Re: [v10,2/2] PCI: Rockchip: Add Rockchip PCIe controller support

From: Guenter Roeck
Date: Wed Aug 31 2016 - 14:18:07 EST

Next message: Alan Stern: "Re: [PATCH V4] leds: trigger: Introduce an USB port trigger"
Previous message: KY Srinivasan: "RE: [PATCH 1/2] Drivers: hv: utils: Continue to poll VSS channel after handling requests."
Next in thread: Shawn Lin: "Re: [v10,2/2] PCI: Rockchip: Add Rockchip PCIe controller support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Aug 19, 2016 at 09:34:58AM +0800, Shawn Lin wrote:
> This patch adds Rockchip PCIe controller support found
> on RK3399 Soc platform.
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>
> Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
>
> Changes in v10:
> - remove ARM64 dependencies from Kconfig
>
> Changes in v9:
> - ident definition of constants with tabs instead of spaces
> - remove some unused constans and remove the 'U' postfix of contants
> - use BIT(X) consistently as possible
> - indent the field definitions with two spaces to show the association
> with the register name
> - improve rockchip_pcie_rd_own_conf and rockchip_pcie_wr_conf
> - fix misleading indentation
> - remove a checking for ib_atu
> - check the initialization of variables to make sure they would not
> be used without initialization
> - some minor upper-case fix and blank lines fix.
>
> Changes in v8:
> - fix all the commets suggested by Bjorn Helgaas in v7[1]
> [1] https://patchwork.kernel.org/patch/9233887/
> - enable bandwith interrupt for debug
>
> Changes in v7:
> - make it as a build-in driver
> - improve gen1/2 training timeout checking
> - only clear known interrupt
> - fix INTx for 0-base index
>
> Changes in v6:
> - use "depends on PCI_MSI_IRQ_DOMAIN" suggested by Arnd
>
> Changes in v5:
> - handle multiple pending INTx at the same time
> suggested by Marc
>
> Changes in v4:
> - address the comments from Brain
>
> Changes in v3:
> - remove header file
> - remove struct msi_controller and move most of variables
> of rockchip_pcie_port to become the local ones.
> - allow legacy int even if enabling MSI
> - drop regulator set voltage operation suggested by Doug
>
> Changes in v2:
> - remove phy related stuff and call phy API
> - add new head file and define lots of macro to make
> the code more readable
> - remove lots msi related code suggested by Marc
> - add IO window address translation
> - init_port and parse_dt reconstruction suggested by Bharat
> - improve wr_own_conf suggested by Arnd
> - make pcie as an interrupt controller and fix wrong int handler
> suggested by Marc
> - remove PCI_PROBE_ONLY suggested by Lorenzo
>
> drivers/pci/host/Kconfig | 11 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-rockchip.c | 1251 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1263 insertions(+)
> create mode 100644 drivers/pci/host/pcie-rockchip.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 9b485d8..90f5e89 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -274,4 +274,15 @@ config PCIE_ARTPEC6
> Say Y here to enable PCIe controller support on Axis ARTPEC-6
> SoCs. This PCIe controller uses the DesignWare core.
>
> +config PCIE_ROCKCHIP
> + bool "Rockchip PCIe controller"
> + depends on ARCH_ROCKCHIP
> + depends on OF
> + depends on PCI_MSI_IRQ_DOMAIN
> + select MFD_SYSCON
> + help
> + Say Y here if you want internal PCI support on Rockchip SoC.
> + There is 1 internal PCIe port available to support GEN2 with
> + 4 slots.
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 8843410..a8afc16 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -31,3 +31,4 @@ obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
> obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
> obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> +obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c
> new file mode 100644
> index 0000000..eaea84d
> --- /dev/null
> +++ b/drivers/pci/host/pcie-rockchip.c
> @@ -0,0 +1,1251 @@
> +/*
> + * Rockchip AXI PCIe host controller driver
> + *
> + * Copyright (c) 2016 Rockchip, Inc.
> + *
> + * Author: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> + * Wenrui Li <wenrui.li@xxxxxxxxxxxxxx>
> + *
> + * Bits taken from Synopsys Designware Host controller driver and
> + * ARM PCI Host generic driver.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/pci_ids.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +
> +#define PCIE_CLIENT_BASE 0x0
> +#define PCIE_RC_CONFIG_NORMAL_BASE 0x800000
> +#define PCIE_RC_CONFIG_BASE 0xa00000
> +#define PCIE_RC_CONFIG_LCSR 0xd0
> +#define PCIE_RC_CONFIG_LCSR_LBMIE BIT(10)
> +#define PCIE_RC_CONFIG_LCSR_LABIE BIT(11)
> +#define PCIE_RC_CONFIG_LCSR_LBMS BIT(30)
> +#define PCIE_RC_CONFIG_LCSR_LAMS BIT(31)
> +#define PCIE_CORE_CTRL_MGMT_BASE 0x900000
> +#define PCIE_CORE_AXI_CONF_BASE 0xc00000
> +#define PCIE_CORE_AXI_INBOUND_BASE 0xc00800
> +#define PCIE_CLIENT_BASIC_STATUS1 0x48
> +#define PCIE_CLIENT_INT_MASK 0x4c
> +#define PCIE_CLIENT_INT_STATUS 0x50
> +#define PCIE_CLIENT_INT_LEGACY_DONE BIT(15)
