug 15, 2016 at 02:55:34PM +0100, Zubair Lutfullah Kakakhel wrote:
The xilfpga platform has a Xilinx AXI emaclite block.

Add the DT node to use it.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
---
arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
index 3658e21..58bc62f 100644
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -42,6 +42,33 @@
xlnx,tri-default = <0xffffffff>;
} ;

+ axi_ethernetlite: ethernet@10e00000 {
+ compatible = "xlnx,xps-ethernetlite-3.00.a";

This one also isn't documented.

These are sort of documented. Although checkpatch probably won't find them.

Xilinx IP blocks follow a generic DT style as documented here.

http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/xilinx.txt


+ device_type = "network";
+ interrupt-parent = <&axi_intc>;
+ interrupts = <1>;
+ local-mac-address = [08 86 4C 0D F7 09];

I'm pretty sure you don't want this in the mainline dts file.

Oops. Sorry. I'll remove it.

Thanks
ZubairLK


thx,

Jason.

+ phy-handle = <&phy0>;
+ reg = <0x10e00000 0x10000>;
+ xlnx,duplex = <0x1>;
+ xlnx,include-global-buffers = <0x1>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,instance = "axi_ethernetlite_inst";
+ xlnx,rx-ping-pong = <0x1>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,tx-ping-pong = <0x1>;
+ xlnx,use-internal = <0x0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
+
axi_uart16550: serial@10400000 {
compatible = "ns16550a";
reg = <0x10400000 0x10000>;
--
1.9.1