[PATCH v3 1/2] wcn36xx: Transition driver to SMD client

From: Bjorn Andersson
Date: Thu Sep 01 2016 - 10:51:46 EST

Next message: Lee Jones: "Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree"
Previous message: Bjorn Andersson: "[PATCH v3 2/2] wcn36xx: Implement firmware assisted scan"
Next in thread: Bjorn Andersson: "[PATCH v3 2/2] wcn36xx: Implement firmware assisted scan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The wcn36xx wifi driver follows the life cycle of the WLAN_CTRL SMD
channel, as such it should be a SMD client. This patch makes this
transition, now that we have the necessary frameworks available.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v2:
- Correct the call to the new ieee80211_scan_completed()

drivers/net/wireless/ath/wcn36xx/Kconfig | 2 +-
drivers/net/wireless/ath/wcn36xx/dxe.c | 16 +++---
drivers/net/wireless/ath/wcn36xx/main.c | 79 ++++++++++++++++++++----------
drivers/net/wireless/ath/wcn36xx/smd.c | 29 +++++------
drivers/net/wireless/ath/wcn36xx/smd.h | 5 ++
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 21 +++-----
6 files changed, 86 insertions(+), 66 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
index 591ebaea8265..394fe5b77c90 100644
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
@@ -1,6 +1,6 @@
config WCN36XX
tristate "Qualcomm Atheros WCN3660/3680 support"
- depends on MAC80211 && HAS_DMA
+ depends on MAC80211 && HAS_DMA && QCOM_SMD
---help---
This module adds support for wireless adapters based on
Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 231fd022f0f5..87dfdaf9044c 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -23,6 +23,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/interrupt.h>
+#include <linux/soc/qcom/smem_state.h>
#include "wcn36xx.h"
#include "txrx.h"

@@ -151,9 +152,12 @@ int wcn36xx_dxe_alloc_ctl_blks(struct wcn36xx *wcn)
goto out_err;

/* Initialize SMSM state Clear TX Enable RING EMPTY STATE */
- ret = wcn->ctrl_ops->smsm_change_state(
- WCN36XX_SMSM_WLAN_TX_ENABLE,
- WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
+ ret = qcom_smem_state_update_bits(wcn->tx_enable_state,
+ WCN36XX_SMSM_WLAN_TX_ENABLE |
+ WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY,
+ WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY);
+ if (ret)
+ goto out_err;

return 0;

@@ -678,9 +682,9 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
* notify chip about new frame through SMSM bus.
*/
if (is_low && vif_priv->pw_state == WCN36XX_BMPS) {
- wcn->ctrl_ops->smsm_change_state(
- 0,
- WCN36XX_SMSM_WLAN_TX_ENABLE);
+ qcom_smem_state_update_bits(wcn->tx_rings_empty_state,
+ WCN36XX_SMSM_WLAN_TX_ENABLE,
+ WCN36XX_SMSM_WLAN_TX_ENABLE);
} else {
/* indicate End Of Packet and generate interrupt on descriptor
* done.
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e1d59da2ad20..3c2522b07c90 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -21,6 +21,10 @@
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/soc/qcom/smd.h>
+#include <linux/soc/qcom/smem_state.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
#include "wcn36xx.h"

unsigned int wcn36xx_dbg_mask;
@@ -1058,8 +1062,7 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
int ret;

/* Set TX IRQ */
- res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- "wcnss_wlantx_irq");
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "tx");
if (!res) {
wcn36xx_err("failed to get tx_irq\n");
return -ENOENT;
@@ -1067,14 +1070,29 @@ static int wcn36xx_platform_get_resources(struct wcn36xx *wcn,
wcn->tx_irq = res->start;

/* Set RX IRQ */
- res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- "wcnss_wlanrx_irq");
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "rx");
if (!res) {
wcn36xx_err("failed to get rx_irq\n");
return -ENOENT;
}
wcn->rx_irq = res->start;

+ /* Acquire SMSM tx enable handle */
+ wcn->tx_enable_state = qcom_smem_state_get(&pdev->dev,
+ "tx-enable", &wcn->tx_enable_state_bit);
+ if (IS_ERR(wcn->tx_enable_state)) {
+ wcn36xx_err("failed to get tx-enable state\n");
+ return PTR_ERR(wcn->tx_enable_state);
+ }
+
+ /* Acquire SMSM tx rings empty handle */
+ wcn->tx_rings_empty_state = qcom_smem_state_get(&pdev->dev,
+ "tx-rings-empty", &wcn->tx_rings_empty_state_bit);
+ if (IS_ERR(wcn->tx_rings_empty_state)) {
+ wcn36xx_err("failed to get tx-rings-empty state\n");
+ return PTR_ERR(wcn->tx_rings_empty_state);
+ }
+
mmio_node = of_parse_phandle(pdev->dev.parent->of_node, "qcom,mmio", 0);
if (!mmio_node) {
wcn36xx_err("failed to acquire qcom,mmio reference\n");
@@ -1115,11 +1133,14 @@ static int wcn36xx_probe(struct platform_device *pdev)
{
struct ieee80211_hw *hw;
struct wcn36xx *wcn;
+ void *wcnss;
int ret;
- u8 addr[ETH_ALEN];
+ const u8 *addr;

wcn36xx_dbg(WCN36XX_DBG_MAC, "platform probe\n");

