RE: [patch v3] leds: add driver for Mellanox systems leds

From: Vadim Pasternak
Date: Wed Sep 07 2016 - 20:50:59 EST

Next message: Julia Lawall: "[PATCH] ASoC: constify snd_pcm_ops structures"
Previous message: Srinivas Pandruvada: "Re: [RFC/RFT][PATCH 0/4] cpufreq / sched: iowait boost in intel_pstate and schedutil"
In reply to: Jacek Anaszewski: "Re: [patch v3] leds: add driver for Mellanox systems leds"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Jacek,

Thank you very much for review.

> -----Original Message-----
> From: Jacek Anaszewski [mailto:jacek.anaszewski@xxxxxxxxx]
> Sent: Wednesday, September 07, 2016 11:21 PM
> To: Vadim Pasternak <vadimp@xxxxxxxxxxxx>; rpurdie@xxxxxxxxx;
> j.anaszewski@xxxxxxxxxxx
> Cc: dave@xxxxxxxxxxx; linux-leds@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> jiri@xxxxxxxxxxx; Michael Shych <michaelsh@xxxxxxxxxxxx>
> Subject: Re: [patch v3] leds: add driver for Mellanox systems leds
>
> Hi Vadim,
>
> Thanks for the update. Please refer to my comments in the code.
>
> On 09/07/2016 06:42 PM, vadimp@xxxxxxxxxxxx wrote:
> > From: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> >
> > This makes it possible to create a set of LEDs for Mellanox systems:
> > "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
> > "msb7800", "msn2740", "msn2100".
> >
> > Driver obtains led devices according to system configuration, provided
>
> My previous remark is still valid:
>
> s/led/LED/ here and in case of all other occurrences in the in-driver comments
>
> > through system DMI data, like fan1:green, fan1:red and creates devices
> > in
> > form: "devicename:colour:function".
>
> The "devicename" segment is still missing in the entries in
> mlxcpld_led_default_profile and mlxcpld_led_msn2100_profile.
>
> >
> > led setting is controlled through on board CPLD Lattice device.
>
> s/led/LED/
>
> > For setting particular led off, solid, blink (blink requires
> > ledtrig-timer module):
>
> This is not true in case of frequencies supported by the hardware.
>
> > echo 0 > /sys/class/leds/status\:green/brightness
>
> Please remember to add devicename segment also in these examples, while
> submitting the updated patch.

In this example "status" is in role of device name.
On panel systems have "psu#", "fan#", "uid", and "status" LEDs.
Where "status" should indicate whole system health.

