RE: [PATCH 08/14] rpmsg: Split rpmsg core and virtio backend

[Loic PALLARDY]

> -----Original Message-----
> From: linux-remoteproc-owner@xxxxxxxxxxxxxxx [mailto:linux-remoteproc-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Bjorn Andersson
> Sent: Tuesday, August 16, 2016 2:17 AM
> To: Ohad Ben-Cohen <ohad@xxxxxxxxxx>; Bjorn Andersson
> <bjorn.andersson@xxxxxxxxxx>
> Cc: linux-remoteproc@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> Sricharan R <sricharan@xxxxxxxxxxxxxx>
> Subject: [PATCH 08/14] rpmsg: Split rpmsg core and virtio backend
> 
> Extract the generic rpmsg core functionality from the virtio rpmsg
> implementation, splitting the implementation in a rpmsg core and a
> virtio backend.
> 
> Based on initial work by Sricharan R <sricharan@xxxxxxxxxxxxxx>
> 
> Cc: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  drivers/rpmsg/Kconfig            |   4 +
>  drivers/rpmsg/Makefile           |   3 +-
>  drivers/rpmsg/rpmsg_core.c       | 513
> +++++++++++++++++++++++++++++++++++++++
>  drivers/rpmsg/rpmsg_internal.h   |  45 ++++
>  drivers/rpmsg/virtio_rpmsg_bus.c | 477 +-----------------------------------
Hi Bjorn,

Could you please regenerate the patch with  option -M (of git formatpatch) to detect file renames.
It will provide better visibility of differences between virtio_rpmsg_bus.c and rpmsg_core.c.

>  5 files changed, 569 insertions(+), 473 deletions(-)
>  create mode 100644 drivers/rpmsg/rpmsg_core.c
>  create mode 100644 drivers/rpmsg/rpmsg_internal.h
> 
> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
> index 69a219387582..40614be88c97 100644
> --- a/drivers/rpmsg/Kconfig
> +++ b/drivers/rpmsg/Kconfig
> @@ -3,6 +3,10 @@ menu "Rpmsg drivers"
>  # RPMSG always gets selected by whoever wants it
>  config RPMSG
>  	tristate
> +
> +config RPMSG_VIRTIO
> +	tristate
> +	select RPMSG
>  	select VIRTIO
>  	select VIRTUALIZATION
> 
Remoteproc Kconfig should be changed too to select RPMSG_VIRTIO instead of RPMSG.

Regards,
Loic

> diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
> index 7617fcb8259f..383213417a00 100644
> --- a/drivers/rpmsg/Makefile
> +++ b/drivers/rpmsg/Makefile
> @@ -1 +1,2 @@
> -obj-$(CONFIG_RPMSG)	+= virtio_rpmsg_bus.o
> +obj-$(CONFIG_RPMSG)	+= rpmsg_core.o
> +obj-$(CONFIG_RPMSG_VIRTIO) += virtio_rpmsg_bus.o
> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
> new file mode 100644
> index 000000000000..73bbc5ea5778
> --- /dev/null
> +++ b/drivers/rpmsg/rpmsg_core.c
> @@ -0,0 +1,513 @@
> +/*
> + * Virtio-based remote processor messaging bus
> + *
> + * Copyright (C) 2011 Texas Instruments, Inc.
> + * Copyright (C) 2011 Google, Inc.
> + *
> + * Ohad Ben-Cohen <ohad@xxxxxxxxxx>
> + * Brian Swetland <swetland@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/virtio.h>
> +#include <linux/virtio_ids.h>
> +#include <linux/virtio_config.h>
> +#include <linux/scatterlist.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/slab.h>
> +#include <linux/idr.h>
> +#include <linux/jiffies.h>
> +#include <linux/sched.h>
> +#include <linux/wait.h>
> +#include <linux/rpmsg.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +
> +#include "rpmsg_internal.h"
> +
> +/**
> + * rpmsg_create_ept() - create a new rpmsg_endpoint
> + * @rpdev: rpmsg channel device
> + * @cb: rx callback handler
> + * @priv: private data for the driver's use
> + * @addr: local rpmsg address to bind with @cb
> + *
> + * Every rpmsg address in the system is bound to an rx callback (so when
> + * inbound messages arrive, they are dispatched by the rpmsg bus using the
> + * appropriate callback handler) by means of an rpmsg_endpoint struct.
> + *
> + * This function allows drivers to create such an endpoint, and by that,
> + * bind a callback, and possibly some private data too, to an rpmsg address
> + * (either one that is known in advance, or one that will be dynamically
> + * assigned for them).
> + *
> + * Simple rpmsg drivers need not call rpmsg_create_ept, because an
> endpoint
> + * is already created for them when they are probed by the rpmsg bus
> + * (using the rx callback provided when they registered to the rpmsg bus).
> + *
> + * So things should just work for simple drivers: they already have an
> + * endpoint, their rx callback is bound to their rpmsg address, and when
> + * relevant inbound messages arrive (i.e. messages which their dst address
> + * equals to the src address of their rpmsg channel), the driver's handler
> + * is invoked to process it.