> +#define PCIE_CLIENT_INT_MSG BIT(14)
> +#define PCIE_CLIENT_INT_HOT_RST BIT(13)
> +#define PCIE_CLIENT_INT_DPA BIT(12)
> +#define PCIE_CLIENT_INT_FATAL_ERR BIT(11)
> +#define PCIE_CLIENT_INT_NFATAL_ERR BIT(10)
> +#define PCIE_CLIENT_INT_CORR_ERR BIT(9)
> +#define PCIE_CLIENT_INT_INTD BIT(8)
> +#define PCIE_CLIENT_INT_INTC BIT(7)
> +#define PCIE_CLIENT_INT_INTB BIT(6)
> +#define PCIE_CLIENT_INT_INTA BIT(5)
> +#define PCIE_CLIENT_INT_LOCAL BIT(4)
> +#define PCIE_CLIENT_INT_UDMA BIT(3)
> +#define PCIE_CLIENT_INT_PHY BIT(2)
> +#define PCIE_CLIENT_INT_HOT_PLUG BIT(1)
> +#define PCIE_CLIENT_INT_PWR_STCG BIT(0)
> +#define PCIE_RC_CONFIG_RID_CCR 0x8
> +#define PCIE_RC_CONFIG_LCS 0xd0
> +#define PCIE_RC_BAR_CONF 0x300
> +#define PCIE_CORE_OB_REGION_ADDR1 0x4
> +#define PCIE_CORE_OB_REGION_DESC0 0x8
> +#define PCIE_CORE_OB_REGION_DESC1 0xc
> +#define PCIE_CORE_OB_REGION_ADDR0_NUM_BITS 0x3f
> +#define PCIE_CORE_OB_REGION_ADDR0_LO_ADDR 0xffffff00
> +#define PCIE_CORE_IB_REGION_ADDR0_NUM_BITS 0x3f
> +#define PCIE_CORE_IB_REGION_ADDR0_LO_ADDR 0xffffff00
> +#define PCIE_RP_IB_ADDR_TRANS 0x4
> +#define PCIE_CORE_INT_MASK 0x900210
> +#define PCIE_CORE_INT_STATUS 0x90020c
> +#define PCIE_CORE_INT_PRFPE BIT(0)
> +#define PCIE_CORE_INT_CRFPE BIT(1)
> +#define PCIE_CORE_INT_RRPE BIT(2)
> +#define PCIE_CORE_INT_PRFO BIT(3)
> +#define PCIE_CORE_INT_CRFO BIT(4)
> +#define PCIE_CORE_INT_RT BIT(5)
> +#define PCIE_CORE_INT_RTR BIT(6)
> +#define PCIE_CORE_INT_PE BIT(7)
> +#define PCIE_CORE_INT_MTR BIT(8)
> +#define PCIE_CORE_INT_UCR BIT(9)
> +#define PCIE_CORE_INT_FCE BIT(10)
> +#define PCIE_CORE_INT_CT BIT(11)
> +#define PCIE_CORE_INT_UTC BIT(18)
> +#define PCIE_CORE_INT_MMVC BIT(19)
> +
> +/* Size of one AXI Region (not Region 0) */
> +#define AXI_REGION_SIZE BIT(20)
> +/* Size of Region 0, equal to sum of sizes of other regions */
> +#define AXI_REGION_0_SIZE (32 * (0x1 << 20))
> +#define OB_REG_SIZE_SHIFT 5
> +#define IB_ROOT_PORT_REG_SIZE_SHIFT 3
> +#define AXI_WRAPPER_IO_WRITE 0x6
> +#define AXI_WRAPPER_MEM_WRITE 0x2
> +
> +#define MAX_AXI_IB_ROOTPORT_REGION_NUM 3
> +#define MIN_AXI_ADDR_BITS_PASSED 8
> +#define ROCKCHIP_VENDOR_ID 0x1d87
> +#define PCIE_ECAM_BUS(x) (((x) & 0xff) << 20)
> +#define PCIE_ECAM_DEV(x) (((x) & 0x1f) << 15)
> +#define PCIE_ECAM_FUNC(x) (((x) & 0x7) << 12)
> +#define PCIE_ECAM_REG(x) (((x) & 0xfff) << 0)
> +#define PCIE_ECAM_ADDR(bus, dev, func, reg) \
> + (PCIE_ECAM_BUS(bus) | PCIE_ECAM_DEV(dev) | \
> + PCIE_ECAM_FUNC(func) | PCIE_ECAM_REG(reg))
> +
> +/*
> + * The higher 16-bit of this register is used for write protection
> + * only if BIT(x + 16) set to 1 the BIT(x) can be written.
> + */
> +#define HIWORD_UPDATE(val, mask, shift) \
> + ((val) << (shift) | (mask) << ((shift) + 16))
> +
> +#define RC_REGION_0_ADDR_TRANS_H 0x00000000
> +#define RC_REGION_0_ADDR_TRANS_L 0x00000000
> +#define RC_REGION_0_PASS_BITS (25 - 1)
> +#define RC_REGION_1_ADDR_TRANS_H 0x00000000
> +#define RC_REGION_1_ADDR_TRANS_L 0x00400000
> +#define RC_REGION_1_PASS_BITS (20 - 1)
> +#define MAX_AXI_WRAPPER_REGION_NUM 33
> +#define PCIE_CORE_LCSR_RETRAIN_LINK BIT(5)
> +#define PCIE_CLIENT_CONF_ENABLE BIT(0)
> +#define PCIE_CLIENT_CONF_ENABLE_SHIFT 0
> +#define PCIE_CLIENT_CONF_ENABLE_MASK 0x1
> +#define PCIE_CLIENT_LINK_TRAIN_ENABLE 1
> +#define PCIE_CLIENT_LINK_TRAIN_SHIFT 1
> +#define PCIE_CLIENT_LINK_TRAIN_MASK 0x1
> +#define PCIE_CLIENT_ARI_ENABLE BIT(0)
> +#define PCIE_CLIENT_ARI_ENABLE_SHIFT 3
> +#define PCIE_CLIENT_ARI_ENABLE_MASK 0x1
> +#define PCIE_CLIENT_CONF_LANE_NUM(x) (x / 2)
> +#define PCIE_CLIENT_CONF_LANE_NUM_SHIFT 4
> +#define PCIE_CLIENT_CONF_LANE_NUM_MASK 0x3
> +#define PCIE_CLIENT_MODE_RC BIT(0)
> +#define PCIE_CLIENT_MODE_SHIFT 6
> +#define PCIE_CLIENT_MODE_MASK 0x1
> +#define PCIE_CLIENT_GEN_SEL_2 1
> +#define PCIE_CLIENT_GEN_SEL_1 0
> +#define PCIE_CLIENT_GEN_SEL_SHIFT 7
> +#define PCIE_CLIENT_GEN_SEL_MASK 0x1
> +#define PCIE_CLIENT_LINK_STATUS_UP 0x3
> +#define PCIE_CLIENT_LINK_STATUS_SHIFT 20
> +#define PCIE_CLIENT_LINK_STATUS_MASK 0x3
> +#define PCIE_CORE_PL_CONF_SPEED_2_5G 0x0
> +#define PCIE_CORE_PL_CONF_SPEED_5G 0x1
> +#define PCIE_CORE_PL_CONF_SPEED_8G 0x2
> +#define PCIE_CORE_PL_CONF_SPEED_SHIFT 3
> +#define PCIE_CORE_PL_CONF_SPEED_MASK 0x3
> +#define PCIE_CORE_PL_CONF_LANE_SHIFT 1
> +#define PCIE_CORE_PL_CONF_LANE_MASK 0x3
> +#define PCIE_CORE_RC_CONF_SCC_SHIFT 16
> +
> +#define ROCKCHIP_PCIE_RPIFR1_INTR_MASK GENMASK(8, 5)
> +#define ROCKCHIP_PCIE_RPIFR1_INTR_SHIFT 5
> +
> +#define PCIE_CORE_INT \
> + (PCIE_CORE_INT_PRFPE | PCIE_CORE_INT_CRFPE | \
> + PCIE_CORE_INT_RRPE | PCIE_CORE_INT_CRFO | \
> + PCIE_CORE_INT_RT | PCIE_CORE_INT_RTR | \
> + PCIE_CORE_INT_PE | PCIE_CORE_INT_MTR | \
> + PCIE_CORE_INT_UCR | PCIE_CORE_INT_FCE | \
> + PCIE_CORE_INT_CT | PCIE_CORE_INT_UTC | \
> + PCIE_CORE_INT_MMVC)
> +
> +#define PCIE_CLIENT_INT_SUBSYSTEM \
> + (PCIE_CLIENT_INT_PWR_STCG | PCIE_CLIENT_INT_HOT_PLUG | \
> + PCIE_CLIENT_INT_PHY | PCIE_CLIENT_INT_UDMA | \
> + PCIE_CLIENT_INT_LOCAL)
> +
PCIE_CLIENT_INT_SUBSYSTEM is not used.