>
> > echo 1 > /sys/class/leds/status\:green/brightness
> > echo timer > /sys/class/leds/status\:green/trigger
> >
> > On module probing all leds are set green, on removing - off.
> >
> > Last setting overwrites previous, f.e. sequence for changing led from
> > green - red - green:
> > echo 1 > /sys/class/leds/psu\:green/brightness
> > echo 1 > /sys/class/leds/psu\:red/brightness
> > echo 1 > /sys/class/leds/psu\:green/brightness
> > Note: leds cannot be turned on/off simultaneously.
> >
> > The Kconfig currently controlling compilation of this code is:
> > drivers/leds/Kconfig:config LEDS_MLXCPLD
> >
> > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> > Reviewed-by: Jiri Pirko <jiri@xxxxxxxxxxxx>
> > ---
> > v2->v3:
> > Fixes issues pointed out by Dave:
> > - fix in comments 3KHz and 6KHz to 3Hz and 6Hz respectively;
> > ---
> > v1->v2:
> > Fixes issues pointed out by Jacek:
> > - fix style in patch cover text;
> > - add doc file with hw description;
> > - arrange include directives in alphabetical order;
> > - make defines more clear;
> > - fix several comments for structure descriptions;
> > - add several empty lines between defentions;
> > - change max_brightness profile setting to 1 instead of LED_FULL;
> > - use capital letters for the enumerator;
> > - change in if (product == NULL) to (!product);
> > - add comments to mlxcpld_led_store_hw;
> > - remove switch statement from mlxcpld_led_brightness;
> > - modify mlxcpld_led_blink;
> > - remove unnecessary devm_kfree in mlxcpld_led_config;
> > - remove switch statement from mlxcpld_led_config;
> > - remove platform_get_drvdata from mlxcpld_led_probe;
> > ---
> > Documentation/leds/leds-mlxcpld.txt | 88 ++++++++
> > MAINTAINERS | 8 +
> > drivers/leds/Kconfig | 8 +
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-mlxcpld.c | 399
> ++++++++++++++++++++++++++++++++++++
> > 5 files changed, 504 insertions(+)
> > create mode 100644 Documentation/leds/leds-mlxcpld.txt
> > create mode 100644 drivers/leds/leds-mlxcpld.c
> >
> > diff --git a/Documentation/leds/leds-mlxcpld.txt
> > b/Documentation/leds/leds-mlxcpld.txt
> > new file mode 100644
> > index 0000000..575d765
> > --- /dev/null
> > +++ b/Documentation/leds/leds-mlxcpld.txt
> > @@ -0,0 +1,88 @@
> > +ver leds-mlxcpld
> > +==========================
> > +Driver for Mellanox systems leds.
> > +Provide system led support for the nex Mellanox systems:
> > +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
> > +"msb7800", "msn2740", "msn2100".
> > +
> > +Description
> > +-----------
> > +Driver provides the following leds for the systems "msx6710",
> > +"msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800",
> "msn2740":
> > +
> > + "status"
> > + CPLD reg offset: 0x20
> > + Bits [3:0]
> > +
> > + "psu"
> > + CPLD reg offset: 0x20
> > + Bits [7:4]
> > +
> > + "fan1"
> > + CPLD reg offset: 0x21
> > + Bits [3:0]
> > +
> > + "fan2"
> > + CPLD reg offset: 0x21
> > + Bits [7:4]
> > +
> > + "fan3"
> > + CPLD reg offset: 0x22
> > + Bits [3:0]
> > +
> > + "fan4"
> > + CPLD reg offset: 0x22
> > + Bits [7:4]
> > +
> > + Color mask for all the above leds:
> > + [bit3,bit2,bit1,bit0] or
> > + [bit7,bit6,bit5,bit4]:
> > + [0,0,0,0] = LED OFF
> > + [0,1,0,1] = Red static ON
> > + [1,1,0,1] = Green static ON
> > + [0,1,1,0] = Red blink 3Hz
> > + [1,1,1,0] = Green blink 3Hz
> > + [0,1,1,1] = Red blink 6Hz
> > + [1,1,1,1] = Green blink 6Hz
> > +
> > +Driver provides the following leds for the system "msn2100":
> > + "status"
> > + CPLD reg offset: 0x20
> > + Bits [3:0]
> > +
> > + "fan"
> > + CPLD reg offset: 0x21
> > + Bits [3:0]
> > +
> > + "psu1"
> > + CPLD reg offset: 0x23
> > + Bits [3:0]
> > +
> > + "psu2"
> > + CPLD reg offset: 0x23
> > + Bits [7:4]
> > +
> > + "uid"
> > + CPLD reg offset: 0x24
> > + Bits [3:0]
> > +
> > + Color mask for all the above leds, excepted uid:
> > + [bit3,bit2,bit1,bit0] or
> > + [bit7,bit6,bit5,bit4]:
> > + [0,0,0,0] = LED OFF
> > + [0,1,0,1] = Red static ON
> > + [1,1,0,1] = Green static ON
> > + [0,1,1,0] = Red blink 3Hz
> > + [1,1,1,0] = Green blink 3Hz
> > + [0,1,1,1] = Red blink 6Hz
> > + [1,1,1,1] = Green blink 6Hz
> > +
> > + Color mask for uid led:
> > + [bit3,bit2,bit1,bit0]:
> > + [0,0,0,0] = LED OFF
> > + [1,1,0,1] = Blue static ON
> > + [1,1,1,0] = Blue blink 3Hz
> > + [1,1,1,1] = Blue blink 6Hz
> > +
> > +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
> > +For 3Hz it is about 40 msec off and 40 msec on, for 6Hz - 80 msec off and on.
>
> I don't get this. In case of 3Hz the LED should blink three times per second, e.g
> every 333ms, duty cycle 167ms. Am i missing something?