> + *
> + * That said, more complicated drivers might do need to allocate
> + * additional rpmsg addresses, and bind them to different rx callbacks.
> + * To accomplish that, those drivers need to call this function.
> + *
> + * Drivers should provide their @rpdev channel (so the new endpoint would
> belong
> + * to the same remote processor their channel belongs to), an rx callback
> + * function, an optional private data (which is provided back when the
> + * rx callback is invoked), and an address they want to bind with the
> + * callback. If @addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
> + * dynamically assign them an available rpmsg address (drivers should have
> + * a very good reason why not to always use RPMSG_ADDR_ANY here).
> + *
> + * Returns a pointer to the endpoint on success, or NULL on error.
> + */
> +struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *rpdev,
> +				rpmsg_rx_cb_t cb, void *priv, u32 addr)
> +{
> +	return rpdev->create_ept(rpdev, cb, priv, addr);
> +}
> +EXPORT_SYMBOL(rpmsg_create_ept);
> +
> +/**
> + * rpmsg_destroy_ept() - destroy an existing rpmsg endpoint
> + * @ept: endpoing to destroy
> + *
> + * Should be used by drivers to destroy an rpmsg endpoint previously
> + * created with rpmsg_create_ept().
> + */
> +void rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
> +{
> +	ept->rpdev->destroy_ept(ept);
> +}
> +EXPORT_SYMBOL(rpmsg_destroy_ept);
> +
> +/**
> + * rpmsg_send() - send a message across to the remote processor
> + * @ept: the rpmsg endpoint
> + * @data: payload of message
> + * @len: length of payload
> + *
> + * This function sends @data of length @len on the @ept endpoint.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address and its associated rpmsg
> + * device destination addresses.
> + * In case there are no TX buffers available, the function will block until
> + * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> + * happens, -ERESTARTSYS is returned.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->send(ept, data, len);
> +}
> +
> +/**
> + * rpmsg_sendto() - send a message across to the remote processor,
> specify dst
> + * @ept: the rpmsg endpoint
> + * @data: payload of message
> + * @len: length of payload
> + * @dst: destination address
> + *
> + * This function sends @data of length @len to the remote @dst address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address as source.
> + * In case there are no TX buffers available, the function will block until
> + * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> + * happens, -ERESTARTSYS is returned.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->sendto(ept, data, len, dst);
> +}
> +EXPORT_SYMBOL(rpmsg_sendto);
> +
> +/**
> + * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
> + * @ept: the rpmsg endpoint
> + * @src: source address
> + * @dst: destination address
> + * @data: payload of message
> + * @len: length of payload
> + *
> + * This function sends @data of length @len to the remote @dst address,
> + * and uses @src as the source address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to.
> + * In case there are no TX buffers available, the function will block until
> + * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> + * happens, -ERESTARTSYS is returned.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
> +			  void *data, int len)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->send_offchannel(ept, src, dst, data, len);
> +}
> +EXPORT_SYMBOL(rpmsg_send_offchannel);
> +
> +/**
> + * rpmsg_send() - send a message across to the remote processor
> + * @ept: the rpmsg endpoint
> + * @data: payload of message
> + * @len: length of payload
> + *
> + * This function sends @data of length @len on the @ept endpoint.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address as source and its associated
> + * rpdev's address as destination.
> + * In case there are no TX buffers available, the function will immediately
> + * return -ENOMEM without waiting until one becomes available.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->trysend(ept, data, len);
> +}
> +EXPORT_SYMBOL(rpmsg_trysend);
> +
> +/**
> + * rpmsg_sendto() - send a message across to the remote processor,
> specify dst
> + * @ept: the rpmsg endpoint
> + * @data: payload of message
> + * @len: length of payload
> + * @dst: destination address
> + *
> + * This function sends @data of length @len to the remote @dst address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address as source.
> + * In case there are no TX buffers available, the function will immediately
> + * return -ENOMEM without waiting until one becomes available.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32
> dst)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->trysendto(ept, data, len, dst);
> +}
> +EXPORT_SYMBOL(rpmsg_trysendto);
> +
> +/**
> + * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
> + * @ept: the rpmsg endpoint
> + * @src: source address
> + * @dst: destination address
> + * @data: payload of message
> + * @len: length of payload
> + *
> + * This function sends @data of length @len to the remote @dst address,
> + * and uses @src as the source address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to.
> + * In case there are no TX buffers available, the function will immediately
> + * return -ENOMEM without waiting until one becomes available.
> + *
> + * Can only be called from process context (for now).