> +#define PCIE_CLIENT_INT_LEGACY \
> + (PCIE_CLIENT_INT_INTA | PCIE_CLIENT_INT_INTB | \
> + PCIE_CLIENT_INT_INTC | PCIE_CLIENT_INT_INTD)
> +
> +#define PCIE_CLIENT_INT_CLI \
> + (PCIE_CLIENT_INT_CORR_ERR | PCIE_CLIENT_INT_NFATAL_ERR | \
> + PCIE_CLIENT_INT_FATAL_ERR | PCIE_CLIENT_INT_DPA | \
> + PCIE_CLIENT_INT_HOT_RST | PCIE_CLIENT_INT_MSG | \
> + PCIE_CLIENT_INT_LEGACY_DONE | PCIE_CLIENT_INT_LEGACY | \
> + PCIE_CLIENT_INT_PHY)
> +
> +struct rockchip_pcie_port {
> + void __iomem *reg_base;
> + void __iomem *apb_base;
> + struct phy *phy;
> + struct reset_control *core_rst;
> + struct reset_control *mgmt_rst;
> + struct reset_control *mgmt_sticky_rst;
> + struct reset_control *pipe_rst;
> + struct clk *aclk_pcie;
> + struct clk *aclk_perf_pcie;
> + struct clk *hclk_pcie;
> + struct clk *clk_pcie_pm;
> + struct regulator *vpcie3v3; /* 3.3V power supply */
> + struct regulator *vpcie1v8; /* 1.8V power supply */
> + struct regulator *vpcie0v9; /* 0.9V power supply */
> + struct gpio_desc *ep_gpio;
> + u32 lanes;
> + u8 root_bus_nr;
> + struct device *dev;
> + struct irq_domain *irq_domain;
> +};
> +
> +static inline u32 pcie_read(struct rockchip_pcie_port *port, u32 reg)
> +{
> + return readl(port->apb_base + reg);
> +}
> +
> +static inline void pcie_write(struct rockchip_pcie_port *port,
> + u32 val, u32 reg)
> +{
> + writel(val, port->apb_base + reg);
> +}
> +
> +static void rockchip_pcie_enable_bw_int(struct rockchip_pcie_port *port)
> +{
> + u32 status;
> +
> + status = pcie_read(port, PCIE_RC_CONFIG_BASE +
> + PCIE_RC_CONFIG_LCSR);
> + status |= (PCIE_RC_CONFIG_LCSR_LBMIE | PCIE_RC_CONFIG_LCSR_LABIE);
> + pcie_write(port, status, PCIE_RC_CONFIG_BASE +
> + PCIE_RC_CONFIG_LCSR);
> +}
> +
> +static void rockchip_pcie_clr_bw_int(struct rockchip_pcie_port *port)
> +{
> + u32 status;
> +
> + status = pcie_read(port, PCIE_RC_CONFIG_BASE +
> + PCIE_RC_CONFIG_LCSR);
> + status |= (PCIE_RC_CONFIG_LCSR_LBMS | PCIE_RC_CONFIG_LCSR_LAMS);
> + pcie_write(port, status, PCIE_RC_CONFIG_BASE +
> + PCIE_RC_CONFIG_LCSR);
> +}
> +
> +static int rockchip_pcie_valid_config(struct rockchip_pcie_port *pp,
> + struct pci_bus *bus, int dev)

bool return value ?

> +{
> + /* access only one slot on each root port */
> + if (bus->number == pp->root_bus_nr && dev > 0)
> + return 0;
> +
> + /*
> + * do not read more than one device on the bus directly attached
> + * to RC's downstream side.
> + */
> + if (bus->primary == pp->root_bus_nr && dev > 0)
> + return 0;
> +
> + return 1;
> +}
> +
> +static int rockchip_pcie_rd_own_conf(struct rockchip_pcie_port *pp,
> + int where, int size,
> + u32 *val)
> +{
> + void __iomem *addr = pp->apb_base + PCIE_RC_CONFIG_BASE + where;
> +
> + if (!IS_ALIGNED((uintptr_t)addr, size)) {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> +
> + if (size == 4) {
> + *val = readl(addr);
> + } else if (size == 2) {
> + *val = readw(addr);
> + } else if (size == 1) {
> + *val = readb(addr);
> + } else {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rockchip_pcie_wr_own_conf(struct rockchip_pcie_port *pp,
> + int where, int size, u32 val)
> +{
> + u32 mask, tmp, offset;
> +
> + offset = (where & (~0x3));

Unnecessary ( ). "offset = where & ~0x03;" would be equivalent.

> +
> + if (size == 4) {
> + writel(val, pp->apb_base + PCIE_RC_CONFIG_BASE + offset);
> + return PCIBIOS_SUCCESSFUL;
> + }
> +
> + mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
> +
> + tmp = readl(pp->apb_base + PCIE_RC_CONFIG_BASE + offset) & mask;
> + tmp |= val << ((where & 0x3) * 8);
> + writel(tmp, pp->apb_base + PCIE_RC_CONFIG_BASE + offset);
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rockchip_pcie_rd_other_conf(struct rockchip_pcie_port *pp,
> + struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 *val)
> +{
> + u32 busdev;
> +
> + busdev = PCIE_ECAM_ADDR(bus->number, PCI_SLOT(devfn),
> + PCI_FUNC(devfn), where);
> +
> + if (!IS_ALIGNED(busdev, size)) {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> +
> + if (size == 4) {
> + *val = readl(pp->reg_base + busdev);
> + } else if (size == 2) {
> + *val = readw(pp->reg_base + busdev);
> + } else if (size == 1) {
> + *val = readb(pp->reg_base + busdev);
> + } else {
> + *val = 0;
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> + }
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rockchip_pcie_wr_other_conf(struct rockchip_pcie_port *pp,
> + struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 val)
> +{
> + u32 busdev;
> +
> + busdev = PCIE_ECAM_ADDR(bus->number, PCI_SLOT(devfn),
> + PCI_FUNC(devfn), where);
> + if (!IS_ALIGNED(busdev, size))
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> + if (size == 4)
> + writel(val, pp->reg_base + busdev);
> + else if (size == 2)
> + writew(val, pp->reg_base + busdev);
> + else if (size == 1)
> + writeb(val, pp->reg_base + busdev);
> + else
> + return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rockchip_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> + int size, u32 *val)
> +{
> + struct rockchip_pcie_port *pp = bus->sysdata;
> +
> + if (rockchip_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {

If rockchip_pcie_valid_config() would return bool, this could be written as

if (!rockchip_pcie_valid_config(pp, bus, PCI_SLOT(devfn)))

which would be a bit easier to read.

> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + if (bus->number == pp->root_bus_nr)
> + return rockchip_pcie_rd_own_conf(pp, where, size, val);
> +
> + return rockchip_pcie_rd_other_conf(pp, bus, devfn,
> + where, size, val);
> +
Unnecessary empty line.