+ wcnss = dev_get_drvdata(pdev->dev.parent);
+
hw = ieee80211_alloc_hw(sizeof(struct wcn36xx), &wcn36xx_ops);
if (!hw) {
wcn36xx_err("failed to alloc hw\n");
@@ -1130,11 +1151,23 @@ static int wcn36xx_probe(struct platform_device *pdev)
wcn = hw->priv;
wcn->hw = hw;
wcn->dev = &pdev->dev;
- wcn->ctrl_ops = pdev->dev.platform_data;
-
mutex_init(&wcn->hal_mutex);

- if (!wcn->ctrl_ops->get_hw_mac(addr)) {
+ wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process);
+ if (IS_ERR(wcn->smd_channel)) {
+ wcn36xx_err("failed to open WLAN_CTRL channel\n");
+ ret = PTR_ERR(wcn->smd_channel);
+ goto out_wq;
+ }
+
+ qcom_smd_set_drvdata(wcn->smd_channel, hw);
+
+ addr = of_get_property(pdev->dev.of_node, "local-mac-address", &ret);
+ if (addr && ret != ETH_ALEN) {
+ wcn36xx_err("invalid local-mac-address\n");
+ ret = -EINVAL;
+ goto out_wq;
+ } else if (addr) {
wcn36xx_info("mac address: %pM\n", addr);
SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
}
@@ -1158,6 +1191,7 @@ out_wq:
out_err:
return ret;
}
+
static int wcn36xx_remove(struct platform_device *pdev)
{
struct ieee80211_hw *hw = platform_get_drvdata(pdev);
@@ -1168,42 +1202,33 @@ static int wcn36xx_remove(struct platform_device *pdev)
mutex_destroy(&wcn->hal_mutex);

ieee80211_unregister_hw(hw);
+
+ qcom_smem_state_put(wcn->tx_enable_state);
+ qcom_smem_state_put(wcn->tx_rings_empty_state);
+
iounmap(wcn->dxe_base);
iounmap(wcn->ccu_base);
ieee80211_free_hw(hw);

return 0;
}
-static const struct platform_device_id wcn36xx_platform_id_table[] = {
- {
- .name = "wcn36xx",
- .driver_data = 0
- },
+
+static const struct of_device_id wcn36xx_of_match[] = {
+ { .compatible = "qcom,wcnss-wlan" },
{}
};
-MODULE_DEVICE_TABLE(platform, wcn36xx_platform_id_table);
+MODULE_DEVICE_TABLE(of, wcn36xx_of_match);

static struct platform_driver wcn36xx_driver = {
.probe = wcn36xx_probe,
.remove = wcn36xx_remove,
.driver = {
.name = "wcn36xx",
+ .of_match_table = wcn36xx_of_match,
},
- .id_table = wcn36xx_platform_id_table,
};

-static int __init wcn36xx_init(void)
-{
- platform_driver_register(&wcn36xx_driver);
- return 0;
-}
-module_init(wcn36xx_init);
-
-static void __exit wcn36xx_exit(void)
-{
- platform_driver_unregister(&wcn36xx_driver);
-}
-module_exit(wcn36xx_exit);
+module_platform_driver(wcn36xx_driver);

MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Eugene Krasnikov k.eugene.e@xxxxxxxxx");
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index a443992320f2..d9ff2e2a8118 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -19,6 +19,7 @@
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/bitops.h>
+#include <linux/soc/qcom/smd.h>
#include "smd.h"

struct wcn36xx_cfg_val {
@@ -253,7 +254,7 @@ static int wcn36xx_smd_send_and_wait(struct wcn36xx *wcn, size_t len)

init_completion(&wcn->hal_rsp_compl);
start = jiffies;
- ret = wcn->ctrl_ops->tx(wcn->hal_buf, len);
+ ret = qcom_smd_send(wcn->smd_channel, wcn->hal_buf, len);
if (ret) {
wcn36xx_err("HAL TX failed\n");
goto out;
@@ -2180,9 +2181,12 @@ out:
return ret;
}

