Re: [RFC PATCH v2] clk: move check of CLK_SET_RATE_GATE flag to clk_propagate_rate_change()

[Jiada Wang]

Hello Stephen

On 08/11/2016 07:19 AM, Stephen Boyd wrote:
> On 07/10, jiada_wang@xxxxxxxxxx wrote:
> > From: Jiada Wang <jiada_wang@xxxxxxxxxx>
> >
> > Previously CLK_SET_RATE_GATE flag is only checked in clk_set_rate()
> > which only ensures the clock being called by clk_set_rate() won't
> > change rate when it has been prepared if CLK_SET_RATE_GATE flag is set.
> > But a clk_set_rate() request may propagate rate change to these clocks
> > from the requested clock's topmost parent clock to all its offsprings,
>
> s/offsprings/children/ please
will update in next version.

> > when any one of these clocks has CLK_SET_RATE_GATE flag set
> > and it has been prepared, the clk_set_rate() request should fail.
> >
> > This patch moves check of CLK_SET_RATE_GATE flag to
> > clk_propagate_rate_change() to ensure all affected clocks will
> > be checked if their rate will be changed after clk_set_rate().
> >
> > Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
>
> I'm slightly worried that this will break providers that were
> relying on the previous (mis)behavior of this flag. For example,
> I think I have this flag set on clks in the qcom/gcc-msm8960.c
> driver that have so far not triggered but will trigger now with
> this patch. I suppose we should just delete the flag from those
> clks because things are working fine so far anyway.
I am also worrying about this, that was why I added RFC tag in my patch.
I am not sure if remove all existing CLK_SET_RATE_GATE flags will cause
any issue, for example CLK_SET_RATE_GATE flag still works for these
clocks directly called by clk_set_rate(). if remove all
CLK_SET_RATE_GATE flags, will cause functional change for these clocks.

> This also brings up the question about what drivers should do if
> this flag is set and clk_set_rate() fails. Should drivers need to
> know if they're on a platform where clk_set_rate() is going to
> fail because the clk is not gated and take appropriate action?
> How would they know this? Or should the framework forcibly gate
> the clk and all the children, change the rate, and then ungate?
IMO, an error message with the error'ing clock to notify user that
clk_set_rate() is necessary. but clock framework don't need to forcibly
gate the clock (as the clock with CLK_SET_RATE_GATE flag maybe owned by
some other module)

Thanks,
Jiada