> +}
> +
> +static int rockchip_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 val)
> +{
> + struct rockchip_pcie_port *pp = bus->sysdata;
> +
> + if (rockchip_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + if (bus->number == pp->root_bus_nr)
> + return rockchip_pcie_wr_own_conf(pp, where, size, val);
> +
> + return rockchip_pcie_wr_other_conf(pp, bus, devfn,
> + where, size, val);
> +}
> +
> +static struct pci_ops rockchip_pcie_ops = {
> + .read = rockchip_pcie_rd_conf,
> + .write = rockchip_pcie_wr_conf,
> +};
> +
> +/**
> + * rockchip_pcie_init_port - Initialize hardware
> + * @port: PCIe port information
> + */
> +static int rockchip_pcie_init_port(struct rockchip_pcie_port *port)
> +{
> + int err;
> + u32 status;
> + unsigned long timeout;
> +
> + gpiod_set_value(port->ep_gpio, 0);
> +
> + err = phy_init(port->phy);
> + if (err < 0) {
> + dev_err(port->dev, "fail to init phy, err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_assert(port->core_rst);
> + if (err) {
> + dev_err(port->dev, "assert core_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_assert(port->mgmt_rst);
> + if (err) {
> + dev_err(port->dev, "assert mgmt_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_assert(port->mgmt_sticky_rst);
> + if (err) {
> + dev_err(port->dev, "assert mgmt_sticky_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_assert(port->pipe_rst);
> + if (err) {
> + dev_err(port->dev, "assert pipe_rst err %d\n", err);
> + return err;
> + }
> +
> + pcie_write(port,
> + HIWORD_UPDATE(PCIE_CLIENT_CONF_ENABLE,
> + PCIE_CLIENT_CONF_ENABLE_MASK,
> + PCIE_CLIENT_CONF_ENABLE_SHIFT) |
> + HIWORD_UPDATE(PCIE_CLIENT_CONF_LANE_NUM(port->lanes),
> + PCIE_CLIENT_CONF_LANE_NUM_MASK,
> + PCIE_CLIENT_CONF_LANE_NUM_SHIFT) |
> + HIWORD_UPDATE(PCIE_CLIENT_MODE_RC,
> + PCIE_CLIENT_MODE_MASK,
> + PCIE_CLIENT_MODE_SHIFT) |
> + HIWORD_UPDATE(PCIE_CLIENT_ARI_ENABLE,
> + PCIE_CLIENT_ARI_ENABLE_MASK,
> + PCIE_CLIENT_ARI_ENABLE_SHIFT) |
> + HIWORD_UPDATE(PCIE_CLIENT_GEN_SEL_2,
> + PCIE_CLIENT_GEN_SEL_MASK,
> + PCIE_CLIENT_GEN_SEL_SHIFT),
> + PCIE_CLIENT_BASE);
> +
> + err = phy_power_on(port->phy);
> + if (err) {
> + dev_err(port->dev, "fail to power on phy, err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_deassert(port->core_rst);
> + if (err) {
> + dev_err(port->dev, "deassert core_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_deassert(port->mgmt_rst);
> + if (err) {
> + dev_err(port->dev, "deassert mgmt_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_deassert(port->mgmt_sticky_rst);
> + if (err) {
> + dev_err(port->dev, "deassert mgmt_sticky_rst err %d\n", err);
> + return err;
> + }
> +
> + err = reset_control_deassert(port->pipe_rst);
> + if (err) {
> + dev_err(port->dev, "deassert pipe_rst err %d\n", err);
> + return err;
> + }
> +
> + /* Enable Gen1 training */
> + pcie_write(port,
> + HIWORD_UPDATE(PCIE_CLIENT_LINK_TRAIN_ENABLE,
> + PCIE_CLIENT_LINK_TRAIN_MASK,
> + PCIE_CLIENT_LINK_TRAIN_SHIFT),
> + PCIE_CLIENT_BASE);
> +
> + gpiod_set_value(port->ep_gpio, 1);
> +
> + /* 500ms timeout value should be enough for Gen1/2 training */
> + timeout = jiffies + msecs_to_jiffies(500);
> +
Personally I prefer to have such values as defines at the beginning of the file.

> + for (;;) {
> + status = pcie_read(port, PCIE_CLIENT_BASIC_STATUS1);
> + if (((status >> PCIE_CLIENT_LINK_STATUS_SHIFT) &
> + PCIE_CLIENT_LINK_STATUS_MASK) ==
> + PCIE_CLIENT_LINK_STATUS_UP) {
> + dev_dbg(port->dev, "PCIe link training gen1 pass!\n");
> + break;
> + }
> +
> + msleep(20);
> +
> + if (!time_before(jiffies, timeout)) {
> + err = -ETIMEDOUT;
> + break;
> + }

Moving the msleep() here (after the time_before() check) would save
the need for the double check below.

> +
Unnecessary empty line.

> + }
> +
> + /* Double check gen1 training */
> + if (err) {
> + status = pcie_read(port, PCIE_CLIENT_BASIC_STATUS1);
> + err = (((status >> PCIE_CLIENT_LINK_STATUS_SHIFT) &
> + PCIE_CLIENT_LINK_STATUS_MASK) ==
> + PCIE_CLIENT_LINK_STATUS_UP) ? 0 : -ETIMEDOUT;
> + if (err) {
> + dev_err(port->dev, "PCIe link training gen1 timeout!\n");
> + return err;
> + }
> + }
> +
> + /*
> + * Enable retrain for gen2. This should be configured only after
> + * gen1 finished.
> + */
> + status = pcie_read(port,
> + PCIE_RC_CONFIG_LCS + PCIE_RC_CONFIG_BASE);
> + status |= PCIE_CORE_LCSR_RETRAIN_LINK;
> + pcie_write(port, status,
> + PCIE_RC_CONFIG_LCS + PCIE_RC_CONFIG_BASE);
> +
> + timeout = jiffies + msecs_to_jiffies(500);
> + for (;;) {
> + status = pcie_read(port, PCIE_CORE_CTRL_MGMT_BASE);
> + if (((status >> PCIE_CORE_PL_CONF_SPEED_SHIFT) &
> + PCIE_CORE_PL_CONF_SPEED_MASK) ==
> + PCIE_CORE_PL_CONF_SPEED_5G) {
> + dev_dbg(port->dev, "PCIe link training gen2 pass!\n");
> + break;
> + }
> +
> + msleep(20);
> +
> + if (!time_before(jiffies, timeout)) {
> + err = -ETIMEDOUT;
> + break;
> + }

Same as above - by moving the msleep() to this location the double check below
would be no longer needed.