-static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
+int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
+ const void *buf, size_t len)
{
struct wcn36xx_hal_msg_header *msg_header = buf;
+ struct ieee80211_hw *hw = qcom_smd_get_drvdata(channel);
+ struct wcn36xx *wcn = hw->priv;
struct wcn36xx_hal_ind_msg *msg_ind;
wcn36xx_dbg_dump(WCN36XX_DBG_SMD_DUMP, "SMD <<< ", buf, len);

@@ -2233,15 +2237,11 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
case WCN36XX_HAL_OTA_TX_COMPL_IND:
case WCN36XX_HAL_MISSED_BEACON_IND:
case WCN36XX_HAL_DELETE_STA_CONTEXT_IND:
- msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_KERNEL);
+ msg_ind = kmalloc(sizeof(*msg_ind) + len, GFP_ATOMIC);
if (!msg_ind) {
- /*
- * FIXME: Do something smarter then just
- * printing an error.
- */
wcn36xx_err("Run out of memory while handling SMD_EVENT (%d)\n",
msg_header->msg_type);
- break;
+ return -ENOMEM;
}

msg_ind->msg_len = len;
@@ -2257,6 +2257,8 @@ static void wcn36xx_smd_rsp_process(struct wcn36xx *wcn, void *buf, size_t len)
wcn36xx_err("SMD_EVENT (%d) not supported\n",
msg_header->msg_type);
}
+
+ return 0;
}
static void wcn36xx_ind_smd_work(struct work_struct *work)
{
@@ -2315,22 +2317,13 @@ int wcn36xx_smd_open(struct wcn36xx *wcn)
INIT_LIST_HEAD(&wcn->hal_ind_queue);
spin_lock_init(&wcn->hal_ind_lock);

- ret = wcn->ctrl_ops->open(wcn, wcn36xx_smd_rsp_process);
- if (ret) {
- wcn36xx_err("failed to open control channel\n");
- goto free_wq;
- }
-
- return ret;
+ return 0;

-free_wq:
- destroy_workqueue(wcn->hal_ind_wq);
out:
return ret;
}

void wcn36xx_smd_close(struct wcn36xx *wcn)
{
- wcn->ctrl_ops->close();
destroy_workqueue(wcn->hal_ind_wq);
}
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index df80cbbd9d1b..40d829563c2b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -51,6 +51,7 @@ struct wcn36xx_hal_ind_msg {
};

struct wcn36xx;
+struct qcom_smd_channel;

int wcn36xx_smd_open(struct wcn36xx *wcn);
void wcn36xx_smd_close(struct wcn36xx *wcn);
@@ -127,6 +128,10 @@ int wcn36xx_smd_del_ba(struct wcn36xx *wcn, u16 tid, u8 sta_index);
int wcn36xx_smd_trigger_ba(struct wcn36xx *wcn, u8 sta_index);

int wcn36xx_smd_update_cfg(struct wcn36xx *wcn, u32 cfg_id, u32 value);
+
+int wcn36xx_smd_rsp_process(struct qcom_smd_channel *channel,
+ const void *buf, size_t len);
+
int wcn36xx_smd_set_mc_list(struct wcn36xx *wcn,
struct ieee80211_vif *vif,
struct wcn36xx_hal_rcv_flt_mc_addr_list_type *fp);
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 22242d18e1fe..68cc06cf9bc0 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -103,19 +103,6 @@ struct nv_data {
u8 table;
};

-/* Interface for platform control path
- *
- * @open: hook must be called when wcn36xx wants to open control channel.
- * @tx: sends a buffer.
- */
-struct wcn36xx_platform_ctrl_ops {
- int (*open)(void *drv_priv, void *rsp_cb);
- void (*close)(void);
- int (*tx)(char *buf, size_t len);
- int (*get_hw_mac)(u8 *addr);
- int (*smsm_change_state)(u32 clear_mask, u32 set_mask);
-};
-
/**
* struct wcn36xx_vif - holds VIF related fields
*
@@ -205,7 +192,13 @@ struct wcn36xx {
void __iomem *ccu_base;
void __iomem *dxe_base;

- struct wcn36xx_platform_ctrl_ops *ctrl_ops;
+ struct qcom_smd_channel *smd_channel;
+
+ struct qcom_smem_state *tx_enable_state;
+ unsigned tx_enable_state_bit;
+ struct qcom_smem_state *tx_rings_empty_state;
+ unsigned tx_rings_empty_state_bit;
+
/*
* smd_buf must be protected with smd_mutex to garantee
* that all messages are sent one after another
--
2.5.0

Next message: Lee Jones: "Re: Applied "mfd: tps65218: add version check to the PMIC probe" to the regulator tree"
Previous message: Bjorn Andersson: "[PATCH v3 2/2] wcn36xx: Implement firmware assisted scan"
Next in thread: Bjorn Andersson: "[PATCH v3 2/2] wcn36xx: Implement firmware assisted scan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]