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32
> dst,
> +			     void *data, int len)
> +{
> +	struct rpmsg_device *rpdev = ept->rpdev;
> +
> +	return rpdev->trysend_offchannel(ept, src, dst, data, len);
> +}
> +EXPORT_SYMBOL(rpmsg_trysend_offchannel);
> +
> +/* sysfs show configuration fields */
> +#define rpmsg_show_attr(field, path, format_string)			\
> +static ssize_t								\
> +field##_show(struct device *dev,					\
> +			struct device_attribute *attr, char *buf)	\
> +{									\
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);		\
> +									\
> +	return sprintf(buf, format_string, rpdev->path);		\
> +}
> +
> +/* for more info, see Documentation/ABI/testing/sysfs-bus-rpmsg */
> +rpmsg_show_attr(name, id.name, "%s\n");
> +rpmsg_show_attr(src, src, "0x%x\n");
> +rpmsg_show_attr(dst, dst, "0x%x\n");
> +rpmsg_show_attr(announce, announce ? "true" : "false", "%s\n");
> +
> +static ssize_t modalias_show(struct device *dev,
> +			     struct device_attribute *attr, char *buf)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +
> +	return sprintf(buf, RPMSG_DEVICE_MODALIAS_FMT "\n", rpdev-
> >id.name);
> +}
> +
> +static struct device_attribute rpmsg_dev_attrs[] = {
> +	__ATTR_RO(name),
> +	__ATTR_RO(modalias),
> +	__ATTR_RO(dst),
> +	__ATTR_RO(src),
> +	__ATTR_RO(announce),
> +	__ATTR_NULL
> +};
> +
> +/* rpmsg devices and drivers are matched using the service name */
> +static inline int rpmsg_id_match(const struct rpmsg_device *rpdev,
> +				  const struct rpmsg_device_id *id)
> +{
> +	return strncmp(id->name, rpdev->id.name, RPMSG_NAME_SIZE) ==
> 0;
> +}
> +
> +/* match rpmsg channel and rpmsg driver */
> +static int rpmsg_dev_match(struct device *dev, struct device_driver *drv)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +	struct rpmsg_driver *rpdrv = to_rpmsg_driver(drv);
> +	const struct rpmsg_device_id *ids = rpdrv->id_table;
> +	unsigned int i;
> +
> +	if (ids)
> +		for (i = 0; ids[i].name[0]; i++)
> +			if (rpmsg_id_match(rpdev, &ids[i]))
> +				return 1;
> +
> +	return of_driver_match_device(dev, drv);
> +}
> +
> +static int rpmsg_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +
> +	return add_uevent_var(env, "MODALIAS="
> RPMSG_DEVICE_MODALIAS_FMT,
> +					rpdev->id.name);
> +}
> +
> +/*
> + * when an rpmsg driver is probed with a channel, we seamlessly create
> + * it an endpoint, binding its rx callback to a unique local rpmsg
> + * address.
> + *
> + * if we need to, we also announce about this channel to the remote
> + * processor (needed in case the driver is exposing an rpmsg service).
> + */
> +static int rpmsg_dev_probe(struct device *dev)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +	struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
> +	struct rpmsg_endpoint *ept;
> +	int err;
> +
> +	ept = rpmsg_create_ept(rpdev, rpdrv->callback, NULL, rpdev->src);
> +	if (!ept) {
> +		dev_err(dev, "failed to create endpoint\n");
> +		err = -ENOMEM;
> +		goto out;
> +	}
> +
> +	rpdev->ept = ept;
> +	rpdev->src = ept->addr;
> +
> +	err = rpdrv->probe(rpdev);
> +	if (err) {
> +		dev_err(dev, "%s: failed: %d\n", __func__, err);
> +		rpmsg_destroy_ept(ept);
> +		goto out;
> +	}
> +
> +	if (rpdev->announce_create)
> +		err = rpdev->announce_create(rpdev);
> +out:
> +	return err;
> +}
> +
> +static int rpmsg_dev_remove(struct device *dev)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +	struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
> +	int err = 0;
> +
> +	if (rpdev->announce_destroy)
> +		err = rpdev->announce_destroy(rpdev);
> +
> +	rpdrv->remove(rpdev);
> +
> +	rpmsg_destroy_ept(rpdev->ept);
> +
> +	return err;
> +}
> +
> +static struct bus_type rpmsg_bus = {
> +	.name		= "rpmsg",
> +	.match		= rpmsg_dev_match,
> +	.dev_attrs	= rpmsg_dev_attrs,
> +	.uevent		= rpmsg_uevent,
> +	.probe		= rpmsg_dev_probe,
> +	.remove		= rpmsg_dev_remove,
> +};
> +
> +static void rpmsg_release_device(struct device *dev)
> +{
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +
> +	kfree(rpdev);
> +}
> +
> +int rpmsg_register_device(struct rpmsg_device *rpdev)
> +{
> +	struct device *dev = &rpdev->dev;
> +	int ret;
> +
> +	dev_set_name(&rpdev->dev, "%s:%s",
> +		     dev_name(dev->parent), rpdev->id.name);
> +
> +	rpdev->dev.bus = &rpmsg_bus;
> +	rpdev->dev.release = rpmsg_release_device;
> +
> +	ret = device_register(&rpdev->dev);
> +	if (ret) {
> +		dev_err(dev, "device_register failed: %d\n", ret);
> +		put_device(&rpdev->dev);
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(rpmsg_register_device);
> +
> +/*
> + * match an rpmsg channel with a channel info struct.
> + * this is used to make sure we're not creating rpmsg devices for channels
> + * that already exist.