> + }
> +
> + /* Double check gen2 training */
> + if (err) {
> + status = pcie_read(port, PCIE_CORE_CTRL_MGMT_BASE);
> + err = (((status >> PCIE_CORE_PL_CONF_SPEED_SHIFT) &
> + PCIE_CORE_PL_CONF_SPEED_MASK) ==
> + PCIE_CORE_PL_CONF_SPEED_5G) ? 0 : -ETIMEDOUT;
> + if (err)
> + dev_dbg(port->dev, "PCIe link training gen2 timeout, fall back to gen1!\n");
> + }
> +
> + /* Check the final link width from negotiated lane counter from MGMT */
> + status = pcie_read(port, PCIE_CORE_CTRL_MGMT_BASE);
> + status = 0x1 << ((status >> PCIE_CORE_PL_CONF_LANE_SHIFT) &
> + PCIE_CORE_PL_CONF_LANE_MASK);
> + dev_dbg(port->dev, "current link width is x%d\n", status);
> +
> + pcie_write(port, ROCKCHIP_VENDOR_ID, PCIE_RC_CONFIG_BASE);
> + pcie_write(port, PCI_CLASS_BRIDGE_PCI << PCIE_CORE_RC_CONF_SCC_SHIFT,
> + PCIE_RC_CONFIG_BASE + PCIE_RC_CONFIG_RID_CCR);
> + pcie_write(port, 0x0, PCIE_CORE_CTRL_MGMT_BASE + PCIE_RC_BAR_CONF);
> +
> + pcie_write(port, (RC_REGION_0_ADDR_TRANS_L + RC_REGION_0_PASS_BITS),
> + PCIE_CORE_AXI_CONF_BASE);
> + pcie_write(port, RC_REGION_0_ADDR_TRANS_H,
> + PCIE_CORE_AXI_CONF_BASE + PCIE_CORE_OB_REGION_ADDR1);
> + pcie_write(port, 0x0080000a,
> + PCIE_CORE_AXI_CONF_BASE + PCIE_CORE_OB_REGION_DESC0);
> + pcie_write(port, 0x0,
> + PCIE_CORE_AXI_CONF_BASE + PCIE_CORE_OB_REGION_DESC1);
> +
> + return 0;
> +}
> +
> +static irqreturn_t rockchip_pcie_subsys_irq_handler(int irq, void *arg)
> +{
> + struct rockchip_pcie_port *pp = arg;
> + u32 reg;
> + u32 sub_reg;
> +
> + reg = pcie_read(pp, PCIE_CLIENT_INT_STATUS);
> + if (reg & PCIE_CLIENT_INT_LOCAL) {
> + dev_dbg(pp->dev, "local interrupt received\n");
> + sub_reg = pcie_read(pp, PCIE_CORE_INT_STATUS);
> + if (sub_reg & PCIE_CORE_INT_PRFPE)
> + dev_dbg(pp->dev, "parity error detected while reading from the PNP receive FIFO RAM\n");
> +
> + if (sub_reg & PCIE_CORE_INT_CRFPE)
> + dev_dbg(pp->dev, "parity error detected while reading from the Completion Receive FIFO RAM\n");
> +
> + if (sub_reg & PCIE_CORE_INT_RRPE)
> + dev_dbg(pp->dev, "parity error detected while reading from replay buffer RAM\n");
> +
> + if (sub_reg & PCIE_CORE_INT_PRFO)
> + dev_dbg(pp->dev, "overflow occurred in the PNP receive FIFO\n");
> +
> + if (sub_reg & PCIE_CORE_INT_CRFO)
> + dev_dbg(pp->dev, "overflow occurred in the completion receive FIFO\n");
> +
> + if (sub_reg & PCIE_CORE_INT_RT)
> + dev_dbg(pp->dev, "replay timer timed out\n");
> +
> + if (sub_reg & PCIE_CORE_INT_RTR)
> + dev_dbg(pp->dev, "replay timer rolled over after 4 transmissions of the same TLP\n");
> +
> + if (sub_reg & PCIE_CORE_INT_PE)
> + dev_dbg(pp->dev, "phy error detected on receive side\n");
> +
> + if (sub_reg & PCIE_CORE_INT_MTR)
> + dev_dbg(pp->dev, "malformed TLP received from the link\n");
> +
> + if (sub_reg & PCIE_CORE_INT_UCR)
> + dev_dbg(pp->dev, "malformed TLP received from the link\n");
> +
> + if (sub_reg & PCIE_CORE_INT_FCE)
> + dev_dbg(pp->dev, "an error was observed in the flow control advertisements from the other side\n");
> +
> + if (sub_reg & PCIE_CORE_INT_CT)
> + dev_dbg(pp->dev, "a request timed out waiting for completion\n");
> +
> + if (sub_reg & PCIE_CORE_INT_UTC)
> + dev_dbg(pp->dev, "unmapped TC error\n");
> +
> + if (sub_reg & PCIE_CORE_INT_MMVC)
> + dev_dbg(pp->dev, "MSI mask register changes\n");
> +
> + pcie_write(pp, sub_reg, PCIE_CORE_INT_STATUS);
> + } else if (reg & PCIE_CLIENT_INT_PHY) {
> + dev_dbg(pp->dev, "phy link changes\n");
> + rockchip_pcie_clr_bw_int(pp);
> + }
> +
> + pcie_write(pp, reg & PCIE_CLIENT_INT_LOCAL, PCIE_CLIENT_INT_STATUS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t rockchip_pcie_client_irq_handler(int irq, void *arg)
> +{
> + struct rockchip_pcie_port *pp = arg;
> + u32 reg;
> +
> + reg = pcie_read(pp, PCIE_CLIENT_INT_STATUS);
> + if (reg & PCIE_CLIENT_INT_LEGACY_DONE)
> + dev_dbg(pp->dev, "legacy done interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_MSG)
> + dev_dbg(pp->dev, "message done interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_HOT_RST)
> + dev_dbg(pp->dev, "hot reset interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_DPA)
> + dev_dbg(pp->dev, "dpa interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_FATAL_ERR)
> + dev_dbg(pp->dev, "fatal error interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_NFATAL_ERR)
> + dev_dbg(pp->dev, "no fatal error interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_CORR_ERR)
> + dev_dbg(pp->dev, "correctable error interrupt received\n");
> +
> + if (reg & PCIE_CLIENT_INT_PHY)
> + dev_dbg(pp->dev, "phy interrupt received\n");
> +
> + pcie_write(pp, reg & (PCIE_CLIENT_INT_LEGACY_DONE |
> + PCIE_CLIENT_INT_MSG | PCIE_CLIENT_INT_HOT_RST |
> + PCIE_CLIENT_INT_DPA | PCIE_CLIENT_INT_FATAL_ERR |
> + PCIE_CLIENT_INT_NFATAL_ERR |
> + PCIE_CLIENT_INT_CORR_ERR),
> + PCIE_CLIENT_INT_STATUS |
> + PCIE_CLIENT_INT_PHY);

As pointed out by Brian, this is buggy. Using defines at the beginning of the
file for complex bit masks would reduce the possibility for this to happen.

The above mask reflects PCIE_CLIENT_INT_CLI minus PCIE_CLIENT_INT_LEGACY.
Coincidental or are some flags missing here ?

