[PATCH v3 1/2] ARM: dts: Add MDM9615 dtsi
From: Neil Armstrong
Date: Tue Aug 23 2016 - 07:38:20 EST
In order to support the Qualcomm MDM9615 SoC, add the SoC dtsi.
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-mdm9615.dtsi | 555 ++++++++++++++++++++++++++++++++++++
1 file changed, 555 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-mdm9615.dtsi
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
new file mode 100644
index 0000000..e30bfbd
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -0,0 +1,555 @@
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@xxxxxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+ model = "Qualcomm MDM9615";
+ compatible = "qcom,mdm9615";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a5";
+ device_type = "cpu";
+ next-level-cache = <&L2>;
+ };
+ };
+
+ cpu-pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <GIC_SPI 10 0x304>;
+ };
+
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+ };
+
+ regulators {
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x02040000 0x1000>;
+ arm,data-latency = <2 2 0>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x02000000 0x1000>,
+ <0x02002000 0x1000>;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <GIC_PPI 1 0x101>,
+ <GIC_PPI 2 0x101>,
+ <GIC_PPI 3 0x101>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,mdm9615-pinctrl";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800000 0x4000>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-mdm9615";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ lcc: clock-controller@28000000 {
+ compatible = "qcom,lcc-mdm9615";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ l2cc: clock-controller@2011000 {
+ compatible = "syscon";
+ reg = <0x02011000 0x1000>;
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ assigned-clocks = <&gcc PRNG_CLK>;
+ assigned-clock-rates = <32000000>;
+ };
+
+ gsbi2: gsbi@16100000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
+ reg = <0x16100000 0x100>;
+ clocks = <&gcc GSBI2_H_CLK>;
+ clock-names = "iface";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi2_i2c: i2c@16180000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x16180000 0x1000>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ gsbi3: gsbi@16200000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <3>;
+ reg = <0x16200000 0x100>;
+ clocks = <&gcc GSBI3_H_CLK>;
+ clock-names = "iface";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi3_spi: spi@16280000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x16280000 0x1000>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ spi-max-frequency = <24000000>;
+
+ clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ gsbi4: gsbi@16300000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
+ reg = <0x16300000 0x100>;
+ clocks = <&gcc GSBI4_H_CLK>;
+ clock-names = "iface";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi4_serial: serial@16340000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16340000 0x1000>,
+ <0x16300000 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ gsbi5: gsbi@16400000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x16400000 0x100>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi5_i2c: i2c@16480000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x16480000 0x1000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* QUP clock is not initialized, set rate */
+ assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi5_serial: serial@16440000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8018", "qcom,pm8921";
+ interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 IRQ_TYPE_NONE>,
+ <51 IRQ_TYPE_NONE>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pmicmpp: mpp@50 {
+ compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <24 IRQ_TYPE_NONE>,
+ <25 IRQ_TYPE_NONE>,
+ <26 IRQ_TYPE_NONE>,
+ <27 IRQ_TYPE_NONE>,
+ <28 IRQ_TYPE_NONE>,
+ <29 IRQ_TYPE_NONE>;
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 IRQ_TYPE_NONE>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ pmicgpio: gpio@150 {
+ compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <24 IRQ_TYPE_NONE>,
+ <25 IRQ_TYPE_NONE>,
+ <26 IRQ_TYPE_NONE>,
+ <27 IRQ_TYPE_NONE>,
+ <28 IRQ_TYPE_NONE>,
+ <29 IRQ_TYPE_NONE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
+ sdcc1bam: dma@12182000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc2bam: dma@12142000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12142000 0x8000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC2_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc@12180000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ assigned-clocks = <&gcc SDC1_CLK>;
+ assigned-clock-rates = <400000>;
+ };
+
+ sdcc2: sdcc@12140000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12140000 0x2000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
+ no-1-8-v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+ dma-names = "tx", "rx";
+ assigned-clocks = <&gcc SDC2_CLK>;
+ assigned-clock-rates = <400000>;
+ };
+ };
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-mdm9615", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-mdm9615";
+ reg = <0x108000 0x1000>;
+
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8018-regulators";
+
+ vin_lvs1-supply = <&pm8018_s3>;
+
+ vdd_l7-supply = <&pm8018_s4>;
+ vdd_l8-supply = <&pm8018_s3>;
+ vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+ /* Buck SMPS */
+ pm8018_s1: s1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s2: s2 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s3: s3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s4: s4 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8018_s5: s5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8018_l2: l2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l3: l3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8018_l4: l4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8018_l5: l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8018_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8018_l8: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8018_l9: l9 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8018_l10: l10 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l11: l11 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l12: l12 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8018_l13: l13 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8018_l14: l14 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8018_lvs1: lvs1 {
+ bias-pull-down;
+ };
+ };
+ };
+ };
+};
--
1.9.1