Re: [PATCH] mm, numa: boot cpu should bound to the node0 when node_off enable

[zhong jiang]

On 2016/8/19 1:45, Ganapatrao Kulkarni wrote:
> On Thu, Aug 18, 2016 at 9:34 PM, Catalin Marinas
> <catalin.marinas@xxxxxxx> wrote:
>> On Thu, Aug 18, 2016 at 09:09:26PM +0800, zhongjiang wrote:
>>> At present, boot cpu will bound to a node from device tree when node_off enable.
>>> if the node is not initialization, it will lead to a following problem.
>>>
>>>  next_zones_zonelist+0x18/0x80
>>>  __build_all_zonelists+0x1e0/0x288
>>>  build_all_zonelists_init+0x10/0x1c
>>>  build_all_zonelists+0x114/0x128
>>>  start_kernel+0x1a0/0x414
>> I think this "problem" is missing a lot of information. Is this supposed
>> to be a kernel panic?
yes, it will leads to kernel crash. the details is as follows.
 
Unable to handle kernel paging request at virtual address 00001690
pgd = ffff800001226000
[00001690] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
 Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.1.27-vhulk3.6.5.aarch64 #1
Hardware name: Hisilicon Hi1612 Development Board (DT)
 task: ffff80000102b730 ti: ffff800001018000 task.ti: ffff800001018000
PC is at next_zones_zonelist+0x18/0x80
 LR is at __build_all_zonelists+0x1e0/0x288
next_zones_zonelist+0x18/0x80
 __build_all_zonelists+0x1e0/0x288
build_all_zonelists_init+0x10/0x1c
 build_all_zonelists+0x114/0x128
 start_kernel+0x1a0/0x414
>>> The patch fix it by fallback to node 0. therefore, the cpu will bound to the node
>>> correctly.
>>>
>>> Signed-off-by: zhongjiang <zhongjiang@xxxxxxxxxx>
>>> ---
>>>  arch/arm64/mm/numa.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
>>> index 4dcd7d6..1f8f5da 100644
>>> --- a/arch/arm64/mm/numa.c
>>> +++ b/arch/arm64/mm/numa.c
>>> @@ -119,7 +119,7 @@ void numa_store_cpu_info(unsigned int cpu)
>>>  void __init early_map_cpu_to_node(unsigned int cpu, int nid)
>>>  {
>>>       /* fallback to node 0 */
>>> -     if (nid < 0 || nid >= MAX_NUMNODES)
>>> +     if (nid < 0 || nid >= MAX_NUMNODES || numa_off)
> i  did not understood how this line change fixes the issue that you
> have mentioned (i too not understood fully the issue description)
> this array used while mapping node id when secondary cores comes up
> when numa_off is set the cpu_to_node_map[cpu] is not used and set to
> node0 always( refer function numa_store_cpu_info)..
> please provide more details to understand the issue you are facing.
> /*
>  *  Set the cpu to node and mem mapping
>  */
> void numa_store_cpu_info(unsigned int cpu)
> {
>         map_cpu_to_node(cpu, numa_off ? 0 : cpu_to_node_map[cpu]);
> }
>
> thanks
> Ganapat
>>>               nid = 0;
>>>
>>>       cpu_to_node_map[cpu] = nid;
>> The patch looks fine (slight inconsistence from the map_cpu_to_node()
>> callers but I guess we don't want to expose numa_off outside this file).
>> I would however like to see an Ack from Ganapat (cc'ed).
>>
>> --
>> Catalin
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> .
>