> + return IRQ_HANDLED;
> +}
> +
> +static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct rockchip_pcie_port *port;
> + u32 reg;
> + u32 hwirq;
> + u32 virq;
> +
> + chained_irq_enter(chip, desc);
> + port = irq_desc_get_handler_data(desc);
> +
> + reg = pcie_read(port, PCIE_CLIENT_INT_STATUS);
> + reg = (reg & ROCKCHIP_PCIE_RPIFR1_INTR_MASK) >>
> + ROCKCHIP_PCIE_RPIFR1_INTR_SHIFT;
> +
> + while (reg) {
> + hwirq = ffs(reg) - 1;
> + reg &= ~BIT(hwirq);
> +
> + virq = irq_find_mapping(port->irq_domain, hwirq);
> + if (virq)
> + generic_handle_irq(virq);
> + else
> + dev_err(port->dev, "unexpected IRQ, INT%d\n", hwirq);
> + }
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +
> +/**
> + * rockchip_pcie_parse_dt - Parse Device Tree
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int rockchip_pcie_parse_dt(struct rockchip_pcie_port *port)
> +{
> + struct device *dev = port->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> + struct device_node *node = dev->of_node;
> + struct resource *regs;
> + int irq;
> + int err;
> +
> + regs = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM,
> + "axi-base");
> + if (!regs) {
> + dev_err(dev, "missing axi-base property\n");
> + return -ENODEV;
> + }
> +
> + port->reg_base = devm_ioremap_resource(dev, regs);
> + if (IS_ERR(port->reg_base))
> + return PTR_ERR(port->reg_base);
> +
> + regs = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM,
> + "apb-base");
> + if (!regs) {
> + dev_err(dev, "missing apb-base property\n");
> + return -ENODEV;
> + }
> +
> + port->apb_base = devm_ioremap_resource(dev, regs);
> + if (IS_ERR(port->apb_base))
> + return PTR_ERR(port->apb_base);
> +
> + port->phy = devm_phy_get(dev, "pcie-phy");
> + if (IS_ERR(port->phy)) {
> + if (PTR_ERR(port->phy) != -EPROBE_DEFER)
> + dev_err(dev, "missing phy\n");
> + return PTR_ERR(port->phy);
> + }
> +
> + port->lanes = 1;
> + err = of_property_read_u32(node, "num-lanes", &port->lanes);
> + if (!err && ((port->lanes == 0) ||
> + (port->lanes == 3) ||
> + (port->lanes > 4))) {

Unnecesary () around comparisons.

> + dev_warn(dev, "invalid num-lanes, default use one lane\n");

"... default to use ... " might be better.

> + port->lanes = 1;
> + }
> +
> + port->core_rst = devm_reset_control_get(dev, "core");
> + if (IS_ERR(port->core_rst)) {
> + if (PTR_ERR(port->core_rst) != -EPROBE_DEFER)
> + dev_err(dev, "missing core rst property in node\n");

s/rst/reset/ ?

> + return PTR_ERR(port->core_rst);
> + }
> +
> + port->mgmt_rst = devm_reset_control_get(dev, "mgmt");
> + if (IS_ERR(port->mgmt_rst)) {
> + if (PTR_ERR(port->mgmt_rst) != -EPROBE_DEFER)
> + dev_err(dev, "missing mgmt rst property in node\n");
> + return PTR_ERR(port->mgmt_rst);
> + }
> +
> + port->mgmt_sticky_rst = devm_reset_control_get(dev, "mgmt-sticky");
> + if (IS_ERR(port->mgmt_sticky_rst)) {
> + if (PTR_ERR(port->mgmt_sticky_rst) != -EPROBE_DEFER)
> + dev_err(dev, "missing mgmt-sticky rst property in node\n");
> + return PTR_ERR(port->mgmt_sticky_rst);
> + }
> +
> + port->pipe_rst = devm_reset_control_get(dev, "pipe");
> + if (IS_ERR(port->pipe_rst)) {
> + if (PTR_ERR(port->pipe_rst) != -EPROBE_DEFER)
> + dev_err(dev, "missing pipe rst property in node\n");
> + return PTR_ERR(port->pipe_rst);
> + }
> +
> + port->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH);
> + if (IS_ERR(port->ep_gpio)) {
> + dev_err(dev, "missing ep-gpios property in node\n");

May return -EPROBE_DEFER, which should not generate an error message.

> + return PTR_ERR(port->ep_gpio);
> + }
> +
> + port->aclk_pcie = devm_clk_get(dev, "aclk");
> + if (IS_ERR(port->aclk_pcie)) {
> + dev_err(dev, "aclk clock not found\n");

May return -EPROBE_DEFER.

> + return PTR_ERR(port->aclk_pcie);
> + }
> +
> + port->aclk_perf_pcie = devm_clk_get(dev, "aclk-perf");
> + if (IS_ERR(port->aclk_perf_pcie)) {
> + dev_err(dev, "aclk_perf clock not found\n");
> + return PTR_ERR(port->aclk_perf_pcie);
> + }
> +
> + port->hclk_pcie = devm_clk_get(dev, "hclk");
> + if (IS_ERR(port->hclk_pcie)) {
> + dev_err(dev, "hclk clock not found\n");
> + return PTR_ERR(port->hclk_pcie);
> + }
> +
> + port->clk_pcie_pm = devm_clk_get(dev, "pm");
> + if (IS_ERR(port->clk_pcie_pm)) {
> + dev_err(dev, "pm clock not found\n");
> + return PTR_ERR(port->clk_pcie_pm);
> + }
> +
> + irq = platform_get_irq_byname(pdev, "sys");
> + if (irq < 0) {
> + dev_err(dev, "missing sys IRQ resource\n");

May return -EPROBE_DEFER.