> + */
> +static int rpmsg_channel_match(struct device *dev, void *data)
> +{
> +	struct rpmsg_channel_info *chinfo = data;
> +	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> +
> +	if (chinfo->src != RPMSG_ADDR_ANY && chinfo->src != rpdev->src)
> +		return 0;
> +
> +	if (chinfo->dst != RPMSG_ADDR_ANY && chinfo->dst != rpdev->dst)
> +		return 0;
> +
> +	if (strncmp(chinfo->name, rpdev->id.name, RPMSG_NAME_SIZE))
> +		return 0;
> +
> +	/* found a match ! */
> +	return 1;
> +}
> +
> +struct device *rpmsg_find_device(struct device *parent,
> +				 struct rpmsg_channel_info *chinfo)
> +{
> +	return device_find_child(parent, chinfo, rpmsg_channel_match);
> +
> +}
> +EXPORT_SYMBOL(rpmsg_find_device);
> +
> +/*
> + * find an existing channel using its name + address properties,
> + * and destroy it
> + */
> +int rpmsg_unregister_device(struct device *parent,
> +			    struct rpmsg_channel_info *chinfo)
> +{
> +	struct device *dev;
> +
> +	dev = rpmsg_find_device(parent, chinfo);
> +	if (!dev)
> +		return -EINVAL;
> +
> +	device_unregister(dev);
> +
> +	put_device(dev);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rpmsg_unregister_device);
> +
> +/**
> + * __register_rpmsg_driver() - register an rpmsg driver with the rpmsg bus
> + * @rpdrv: pointer to a struct rpmsg_driver
> + * @owner: owning module/driver
> + *
> + * Returns 0 on success, and an appropriate error value on failure.
> + */
> +int __register_rpmsg_driver(struct rpmsg_driver *rpdrv, struct module
> *owner)
> +{
> +	rpdrv->drv.bus = &rpmsg_bus;
> +	rpdrv->drv.owner = owner;
> +	return driver_register(&rpdrv->drv);
> +}
> +EXPORT_SYMBOL(__register_rpmsg_driver);
> +
> +/**
> + * unregister_rpmsg_driver() - unregister an rpmsg driver from the rpmsg
> bus
> + * @rpdrv: pointer to a struct rpmsg_driver
> + *
> + * Returns 0 on success, and an appropriate error value on failure.
> + */
> +void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv)
> +{
> +	driver_unregister(&rpdrv->drv);
> +}
> +EXPORT_SYMBOL(unregister_rpmsg_driver);
> +
> +
> +static int __init rpmsg_init(void)
> +{
> +	int ret;
> +
> +	ret = bus_register(&rpmsg_bus);
> +	if (ret)
> +		pr_err("failed to register rpmsg bus: %d\n", ret);
> +
> +	return ret;
> +}
> +postcore_initcall(rpmsg_init);
> +
> +static void __exit rpmsg_fini(void)
> +{
> +	bus_unregister(&rpmsg_bus);
> +}
> +module_exit(rpmsg_fini);
> +
> +MODULE_DESCRIPTION("remote processor messaging bus");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/rpmsg/rpmsg_internal.h
> b/drivers/rpmsg/rpmsg_internal.h
> new file mode 100644
> index 000000000000..fa91075c7956
> --- /dev/null
> +++ b/drivers/rpmsg/rpmsg_internal.h
> @@ -0,0 +1,45 @@
> +/*
> + * Virtio-based remote processor messaging bus
> + *
> + * Copyright (C) 2011 Texas Instruments, Inc.
> + * Copyright (C) 2011 Google, Inc.