Yes, 3Hz should 333.
My mistake.

>
> > diff --git a/MAINTAINERS b/MAINTAINERS index 0bbe4b1..adb9e9b 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -7655,6 +7655,14 @@ W: http://www.mellanox.com
> > Q: http://patchwork.ozlabs.org/project/netdev/list/
> > F: drivers/net/ethernet/mellanox/mlxsw/
> >
> > +MELLANOX MLXCPLD LED DRIVER
> > +M: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> > +L: linux-leds@xxxxxxxxxxxxxxx
> > +S: Supported
> > +W: http://www.mellanox.com
>
> Is the documentation for this chip available on the website?
>

I have a problem to provide reference to such doc.
Mellanox has per system CPLD register map description (this driver supports currently about 10 systems).
It contains different registers, among them several LED related.
Others - resets, IO, etc. And also internal registers for debug purpose.
I should verify it with our system engineers.
Is it must now, or it can be added later?

> > +F: drivers/leds/leds-mlxcpld.c
> > +F: Documentation/leds/leds-mlxcpld.txt
> > +
> > SOFT-ROCE DRIVER (rxe)
> > M: Moni Shoua <monis@xxxxxxxxxxxx>
> > L: linux-rdma@xxxxxxxxxxxxxxx
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index
> > 9dcc9b1..4cd85be 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -631,6 +631,14 @@ config LEDS_VERSATILE
> > This option enabled support for the LEDs on the ARM Versatile
> > and RealView boards. Say Y to enabled these.
> >
> > +config LEDS_MLXCPLD
> > + tristate "LED support for the Mellanox boards"
> > + depends on X86_64 && DMI
> > + depends on LEDS_CLASS
> > + help
> > + This option enabled support for the LEDs on the Mellanox
> > + boards. Say Y to enabled these.
> > +
> > comment "LED Triggers"
> > source "drivers/leds/trigger/Kconfig"
> >
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index
> > 0684c86..9a2494b 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -68,6 +68,7 @@ obj-$(CONFIG_LEDS_KTD2692) += leds-
> ktd2692.o
> > obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
> > obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
> > obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
> > +obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
> >
> > # LED SPI Drivers
> > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> > diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c
> > new file mode 100644 index 0000000..eeed35c
> > --- /dev/null
> > +++ b/drivers/leds/leds-mlxcpld.c
> > @@ -0,0 +1,399 @@
> > +/*
> > + * drivers/leds/leds-mlxcpld.c
> > + * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
> > + * Copyright (c) 2016 Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions are
> met:
> > + *
> > + * 1. Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * 2. Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in the
> > + * documentation and/or other materials provided with the distribution.
> > + * 3. Neither the names of the copyright holders nor the names of its
> > + * contributors may be used to endorse or promote products derived from
> > + * this software without specific prior written permission.
> > + *
> > + * Alternatively, this software may be distributed under the terms of
> > +the
> > + * GNU General Public License ("GPL") version 2 as published by the
> > +Free
> > + * Software Foundation.
> > + *
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS "AS IS"
> > + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> LIMITED
> > +TO, THE
> > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
> PARTICULAR
> > +PURPOSE
> > + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
> > +CONTRIBUTORS BE
> > + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
> > +OR
> > + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> PROCUREMENT
> > +OF
> > + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> > +BUSINESS
> > + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> > +WHETHER IN
> > + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> > +OTHERWISE)
> > + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> > +ADVISED OF THE
> > + * POSSIBILITY OF SUCH DAMAGE.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/device.h>
> > +#include <linux/dmi.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/leds.h>
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/version.h>
> > +
> > +#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access
> */
> > +
> > +/* Color codes for leds */
> > +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3Hz blink
> */
> > +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6Hz blink
> */
> > +#define LED_IS_OFF 0x00 /* Off */
> > +#define LED_RED_STATIC_ON 0x05 /* Solid red */
> > +#define LED_RED_BLINK_HALF (LED_RED_STATIC_ON +
> LED_OFFSET_HALF)
> > +#define LED_RED_BLINK_FULL (LED_RED_STATIC_ON +
> LED_OFFSET_FULL)
> > +#define LED_GREEN_STATIC_ON 0x0D /* Solid green */
> > +#define LED_GREEN_BLINK_HALF (LED_GREEN_STATIC_ON +
> LED_OFFSET_HALF)
> > +#define LED_GREEN_BLINK_FULL (LED_GREEN_STATIC_ON +
> LED_OFFSET_FULL)
> > +#define LED_BLINK_3HZ 160 /* ~160 msec off/on */
> > +#define LED_BLINK_6HZ 80 /* ~80 msec off/on */
>
> Please add MLXCPLD prefix to these macros.
>
> > +
> > +/**
> > + * mlxcpld_param - led access parameters:
> > + * @offset - offset for led access in CPLD device
> > + * @mask - mask for led access in CPLD device
> > + * @base_color - base color code for led **/ struct mlxcpld_param {
> > + u8 offset;
> > + u8 mask;
> > + u8 base_color;
> > +};
> > +
> > +/**
> > + * mlxcpld_led_priv - led private data:
> > + * @cled - led class device instance
> > + * @param - led CPLD access parameters **/ struct mlxcpld_led_priv {
> > + struct led_classdev cdev;
> > + struct mlxcpld_param param;
> > +};
> > +
> > +#define cdev_to_priv(c) container_of(c, struct
> mlxcpld_led_priv, cdev)
> > +
> > +/**
> > + * mlxcpld_led_profile - system led profile (defined per system class):
> > + * @offset - offset for led access in CPLD device
>
> s/led/LED/ - here and in the other comments.
>
> > + * @mask - mask for led access in CPLD device
> > + * @base_color - base color code
> > + * @brightness - default brightness setting (on/off)
> > + * @name - led name
> > +**/
> > +struct mlxcpld_led_profile {
> > + u8 offset;
> > + u8 mask;
> > + u8 base_color;
> > + enum led_brightness brightness;
> > + const char *name;
> > +};
> > +
> > +/**
> > + * mlxcpld_led_pdata - system led private data
> > + * @pdev - platform device pointer
> > + * @pled - led class device instance
> > + * @profile - system configuration profile
> > + * @num_led_instances - number of led instances
> > + * @lock - device access lock
> > +**/
> > +struct mlxcpld_led_pdata {
> > + struct platform_device *pdev;
> > + struct mlxcpld_led_priv *pled;
> > + struct mlxcpld_led_profile *profile;
> > + int num_led_instances;
> > + spinlock_t lock;
> > +};
> > +
> > +static struct mlxcpld_led_pdata *mlxcpld_led;
> > +
> > +/* Default profile fit the next Mellanox systems:
> > + * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
> > + * "msn2410", "msb7800", "msn2740"
> > + */
> > +struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
> > + {
> > + 0x21, 0xf0, LED_GREEN_STATIC_ON, 1, "fan1:green",
>
> s/fan1:green/mlxcpld:fan1:green/
>
> The same applies to the remaining entries.
>
> > + },
> > + {
> > + 0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan1:red",
> > + },
> > + {
> > + 0x21, 0x0f, LED_GREEN_STATIC_ON, 1, "fan2:green",
> > + },
> > + {
> > + 0x21, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan2:red",
> > + },
> > + {
> > + 0x22, 0xf0, LED_GREEN_STATIC_ON, 1, "fan3:green",
> > + },
> > + {
> > + 0x22, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan3:red",
> > + },
> > + {
> > + 0x22, 0x0f, LED_GREEN_STATIC_ON, 1, "fan4:green",
> > + },
> > + {
> > + 0x22, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan4:red",
> > + },
> > + {
> > + 0x20, 0x0f, LED_GREEN_STATIC_ON, 1, "psu:green",