> + return -EINVAL;
> + }
> +
> + err = devm_request_irq(dev, irq, rockchip_pcie_subsys_irq_handler,
> + IRQF_SHARED, "pcie-sys", port);
> + if (err) {
> + dev_err(dev, "failed to request pcie subsystem IRQ\n");
> + return err;
> + }
> +
> + irq = platform_get_irq_byname(pdev, "legacy");
> + if (irq < 0) {
> + dev_err(dev, "missing legacy IRQ resource\n");
> + return -EINVAL;
> + }
> +
> + irq_set_chained_handler_and_data(irq,
> + rockchip_pcie_legacy_int_handler,
> + port);
> +
> + irq = platform_get_irq_byname(pdev, "client");
> + if (irq < 0) {
> + dev_err(dev, "missing client IRQ resource\n");
> + return -EINVAL;
> + }
> +
> + err = devm_request_irq(dev, irq, rockchip_pcie_client_irq_handler,
> + IRQF_SHARED, "pcie-client", port);
> + if (err) {
> + dev_err(dev, "failed to request PCIe client IRQ\n");
> + return err;
> + }
> +
> + port->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
> + if (IS_ERR(port->vpcie3v3)) {
> + if (PTR_ERR(port->vpcie3v3) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_info(dev, "no vpcie3v3 regulator found\n");
> + }
> +
> + port->vpcie1v8 = devm_regulator_get_optional(dev, "vpcie1v8");
> + if (IS_ERR(port->vpcie1v8)) {
> + if (PTR_ERR(port->vpcie1v8) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_info(dev, "no vpcie1v8 regulator found\n");
> + }
> +
> + port->vpcie0v9 = devm_regulator_get_optional(dev, "vpcie0v9");
> + if (IS_ERR(port->vpcie0v9)) {
> + if (PTR_ERR(port->vpcie0v9) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_info(dev, "no vpcie0v9 regulator found\n");
> + }
> +
> + return 0;
> +}
> +
> +static int rockchip_pcie_set_vpcie(struct rockchip_pcie_port *port)
> +{
> + int err;
> +
> + if (!IS_ERR(port->vpcie3v3)) {
> + err = regulator_enable(port->vpcie3v3);
> + if (err) {
> + dev_err(port->dev, "fail to enable vpcie3v3 regulator.\n");
> + goto err_out;
> + }
> + }
> +
> + if (!IS_ERR(port->vpcie1v8)) {
> + err = regulator_enable(port->vpcie1v8);
> + if (err) {
> + dev_err(port->dev, "fail to enable vpcie1v8 regulator.\n");
> + goto err_disable_3v3;
> + }
> + }
> +
> + if (!IS_ERR(port->vpcie0v9)) {
> + err = regulator_enable(port->vpcie0v9);
> + if (err) {
> + dev_err(port->dev, "fail to enable vpcie0v9 regulator.\n");
> + goto err_disable_1v8;
> + }
> + }
> +
> + return 0;
> +
> +err_disable_1v8:
> + if (!IS_ERR(port->vpcie1v8))
> + regulator_disable(port->vpcie1v8);
> +err_disable_3v3:
> + if (!IS_ERR(port->vpcie3v3))
> + regulator_disable(port->vpcie3v3);
> +err_out:
> + return err;
> +}
> +
> +static void rockchip_pcie_enable_interrupts(struct rockchip_pcie_port *port)
> +{
> + pcie_write(port, (PCIE_CLIENT_INT_CLI << 16) &
> + (~PCIE_CLIENT_INT_CLI), PCIE_CLIENT_INT_MASK);

Unnecessary ( ) around ~PCIE_CLIENT_INT_CLI

> + pcie_write(port, (u32)(~PCIE_CORE_INT), PCIE_CORE_INT_MASK);

Typecast should be unnecessary here.

> +
> + rockchip_pcie_enable_bw_int(port);
> +}
> +
> +static int rockchip_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> + irq_set_chip_data(irq, domain->host_data);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops intx_domain_ops = {
> + .map = rockchip_pcie_intx_map,
> +};
> +
> +static int rockchip_pcie_init_irq_domain(struct rockchip_pcie_port *pp)
> +{
> + struct device *dev = pp->dev;
> + struct device_node *intc = of_get_next_child(dev->of_node, NULL);
> +
> + if (!intc) {
> + dev_err(dev, "missing child interrupt-controller node\n");
> + return -EINVAL;
> + }
> +
> + pp->irq_domain = irq_domain_add_linear(intc, 4, &intx_domain_ops, pp);
> + if (!pp->irq_domain) {
> + dev_err(dev, "mailed to get a INTx IRQ domain\n");

s/mailed/failed/

> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int rockchip_pcie_prog_ob_atu(struct rockchip_pcie_port *pp,
> + int region_no,
> + int type, u8 num_pass_bits,
> + u32 lower_addr, u32 upper_addr)
> +{
> + u32 ob_addr_0;
> + u32 ob_addr_1;
> + u32 ob_desc_0;
> + void __iomem *aw_base;
> +
> + if (region_no >= MAX_AXI_WRAPPER_REGION_NUM)
> + return -EINVAL;
> + if ((num_pass_bits + 1) < 8)

Unnecessary ( ).

> + return -EINVAL;
> + if (num_pass_bits > 63)
> + return -EINVAL;
> + if (region_no == 0) {
> + if (AXI_REGION_0_SIZE < (2ULL << num_pass_bits))
> + return -EINVAL;
> + }
> + if (region_no != 0) {
> + if (AXI_REGION_SIZE < (2ULL << num_pass_bits))
> + return -EINVAL;
> + }
> +
> + aw_base = pp->apb_base + PCIE_CORE_AXI_CONF_BASE;
> + aw_base += (region_no << OB_REG_SIZE_SHIFT);
> +
> + ob_addr_0 = num_pass_bits & PCIE_CORE_OB_REGION_ADDR0_NUM_BITS;
> + ob_addr_0 |= lower_addr & PCIE_CORE_OB_REGION_ADDR0_LO_ADDR;
> + ob_addr_1 = upper_addr;
> + ob_desc_0 = (1 << 23 | type);
> +
> + writel(ob_addr_0, aw_base);
> + writel(ob_addr_1, aw_base + PCIE_CORE_OB_REGION_ADDR1);
> + writel(ob_desc_0, aw_base + PCIE_CORE_OB_REGION_DESC0);
> + writel(0, aw_base + PCIE_CORE_OB_REGION_DESC1);
> +
> + return 0;
> +}
> +
> +static int rockchip_pcie_prog_ib_atu(struct rockchip_pcie_port *pp,
> + int region_no,
> + u8 num_pass_bits,
> + u32 lower_addr,
> + u32 upper_addr)
> +{
> + u32 ib_addr_0;
> + u32 ib_addr_1;
> + void __iomem *aw_base;
> +
> + if (region_no > MAX_AXI_IB_ROOTPORT_REGION_NUM)
> + return -EINVAL;
> + if ((num_pass_bits + 1) < MIN_AXI_ADDR_BITS_PASSED)

Unnecessary ( ).