> + *
> + * Ohad Ben-Cohen <ohad@xxxxxxxxxx>
> + * Brian Swetland <swetland@xxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __RPMSG_INTERNAL_H__
> +#define __RPMSG_INTERNAL_H__
> +
> +#define to_rpmsg_device(d) container_of(d, struct rpmsg_device, dev)
> +#define to_rpmsg_driver(d) container_of(d, struct rpmsg_driver, drv)
> +
> +/**
> + * struct rpmsg_channel_info - internal channel info representation
> + * @name: name of service
> + * @src: local address
> + * @dst: destination address
> + */
> +struct rpmsg_channel_info {
> +	char name[RPMSG_NAME_SIZE];
> +	u32 src;
> +	u32 dst;
> +};
> +
> +int rpmsg_register_device(struct rpmsg_device *rpdev);
> +int rpmsg_unregister_device(struct device *parent,
> +			    struct rpmsg_channel_info *chinfo);
> +
> +struct device *rpmsg_find_device(struct device *parent,
> +				 struct rpmsg_channel_info *chinfo);
> +
> +#endif
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c
> b/drivers/rpmsg/virtio_rpmsg_bus.c
> index 5cadb75a225d..779c54304774 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -35,6 +35,8 @@
>  #include <linux/mutex.h>
>  #include <linux/of_device.h>
> 
> +#include "rpmsg_internal.h"
> +
>  /**
>   * struct virtproc_info - virtual remote processor state
>   * @vdev:	the virtio device
> @@ -73,21 +75,6 @@ struct virtproc_info {
>  	struct rpmsg_endpoint *ns_ept;
>  };
> 
> -/**
> - * struct rpmsg_channel_info - internal channel info representation
> - * @name: name of service
> - * @src: local address
> - * @dst: destination address
> - */
> -struct rpmsg_channel_info {
> -	char name[RPMSG_NAME_SIZE];
> -	u32 src;
> -	u32 dst;
> -};
> -
> -#define to_rpmsg_device(d) container_of(d, struct rpmsg_device, dev)
> -#define to_rpmsg_driver(d) container_of(d, struct rpmsg_driver, drv)
> -
>  /*
>   * We're allocating buffers of 512 bytes each for communications. The
>   * number of buffers will be computed from the number of buffers
> supported
> @@ -129,72 +116,6 @@ static int virtio_rpmsg_trysendto(struct
> rpmsg_endpoint *ept, void *data,
>  				  int len, u32 dst);
>  static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32
> src,
>  					   u32 dst, void *data, int len);
> -static int rpmsg_register_device(struct rpmsg_device *rpdev);
> -
> -/* sysfs show configuration fields */
> -#define rpmsg_show_attr(field, path, format_string)			\
> -static ssize_t								\
> -field##_show(struct device *dev,					\
> -			struct device_attribute *attr, char *buf)	\
> -{									\
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);		\
> -									\
> -	return sprintf(buf, format_string, rpdev->path);		\
> -}
> -
> -/* for more info, see Documentation/ABI/testing/sysfs-bus-rpmsg */
> -rpmsg_show_attr(name, id.name, "%s\n");
> -rpmsg_show_attr(src, src, "0x%x\n");
> -rpmsg_show_attr(dst, dst, "0x%x\n");
> -rpmsg_show_attr(announce, announce ? "true" : "false", "%s\n");
> -
> -static ssize_t modalias_show(struct device *dev,
> -			     struct device_attribute *attr, char *buf)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -
> -	return sprintf(buf, RPMSG_DEVICE_MODALIAS_FMT "\n", rpdev-
> >id.name);
> -}
> -
> -static struct device_attribute rpmsg_dev_attrs[] = {
> -	__ATTR_RO(name),
> -	__ATTR_RO(modalias),
> -	__ATTR_RO(dst),
> -	__ATTR_RO(src),
> -	__ATTR_RO(announce),
> -	__ATTR_NULL
> -};
> -
> -/* rpmsg devices and drivers are matched using the service name */
> -static inline int rpmsg_id_match(const struct rpmsg_device *rpdev,
> -				 const struct rpmsg_device_id *id)
> -{
> -	return strncmp(id->name, rpdev->id.name, RPMSG_NAME_SIZE) ==
> 0;
> -}
> -
> -/* match rpmsg channel and rpmsg driver */
> -static int rpmsg_dev_match(struct device *dev, struct device_driver *drv)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -	struct rpmsg_driver *rpdrv = to_rpmsg_driver(drv);
> -	const struct rpmsg_device_id *ids = rpdrv->id_table;
> -	unsigned int i;
> -
> -	if (ids)
> -		for (i = 0; ids[i].name[0]; i++)
> -			if (rpmsg_id_match(rpdev, &ids[i]))
> -				return 1;
> -
> -	return of_driver_match_device(dev, drv);
> -}
> -
> -static int rpmsg_uevent(struct device *dev, struct kobj_uevent_env *env)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -
> -	return add_uevent_var(env, "MODALIAS="
> RPMSG_DEVICE_MODALIAS_FMT,
> -					rpdev->id.name);
> -}
> 
>  /**
>   * __ept_release() - deallocate an rpmsg endpoint
> @@ -266,53 +187,6 @@ free_ept:
>  	return NULL;
>  }
> 
> -/**
> - * rpmsg_create_ept() - create a new rpmsg_endpoint
> - * @rpdev: rpmsg channel device
> - * @cb: rx callback handler
> - * @priv: private data for the driver's use
> - * @addr: local rpmsg address to bind with @cb
> - *
> - * Every rpmsg address in the system is bound to an rx callback (so when
> - * inbound messages arrive, they are dispatched by the rpmsg bus using the
> - * appropriate callback handler) by means of an rpmsg_endpoint struct.
> - *
> - * This function allows drivers to create such an endpoint, and by that,
> - * bind a callback, and possibly some private data too, to an rpmsg address
> - * (either one that is known in advance, or one that will be dynamically
> - * assigned for them).
> - *
> - * Simple rpmsg drivers need not call rpmsg_create_ept, because an
> endpoint
> - * is already created for them when they are probed by the rpmsg bus
> - * (using the rx callback provided when they registered to the rpmsg bus).
> - *
> - * So things should just work for simple drivers: they already have an
> - * endpoint, their rx callback is bound to their rpmsg address, and when
> - * relevant inbound messages arrive (i.e. messages which their dst address
> - * equals to the src address of their rpmsg channel), the driver's handler
> - * is invoked to process it.
