Re: e1000e on Thinkpad x60: gigabit not available due to "SmartSpeed"

From: Lennart Sorensen
Date: Fri Sep 02 2016 - 12:57:42 EST


On Thu, Sep 01, 2016 at 02:58:13PM -0700, Greg wrote:
> On Thu, 2016-09-01 at 22:14 +0200, Pavel Machek wrote:
> > Hi!
> >
> > I have trouble getting 1000mbit out of my ethernet card.
> >
> > I tried direct connection between two PCs with different cables, and
> > no luck.
> >
> > Today I tried connection to 1000mbit switch, and no luck, either. (Two
> > cables, one was cat6, both short).
> >
> > My computer sees 1000mbit being advertised by the other side, but does
> > not advertise 1000mbit, "Link Speed was downgraded by SmartSpeed".
>
> Check your cables?
>
> https://vmxp.wordpress.com/2015/01/06/1gbe-intel-nic-throttled-to-100mbit-by-smartspeed/

Of course if it isn't the cable, then it could even be a broken pin in
the port. As far as I can tell, anything that causes one of the 3rd
or 4th pairs of wires to not work will degrade to 100Mbit on just the
first 2 pairs of wires and give that message. Some badly implemented
switches can also cause it of course.

--
Len Sorensen