> > + },
> > + {
> > + 0x20, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu:red",
> > + },
> > + {
> > + 0x20, 0xf0, LED_GREEN_STATIC_ON, 1, "status:green",
> > + },
> > + {
> > + 0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red",
> > + },
> > +};
> > +
> > +/* Profile fit the Mellanox systems based on "msn2100" */ struct
> > +mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
> > + {
> > + 0x21, 0xf0, LED_GREEN_STATIC_ON, 1, "fan:green",
> > + },
> > + {
> > + 0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan:red",
> > + },
> > + {
> > + 0x23, 0xf0, LED_GREEN_STATIC_ON, 1, "psu1:green",
> > + },
> > + {
> > + 0x23, 0xf0, LED_RED_STATIC_ON, LED_OFF, "psu1:red",
> > + },
> > + {
> > + 0x23, 0x0f, LED_GREEN_STATIC_ON, 1, "psu2:green",
> > + },
> > + {
> > + 0x23, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu2:red",
> > + },
> > + {
> > + 0x20, 0xf0, LED_GREEN_STATIC_ON, 1, "status:green",
> > + },
> > + {
> > + 0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red",
> > + },
> > + {
> > + 0x24, 0xf0, LED_GREEN_STATIC_ON, LED_OFF, "uid:blue",
> > + },
> > +};
> > +
> > +enum mlxcpld_led_platform_types {
> > + MLXCPLD_LED_PLATFORM_DEFAULT,
> > + MLXCPLD_LED_PLATFORM_MSN2100,
> > +};
> > +
> > +const char *mlx_product_names[] = {
> > + "DEFAULT",
> > + "MSN2100",
> > +};
> > +
> > +static enum
> > +mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
> > +{
> > + const char *mlx_product_name;
> > + int i;
> > +
> > + mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
> > + if (!mlx_product_name)
> > + return MLXCPLD_LED_PLATFORM_DEFAULT;
> > +
> > + for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) {
> > + if (strstr(mlx_product_name, mlx_product_names[i]))
> > + return i;
> > + }
> > +
> > + return MLXCPLD_LED_PLATFORM_DEFAULT; }
> > +
> > +static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
> > + u8 *data)
> > +{
> > + u32 addr = base + offset;
> > +
> > + if (rw_flag == 0)
> > + outb(*data, addr);
> > + else
> > + *data = inb(addr);
> > +}
> > +
> > +static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset) {
> > + u8 nib, val;
> > +
> > + /* Each led is controlled through low or high nibble of the relevant
> > + * CPLD register. Register offset is specified by off parameter.
>
> The preferred style for long (multi-line) comments is:
>
> /*
> * comment line 1
> * comment line 2
> */
>
>
> > + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> > + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> > + * green.
> > + * Parameter mask specifies which nibble is used for specific led: mask
> > + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> > + * higher nibble (bits from 4 to 7).
> > + */
> > + spin_lock(&mlxcpld_led->lock);
> > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
> off, 1,
> > + &val);
> > + nib = (mask == 0xf0) ? vset : (vset << 4);
> > + val = (val & mask) | nib;
> > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
> off, 0,
> > + &val);
> > + spin_unlock(&mlxcpld_led->lock);
> > +}
> > +
> > +static void mlxcpld_led_brightness(struct led_classdev *led,
> > + enum led_brightness value)
>
> s/mlxcpld_led_brightness/mlxcpld_led_set_brightness/
>
> > +{
> > + struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> > +
> > + if (value) {
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color);
> > + return;
> > + }
> > +
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + LED_IS_OFF);
> > +}
> > +
> > +static int mlxcpld_led_blink(struct led_classdev *led,
> > + unsigned long *delay_on,
> > + unsigned long *delay_off)
>
> s/mlxcpld_led_blink/mlxcpld_led_blink_set/
>
> > +{
> > + struct mlxcpld_led_priv *pled = cdev_to_priv(led);
> > +
> > + /* HW supports two types of blinking: full (6Hz) and half (3Hz).
> > + * For delay on/off zero default setting 3Hz is used.
> > + */
> > + if (!(*delay_on == 0 && *delay_off == 0) &&