> - *
> - * That said, more complicated drivers might do need to allocate
> - * additional rpmsg addresses, and bind them to different rx callbacks.
> - * To accomplish that, those drivers need to call this function.
> - *
> - * Drivers should provide their @rpdev channel (so the new endpoint would
> belong
> - * to the same remote processor their channel belongs to), an rx callback
> - * function, an optional private data (which is provided back when the
> - * rx callback is invoked), and an address they want to bind with the
> - * callback. If @addr is RPMSG_ADDR_ANY, then rpmsg_create_ept will
> - * dynamically assign them an available rpmsg address (drivers should have
> - * a very good reason why not to always use RPMSG_ADDR_ANY here).
> - *
> - * Returns a pointer to the endpoint on success, or NULL on error.
> - */
> -struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *rpdev,
> -					rpmsg_rx_cb_t cb, void *priv, u32
> addr)
> -{
> -	return rpdev->create_ept(rpdev, cb, priv, addr);
> -}
> -EXPORT_SYMBOL(rpmsg_create_ept);
> -
>  static struct rpmsg_endpoint *virtio_rpmsg_create_ept(struct
> rpmsg_device *rpdev,
>  						      rpmsg_rx_cb_t cb,
>  						      void *priv, u32 addr)
> @@ -346,62 +220,11 @@ __rpmsg_destroy_ept(struct virtproc_info *vrp,
> struct rpmsg_endpoint *ept)
>  	kref_put(&ept->refcount, __ept_release);
>  }
> 
> -/**
> - * rpmsg_destroy_ept() - destroy an existing rpmsg endpoint
> - * @ept: endpoing to destroy
> - *
> - * Should be used by drivers to destroy an rpmsg endpoint previously
> - * created with rpmsg_create_ept().
> - */
> -void rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
> -{
> -	ept->rpdev->destroy_ept(ept);
> -}
> -EXPORT_SYMBOL(rpmsg_destroy_ept);
> -
>  static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
>  {
>  	__rpmsg_destroy_ept(ept->rpdev->vrp, ept);
>  }
> 
> -/*
> - * when an rpmsg driver is probed with a channel, we seamlessly create
> - * it an endpoint, binding its rx callback to a unique local rpmsg
> - * address.
> - *
> - * if we need to, we also announce about this channel to the remote
> - * processor (needed in case the driver is exposing an rpmsg service).
> - */
> -static int rpmsg_dev_probe(struct device *dev)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -	struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
> -	struct rpmsg_endpoint *ept;
> -	int err;
> -
> -	ept = rpmsg_create_ept(rpdev, rpdrv->callback, NULL, rpdev->src);
> -	if (!ept) {
> -		dev_err(dev, "failed to create endpoint\n");
> -		err = -ENOMEM;
> -		goto out;
> -	}
> -
> -	rpdev->ept = ept;
> -	rpdev->src = ept->addr;
> -
> -	err = rpdrv->probe(rpdev);
> -	if (err) {
> -		dev_err(dev, "%s: failed: %d\n", __func__, err);
> -		rpmsg_destroy_ept(ept);
> -		goto out;
> -	}
> -
> -	if (rpdev->announce_create)
> -		err = rpdev->announce_create(rpdev);
> -out:
> -	return err;
> -}
> -
>  static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
>  {
>  	struct virtproc_info *vrp = rpdev->vrp;
> @@ -448,88 +271,6 @@ static int virtio_rpmsg_announce_destroy(struct
> rpmsg_device *rpdev)
>  	return err;
>  }
> 
> -static int rpmsg_dev_remove(struct device *dev)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -	struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
> -	int err = 0;
> -
> -	if (rpdev->announce_destroy)
> -		err = rpdev->announce_destroy(rpdev);
> -
> -	rpdrv->remove(rpdev);
> -
> -	rpmsg_destroy_ept(rpdev->ept);
> -
> -	return err;
> -}
> -
> -static struct bus_type rpmsg_bus = {
> -	.name		= "rpmsg",
> -	.match		= rpmsg_dev_match,
> -	.dev_attrs	= rpmsg_dev_attrs,
> -	.uevent		= rpmsg_uevent,
> -	.probe		= rpmsg_dev_probe,
> -	.remove		= rpmsg_dev_remove,
> -};
> -
> -/**
> - * __register_rpmsg_driver() - register an rpmsg driver with the rpmsg bus
> - * @rpdrv: pointer to a struct rpmsg_driver
> - * @owner: owning module/driver
> - *
> - * Returns 0 on success, and an appropriate error value on failure.
> - */
> -int __register_rpmsg_driver(struct rpmsg_driver *rpdrv, struct module
> *owner)
> -{
> -	rpdrv->drv.bus = &rpmsg_bus;
> -	rpdrv->drv.owner = owner;
> -	return driver_register(&rpdrv->drv);
> -}
> -EXPORT_SYMBOL(__register_rpmsg_driver);
> -
> -/**
> - * unregister_rpmsg_driver() - unregister an rpmsg driver from the rpmsg
> bus
> - * @rpdrv: pointer to a struct rpmsg_driver
> - *
> - * Returns 0 on success, and an appropriate error value on failure.
