Re: [PATCH v4 0/4] Add support for cros-ec-sensors

From: Jonathan Cameron
Date: Sun Aug 21 2016 - 15:58:26 EST


On 16/08/16 13:49, Lee Jones wrote:
> On Mon, 15 Aug 2016, Jonathan Cameron wrote:
>
>> On 01/08/16 10:54, Enric Balletbo i Serra wrote:
>>> Hi,
>>>
>>> This is the four patchset to add support for the sensors behind the ChromeOS
>>> Embedded Controller.
>>>
>>> This version has only the patches to support common functions and 3d
>>> contiguous sensors like Accelerometers, Gyroscope and Magnetometer that are
>>> presented by the ChromeOS EC Sensor hub. The patches were tested on an Oak board.
>>>
>>> The code was checked out from the ChromeOS v3.18 tree and forward ported to
>>> mainline solving all the conflicts and build issues. I splitted the code in
>>> single patches that have sense by themselves in order to avoid the chances
>>> to fail.
>>>
>>> Note that the patches depends on this [1] to apply and work.
>>>
>>> [1] https://lkml.org/lkml/2016/7/1/188
>> Given this dependency I'm assuming the best route for these is via
>> the MFD tree...
>>
>> Lee, shout if you want them to go a different route.
>
> IIO looks like a more suitable route. Please provide me with a
> pull-request base off of an immutable tag.
Hi Lee,

As far as I can tell the precursor patch above hasn't gone in your
tree yet which leaves me unable to take this through IIO for now.

Maybe I'm missing something!

Jonathan
>
>>> Waiting for your reviews and feedback.
>>>
>>> Changes since v3 (requested by Guenter Roeck)
>>> - Convert structure to a simple array
>>> - Remove PM declarations
>>> - Remove unnecessary initializations
>>> - cros_ec_sensors_cmd_read_u16: Conversion should only be done if ret >= 0
>>> - Remove unnecessary else
>>> - Add Reviewed-by tag for two last patches.
>>>
>>> Changes since v2 (requested by Guenter Roeck and Jonhatan Cameron)
>>> - Rebased and fix build error.
>>> - Include a list of possible values in the description of location attr.
>>> - Fix some typos.
>>> - Remove id sysfs entry.
>>> - Skip filling by zero structure parameters that already zero'd.
>>> - Order includes alphabetically.
>>> - Propagate error codes.
>>>
>>> Changes since v1 (requested by Peter Meerwald-Stadler and Jonhatan Cameron)
>>> - Check kernel-doc documentation and
>>> - Bring some patches together.
>>> - Fix some spelling mistakes.
>>> - Include ABI documentation.
>>> - Be more careful with buffer sizes (sprintf -> snprintf)
>>> - Add cros_ec_sensors prefix to all function.
>>> - Check return values on some functions.
>>>
>>> Best regards,
>>>
>>> Enric Balletbo i Serra (3):
>>> iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC
>>> Sensor Hub.
>>> iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
>>> platform/chrome: cros_ec_dev - Register cros-ec sensors
>>>
>>> Vincent Palatin (1):
>>> platform/chrome: Introduce a new function to check EC features.
>>>
>>> Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 18 +
>>> drivers/iio/common/Kconfig | 1 +
>>> drivers/iio/common/Makefile | 1 +
>>> drivers/iio/common/cros_ec_sensors/Kconfig | 22 +
>>> drivers/iio/common/cros_ec_sensors/Makefile | 6 +
>>> .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 322 +++++++++++++++
>>> .../common/cros_ec_sensors/cros_ec_sensors_core.c | 450 +++++++++++++++++++++
>>> .../common/cros_ec_sensors/cros_ec_sensors_core.h | 175 ++++++++
>>> drivers/platform/chrome/cros_ec_dev.c | 159 ++++++++
>>> include/linux/mfd/cros_ec.h | 10 +
>>> include/linux/mfd/cros_ec_commands.h | 183 ++++++++-
>>> 11 files changed, 1342 insertions(+), 5 deletions(-)
>>> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cros-ec
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/Kconfig
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/Makefile
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
>>>
>>
>