> > + !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ)
> &&
> > + !(*delay_on == LED_BLINK_6HZ && *delay_off == LED_BLINK_6HZ))
> > + return -EINVAL;
> > +
> > + if (*delay_on == LED_BLINK_6HZ)
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color +
> LED_OFFSET_FULL);
> > + else
> > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
> > + pled->param.base_color +
> LED_OFFSET_HALF);
> > +
> > + return 0;
> > +}
> > +
> > +static int mlxcpld_led_config(struct device *dev,
> > + struct mlxcpld_led_pdata *cpld) {
> > + int i;
> > + int err;
> > +
> > + cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
> > + cpld->num_led_instances, GFP_KERNEL);
> > + if (!cpld->pled)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < cpld->num_led_instances; i++) {
> > + cpld->pled[i].cdev.name = cpld->profile[i].name;
> > + cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
> > + cpld->pled[i].cdev.max_brightness = 1;
> > + cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness;
> > + cpld->pled[i].cdev.blink_set = mlxcpld_led_blink;
> > + cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
> > + err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
> > + if (err)
> > + return err;
> > +
> > + cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
> > + cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
> > + cpld->pled[i].param.base_color =
> > + mlxcpld_led->profile[i].base_color;
> > +
> > + if (mlxcpld_led->profile[i].brightness)
> > + mlxcpld_led_brightness(&cpld->pled[i].cdev,
> > + mlxcpld_led->profile[i].brightness);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int __init mlxcpld_led_probe(struct platform_device *pdev) {
> > + enum mlxcpld_led_platform_types mlxcpld_led_plat =
> > +
> mlxcpld_led_platform_check_sys_type();
> > +
> > + mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
> > + GFP_KERNEL);
> > + if (!mlxcpld_led)
> > + return -ENOMEM;
> > +
> > + mlxcpld_led->pdev = pdev;
> > +
> > + switch (mlxcpld_led_plat) {
> > + case MLXCPLD_LED_PLATFORM_MSN2100:
> > + mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
> > + mlxcpld_led->num_led_instances =
> > + ARRAY_SIZE(mlxcpld_led_msn2100_profile);
> > + break;
> > +
> > + default:
> > + mlxcpld_led->profile = mlxcpld_led_default_profile;
> > + mlxcpld_led->num_led_instances =
> > + ARRAY_SIZE(mlxcpld_led_default_profile);
> > + break;
> > + }
> > +
> > + spin_lock_init(&mlxcpld_led->lock);
> > +
> > + return mlxcpld_led_config(&pdev->dev, mlxcpld_led); }
> > +
> > +static struct platform_driver mlxcpld_led_driver = {
> > + .driver = {
> > + .name = KBUILD_MODNAME,
> > + },
> > +};
> > +
> > +static int __init mlxcpld_led_init(void) {
> > + struct platform_device *pdev;
> > + int err;
> > +
> > + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL,
> 0);
> > + if (!pdev) {
> > + pr_err("Device allocation failed\n");
> > + return -ENOMEM;
> > + }
> > +
> > + err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
> > + if (err) {
> > + pr_err("Probe platform driver failed\n");
> > + platform_device_unregister(pdev);
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static void __exit mlxcpld_led_exit(void) {
> > + platform_device_unregister(mlxcpld_led->pdev);
> > + platform_driver_unregister(&mlxcpld_led_driver);
> > +}
> > +
> > +module_init(mlxcpld_led_init);
> > +module_exit(mlxcpld_led_exit);
> > +
> > +MODULE_AUTHOR("Vadim Pasternak (vadimp@xxxxxxxxxxxx)");
> > +MODULE_DESCRIPTION("Mellanox board LED driver");
> MODULE_LICENSE("GPL
> > +v2"); MODULE_ALIAS("platform:leds_mlxcpld");
> >
>
> --
> Best regards,
> Jacek Anaszewski

Best regards,
Vadim.

Next message: Julia Lawall: "[PATCH] ASoC: constify snd_pcm_ops structures"
Previous message: Srinivas Pandruvada: "Re: [RFC/RFT][PATCH 0/4] cpufreq / sched: iowait boost in intel_pstate and schedutil"
In reply to: Jacek Anaszewski: "Re: [patch v3] leds: add driver for Mellanox systems leds"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]