> + return -EINVAL;
> + if (num_pass_bits > 63)
> + return -EINVAL;
> +
> + aw_base = pp->apb_base + PCIE_CORE_AXI_INBOUND_BASE;
> + aw_base += (region_no << IB_ROOT_PORT_REG_SIZE_SHIFT);
> +
> + ib_addr_0 = num_pass_bits & PCIE_CORE_IB_REGION_ADDR0_NUM_BITS;
> + ib_addr_0 |= (lower_addr << 8) & PCIE_CORE_IB_REGION_ADDR0_LO_ADDR;
> + ib_addr_1 = upper_addr;
> +
> + writel(ib_addr_0, aw_base);
> + writel(ib_addr_1, aw_base + PCIE_RP_IB_ADDR_TRANS);
> +
> + return 0;
> +}
> +
> +static int rockchip_pcie_probe(struct platform_device *pdev)
> +{
> + struct rockchip_pcie_port *port;
> + struct device *dev = &pdev->dev;
> + struct pci_bus *bus, *child;
> + struct resource_entry *win;
> + resource_size_t io_base;
> + struct resource *busn = NULL;
> + struct resource *mem;
> + struct resource *io;
> + phys_addr_t io_bus_addr = 0;
> + u32 io_size;
> + phys_addr_t mem_bus_addr = 0;
> + u32 mem_size = 0;
> + int reg_no;
> + int err;
> + int offset;
> +
> + LIST_HEAD(res);
> +
> + if (!dev->of_node)
> + return -ENODEV;
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + port->dev = dev;
> +
> + err = rockchip_pcie_parse_dt(port);
> + if (err)
> + return err;
> +
> + err = clk_prepare_enable(port->aclk_pcie);
> + if (err) {
> + dev_err(dev, "unable to enable aclk_pcie clock.\n");
> + goto err_aclk_pcie;
> + }
> +
> + err = clk_prepare_enable(port->aclk_perf_pcie);
> + if (err) {
> + dev_err(dev, "unable to enable aclk_perf_pcie clock.\n");
> + goto err_aclk_perf_pcie;
> + }
> +
> + err = clk_prepare_enable(port->hclk_pcie);
> + if (err) {
> + dev_err(dev, "unable to enable hclk_pcie clock.\n");
> + goto err_hclk_pcie;
> + }
> +
> + err = clk_prepare_enable(port->clk_pcie_pm);
> + if (err) {
> + dev_err(dev, "unable to enable hclk_pcie clock.\n");
> + goto err_pcie_pm;
> + }
> +
> + err = rockchip_pcie_set_vpcie(port);
> + if (err) {
> + dev_err(port->dev, "fail to set vpcie regulator.\n");
> + goto err_set_vpcie;
> + }
> +
> + err = rockchip_pcie_init_port(port);
> + if (err)
> + goto err_vpcie;
> +
> + platform_set_drvdata(pdev, port);
> +
> + rockchip_pcie_enable_interrupts(port);
> +

There is no matching disable_interrupts call in error handling after this.
Is that ok ?

Also, is it ok to enable interrupts this early (before the rest of the
initialization is complete) ?

> + err = rockchip_pcie_init_irq_domain(port);
> + if (err < 0)
> + goto err_vpcie;
> +
> + err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
> + &res, &io_base);
> + if (err)
> + goto err_vpcie;
> +
> + err = devm_request_pci_bus_resources(dev, &res);
> + if (err)
> + goto err_vpcie;
> +
> + /* Get the I/O and memory ranges from DT */
> + resource_list_for_each_entry(win, &res) {
> + switch (resource_type(win->res)) {
> + case IORESOURCE_IO:
> + io = win->res;
> + io->name = "I/O";
> + io_size = resource_size(io);
> + io_bus_addr = io->start - win->offset;
> + err = pci_remap_iospace(io, io_base);
> + if (err) {
> + dev_warn(port->dev, "error %d: failed to map resource %pR\n",
> + err, io);
> + continue;
> + }
> + break;
> + case IORESOURCE_MEM:
> + mem = win->res;
> + mem->name = "MEM";
> + mem_size = resource_size(mem);
> + mem_bus_addr = mem->start - win->offset;
> + break;
> + case IORESOURCE_BUS:
> + busn = win->res;
> + break;
> + default:
> + continue;
> + }
> + }
> +
> + if (mem_size)

While strictly speaking not needed, I would recommend { }
here to improve readability.

> + for (reg_no = 0; reg_no < (mem_size >> 20); reg_no++) {

This doesn't support mem sizes smaller than 1 << 20 (and clips the size
if it is not aligned to 1M). Is this intentional ?

> + err = rockchip_pcie_prog_ob_atu(port, reg_no + 1,
> + AXI_WRAPPER_MEM_WRITE,
> + 20 - 1,
> + mem_bus_addr +
> + (reg_no << 20),
> + 0);
> + if (err) {
> + dev_err(dev, "program RC mem outbound ATU failed\n");
> + goto err_vpcie;
> + }
> + }
> +
> + err = rockchip_pcie_prog_ib_atu(port, 2, 32 - 1, 0x0, 0);
> + if (err) {
> + dev_err(dev, "program RC mem inbound ATU failed\n");
> + goto err_vpcie;
> + }
> +
> + offset = mem_size >> 20;
> +
> + if (io_size)

While strictly speaking not needed, I would recommend { }
here to improve readability.

> + for (reg_no = 0; reg_no < (io_size >> 20); reg_no++) {

This effectively doesn't support io sizes smaller than 1 << 20. Is this
intentional ?

> + err = rockchip_pcie_prog_ob_atu(port,
> + reg_no + 1 + offset,
> + AXI_WRAPPER_IO_WRITE,
> + 20 - 1,
> + io_bus_addr +
> + (reg_no << 20),
> + 0);
> + if (err) {
> + dev_err(dev, "program RC io outbound ATU failed\n");
> + goto err_vpcie;
> + }
> + }
> +
> + if (busn)
> + port->root_bus_nr = busn->start;

Why not set root_bus_nr directly above, where busn is assigned ?
This would save the need for the busn variable.

> +
> + bus = pci_scan_root_bus(&pdev->dev, 0, &rockchip_pcie_ops, port, &res);
> +
Unnecessary empty line

> + if (!bus) {
> + err = -ENOMEM;
> + goto err_vpcie;
> + }
> +
> + pci_bus_size_bridges(bus);
> + pci_bus_assign_resources(bus);
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);
> +
> + pci_bus_add_devices(bus);
> +
> + dev_warn(dev, "only 32-bit config accesses supported; smaller writes may corrupt adjacent RW1C fields\n");
> +

A warning which is always displayed seems to be a bit useless. If this is a
concern, maybe the driver should provide its own config space access functions
and map smaller accesses into 32 bit accesses. But isn't that already done ?

> + return err;
> +
> +err_vpcie:
> + if (!IS_ERR(port->vpcie3v3))
> + regulator_disable(port->vpcie3v3);
> + if (!IS_ERR(port->vpcie1v8))
> + regulator_disable(port->vpcie1v8);
> + if (!IS_ERR(port->vpcie0v9))
> + regulator_disable(port->vpcie0v9);
> +err_set_vpcie:
> + clk_disable_unprepare(port->clk_pcie_pm);
> +err_pcie_pm:
> + clk_disable_unprepare(port->hclk_pcie);
> +err_hclk_pcie:
> + clk_disable_unprepare(port->aclk_perf_pcie);
> +err_aclk_perf_pcie:
> + clk_disable_unprepare(port->aclk_pcie);
> +err_aclk_pcie:
> + return err;
> +}
> +
> +static const struct of_device_id rockchip_pcie_of_match[] = {
> + { .compatible = "rockchip,rk3399-pcie", },
> + {}
> +};
> +
> +static struct platform_driver rockchip_pcie_driver = {
> + .driver = {
> + .name = "rockchip-pcie",
> + .of_match_table = rockchip_pcie_of_match,
> + },
> + .probe = rockchip_pcie_probe,
> +
> +};
> +builtin_platform_driver(rockchip_pcie_driver);

Next message: Alan Stern: "Re: [PATCH V4] leds: trigger: Introduce an USB port trigger"
Previous message: KY Srinivasan: "RE: [PATCH 1/2] Drivers: hv: utils: Continue to poll VSS channel after handling requests."
Next in thread: Shawn Lin: "Re: [v10,2/2] PCI: Rockchip: Add Rockchip PCIe controller support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]