Re: [PATCH v2 3/7] pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank

[Chanwoo Choi]

Hi Tomasz,

I'm sorry for late reply.

On 2016ë 08ì 25ì 23:41, Tomasz Figa wrote:
> 2016-08-25 23:30 GMT+09:00 Tomasz Figa <tomasz.figa@xxxxxxxxx>:
>>> +       }
>>> +
>>> +#define EXYNOS_PIN_BANK_EINTN_EXT(pins, reg, id, pctl_idx, eint_idx)   \
>>> +       {                                               \
>>> +               .type           = &bank_type_off,       \
>>> +               .pctl_offset    = reg,                  \
>>> +               .nr_pins        = pins,                 \
>>> +               .eint_type      = EINT_TYPE_NONE,       \
>>> +               .name           = id,                   \
>>> +               .pctl_res_idx   = pctl_idx,             \
>>> +               .eint_res_idx   = eint_dix              \
>>> +       }
>>
>> Your patch 4/7 doesn't seem to use this one, so this is dead code for
>> the time being. Please add when there is real need for it.
>>
>> Also it doesn't really make much sense to have index for both pctl and
>> eint. Please define first entry of regs property as always pointing to
>> pctl registers and by also eint registers for usual controllers. Then
>> second regs entry would be eint registers for controllers with
>> separate register blocks. Then there is only a need to have
>> eint_res_idx in the driver and no need for pctl_res_idx, because it
>> would be always 0.
> 
> Ah, sorry, I got confused again by which registers are where in these
> GPF banks. Let's make it the other way around and make DT contain eint
> registers in first regs entry and hardcode eint_res_idx to 0 for the
> time being.

I got with slight confusion.
Do you mean that you want to remove the 'eint_res_idx' because
it is always zero(0) as your comment. And do you agree to add 'pctl_res_idx'?

Also, as you commented, the eint_res_idx for both GPA and GPFx is zero(0).

Example:
	pinctrl_alive: pinctrl@10580000 {
		compatible = "samsung,exynos5433-pinctrl";
                      /* ALIVE domain    ,  IMEM domain  */
		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;

		wakeup-interrupt-controller {
			compatible = "samsung,exynos7-wakeup-eint";
			interrupts = <GIC_SPI 16 0>;
		};
	};

	GPA's eint_res_idx is 0
	GPA's pctl_res_idx is 0

	GPFx's eint_res_idx is 0
	GPFx's pctl_res_idx is 1


 However it should be still beneficial to refactor the code
> and calculate per-bank eint_base to avoid adding the offset every
> time, similarly to pctl_base/offset, from my suggestion below.

I agree. I'll modify it according to your comment.

> 
>>> @@ -345,7 +346,8 @@ static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
>>>                         ((b->pin_base + b->nr_pins - 1) < pin))
>>>                 b++;
>>>
>>> -       *reg = drvdata->virt_base + b->pctl_offset;
>>> +       pctl_res_idx = b->pctl_res_idx;
>>> +       *reg = drvdata->virt_base[pctl_res_idx] + b->pctl_offset;
>>
>> I suggested something slightly different. Instead of
>> bank::pctl_res_idx, I proposed bank::pctl_base.
>> bank_info::pctl_res_idx would be specified only in init driver data
>> and bank::pctl_base would be calculated at probe time as
>> drvdata->virt_base[bank_info->pctl_res_idx] + bank_info->pctl_offset.
>> This would eliminate the need to do any indexing and adding further in
>> the code and make things simpler.
>>
>> Taking my other comments above, pctl part would be unchanged and only
>> eint addresses and offsets would be affected.
> 
> Ah, scratch this one sentence. I got confused with the register layout
> again, sorry. Please refactor both eint and pctl as I suggested in the
> upper paragraph.
> 
> Best regards,
> Tomasz
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 

-- 
Best Regards,
Chanwoo Choi