> - */
> -void unregister_rpmsg_driver(struct rpmsg_driver *rpdrv)
> -{
> -	driver_unregister(&rpdrv->drv);
> -}
> -EXPORT_SYMBOL(unregister_rpmsg_driver);
> -
> -static void rpmsg_release_device(struct device *dev)
> -{
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -
> -	kfree(rpdev);
> -}
> -
> -/*
> - * match an rpmsg channel with a channel info struct.
> - * this is used to make sure we're not creating rpmsg devices for channels
> - * that already exist.
> - */
> -static int rpmsg_device_match(struct device *dev, void *data)
> -{
> -	struct rpmsg_channel_info *chinfo = data;
> -	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
> -
> -	if (chinfo->src != RPMSG_ADDR_ANY && chinfo->src != rpdev->src)
> -		return 0;
> -
> -	if (chinfo->dst != RPMSG_ADDR_ANY && chinfo->dst != rpdev->dst)
> -		return 0;
> -
> -	if (strncmp(chinfo->name, rpdev->id.name, RPMSG_NAME_SIZE))
> -		return 0;
> -
> -	/* found a match ! */
> -	return 1;
> -}
> -
>  static const struct rpmsg_device virtio_rpmsg_ops = {
>  	.create_ept = virtio_rpmsg_create_ept,
>  	.destroy_ept = virtio_rpmsg_destroy_ept,
> @@ -556,7 +297,7 @@ static struct rpmsg_device
> *rpmsg_create_channel(struct virtproc_info *vrp,
>  	int ret;
> 
>  	/* make sure a similar channel doesn't already exist */
> -	tmp = device_find_child(dev, chinfo, rpmsg_device_match);
> +	tmp = rpmsg_find_device(dev, chinfo);
>  	if (tmp) {
>  		/* decrement the matched device's refcount back */
>  		put_device(tmp);
> @@ -592,47 +333,6 @@ static struct rpmsg_device
> *rpmsg_create_channel(struct virtproc_info *vrp,
>  	return rpdev;
>  }
> 
> -static int rpmsg_register_device(struct rpmsg_device *rpdev)
> -{
> -	struct device *dev = &rpdev->dev;
> -	int ret;
> -
> -	dev_set_name(&rpdev->dev, "%s:%s",
> -		     dev_name(dev->parent), rpdev->id.name);
> -
> -	rpdev->dev.bus = &rpmsg_bus;
> -	rpdev->dev.release = rpmsg_release_device;
> -
> -	ret = device_register(&rpdev->dev);
> -	if (ret) {
> -		dev_err(dev, "device_register failed: %d\n", ret);
> -		put_device(&rpdev->dev);
> -	}
> -
> -	return ret;
> -}
> -
> -/*
> - * find an existing channel using its name + address properties,
> - * and destroy it
> - */
> -static int rpmsg_destroy_channel(struct virtproc_info *vrp,
> -				 struct rpmsg_channel_info *chinfo)
> -{
> -	struct virtio_device *vdev = vrp->vdev;
> -	struct device *dev;
> -
> -	dev = device_find_child(&vdev->dev, chinfo, rpmsg_device_match);
> -	if (!dev)
> -		return -EINVAL;
> -
> -	device_unregister(dev);
> -
> -	put_device(dev);
> -
> -	return 0;
> -}
> -
>  /* super simple buffer "allocator" that is just enough for now */
>  static void *get_a_tx_buf(struct virtproc_info *vrp)
>  {
> @@ -844,31 +544,6 @@ out:
>  	return err;
>  }
> 
> -/**
> - * rpmsg_send() - send a message across to the remote processor
> - * @ept: the rpmsg endpoint
> - * @data: payload of message
> - * @len: length of payload
> - *
> - * This function sends @data of length @len on the @ept endpoint.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to, using @ept's address and its associated rpmsg
> - * device destination addresses.
> - * In case there are no TX buffers available, the function will block until
> - * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> - * happens, -ERESTARTSYS is returned.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->send(ept, data, len);
> -}
> -
>  static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
>  {
>  	struct rpmsg_device *rpdev = ept->rpdev;
> @@ -877,32 +552,6 @@ static int virtio_rpmsg_send(struct rpmsg_endpoint
> *ept, void *data, int len)
>  	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
>  }
> 
> -/**
> - * rpmsg_sendto() - send a message across to the remote processor, specify
> dst
> - * @ept: the rpmsg endpoint
> - * @data: payload of message
> - * @len: length of payload
> - * @dst: destination address
> - *
> - * This function sends @data of length @len to the remote @dst address.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to, using @ept's address as source.
> - * In case there are no TX buffers available, the function will block until
> - * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> - * happens, -ERESTARTSYS is returned.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->sendto(ept, data, len, dst);
> -}
> -EXPORT_SYMBOL(rpmsg_sendto);
> -
>  static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int
> len,
>  			       u32 dst)
>  {
> @@ -912,35 +561,6 @@ static int virtio_rpmsg_sendto(struct
> rpmsg_endpoint *ept, void *data, int len,
>  	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
>  }
> 
> -/**
> - * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
> - * @ept: the rpmsg endpoint
> - * @src: source address
> - * @dst: destination address
> - * @data: payload of message
> - * @len: length of payload
> - *
> - * This function sends @data of length @len to the remote @dst address,
> - * and uses @src as the source address.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to.
> - * In case there are no TX buffers available, the function will block until
> - * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> - * happens, -ERESTARTSYS is returned.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
> -			  void *data, int len)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->send_offchannel(ept, src, dst, data, len);
> -}
> -EXPORT_SYMBOL(rpmsg_send_offchannel);
> -
>  static int virtio_rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32
> src,
>  					u32 dst, void *data, int len)
>  {
> @@ -949,31 +569,6 @@ static int virtio_rpmsg_send_offchannel(struct
> rpmsg_endpoint *ept, u32 src,
>  	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
>  }
> 
> -/**
> - * rpmsg_send() - send a message across to the remote processor
> - * @ept: the rpmsg endpoint
> - * @data: payload of message
> - * @len: length of payload
> - *
> - * This function sends @data of length @len on the @ept endpoint.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to, using @ept's addres as source and its associated
> - * rpdev's address as destination.
> - * In case there are no TX buffers available, the function will immediately
> - * return -ENOMEM without waiting until one becomes available.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->trysend(ept, data, len);
> -}
> -EXPORT_SYMBOL(rpmsg_trysend);
> -
>  static int virtio_rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int
> len)
>  {
>  	struct rpmsg_device *rpdev = ept->rpdev;
> @@ -982,31 +577,6 @@ static int virtio_rpmsg_trysend(struct
> rpmsg_endpoint *ept, void *data, int len)
>  	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
>  }
> 
> -/**
> - * rpmsg_sendto() - send a message across to the remote processor, specify
> dst
> - * @ept: the rpmsg endpoint
> - * @data: payload of message
> - * @len: length of payload
> - * @dst: destination address
> - *
> - * This function sends @data of length @len to the remote @dst address.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to, using @ept's address as source.
> - * In case there are no TX buffers available, the function will immediately
> - * return -ENOMEM without waiting until one becomes available.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32
> dst)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->trysendto(ept, data, len, dst);
> -}
> -EXPORT_SYMBOL(rpmsg_trysendto);
> -
>  static int virtio_rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data,
>  				  int len, u32 dst)
>  {
> @@ -1016,34 +586,6 @@ static int virtio_rpmsg_trysendto(struct
> rpmsg_endpoint *ept, void *data,
>  	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
>  }
> 
> -/**
> - * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
> - * @ept: the rpmsg endpoint
> - * @src: source address
> - * @dst: destination address
> - * @data: payload of message
> - * @len: length of payload
> - *
> - * This function sends @data of length @len to the remote @dst address,
> - * and uses @src as the source address.
> - * The message will be sent to the remote processor which the @ept
> - * endpoint belongs to.
> - * In case there are no TX buffers available, the function will immediately
> - * return -ENOMEM without waiting until one becomes available.
> - *
> - * Can only be called from process context (for now).
> - *
> - * Returns 0 on success and an appropriate error value on failure.
> - */
> -int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32
> dst,
> -			     void *data, int len)
> -{
> -	struct rpmsg_device *rpdev = ept->rpdev;
> -
> -	return rpdev->trysend_offchannel(ept, src, dst, data, len);
> -}
> -EXPORT_SYMBOL(rpmsg_trysend_offchannel);
> -
>  static int virtio_rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32
> src,
>  					   u32 dst, void *data, int len)
>  {
> @@ -1208,7 +750,7 @@ static void rpmsg_ns_cb(struct rpmsg_device
> *rpdev, void *data, int len,
>  	chinfo.dst = msg->addr;
> 
>  	if (msg->flags & RPMSG_NS_DESTROY) {
> -		ret = rpmsg_destroy_channel(vrp, &chinfo);
> +		ret = rpmsg_unregister_device(&vrp->vdev->dev, &chinfo);
>  		if (ret)
>  			dev_err(dev, "rpmsg_destroy_channel failed: %d\n",
> ret);
>  	} else {
> @@ -1393,17 +935,9 @@ static int __init rpmsg_init(void)
>  {
>  	int ret;
> 
> -	ret = bus_register(&rpmsg_bus);
> -	if (ret) {
> -		pr_err("failed to register rpmsg bus: %d\n", ret);
> -		return ret;
> -	}
> -
>  	ret = register_virtio_driver(&virtio_ipc_driver);
> -	if (ret) {
> +	if (ret)
>  		pr_err("failed to register virtio driver: %d\n", ret);
> -		bus_unregister(&rpmsg_bus);
> -	}
> 
>  	return ret;
>  }
> @@ -1412,7 +946,6 @@ subsys_initcall(rpmsg_init);
>  static void __exit rpmsg_fini(void)
>  {
>  	unregister_virtio_driver(&virtio_ipc_driver);
> -	bus_unregister(&rpmsg_bus);
>  }
>  module_exit(rpmsg_fini);
> 
> --
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html