Re: [PATCH v3 3/3] ARM: dts: gr8: Add support for the GR8 evaluation board

From: Chen-Yu Tsai
Date: Thu Sep 08 2016 - 06:35:26 EST

On Thu, Sep 8, 2016 at 6:26 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> From: MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
>
> The GR8-EVB is a small board with an NextThing GR8, an Hynix MLC NAND,
> an AXP209 PMIC, USB host and OTG, an SPDIF output and a connectors for CSI,
> I2S and LCD.
>
> Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/ntc-gr8-evb.dts | 342 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 343 insertions(+)
> create mode 100644 arch/arm/boot/dts/ntc-gr8-evb.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d5b7d9003bd2..5b54f992ee28 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -719,6 +719,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-pcduino2.dtb \
> sun4i-a10-pov-protab2-ips9.dtb
> dtb-$(CONFIG_MACH_SUN5I) += \
> + ntc-gr8-evb.dtb \
> sun5i-a10s-auxtek-t003.dtb \
> sun5i-a10s-auxtek-t004.dtb \
> sun5i-a10s-mk802.dtb \
> diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/ntc-gr8-evb.dts
> new file mode 100644
> index 000000000000..feed7dfbdb1c
> --- /dev/null
> +++ b/arch/arm/boot/dts/ntc-gr8-evb.dts
> @@ -0,0 +1,342 @@
> +/*
> + * Copyright 2016 Free Electrons
> + * Copyright 2016 NextThing Co
> + *
> + * MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "ntc-gr8.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + model = "NextThing GR8-EVB";
> + compatible = "nextthing,gr8-evb", "nextthing,gr8";
> +
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + serial0 = &uart1;
> + serial1 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 10000 0>;
> + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
> +
> + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
> + default-brightness-level = <8>;
> + };
> +};
> +
> +&be0 {
> + status = "okay";
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
> +
> + axp209: pmic@34 {
> + reg = <0x34>;
> +
> + /*
> + * The interrupt is routed through the "External Fast
> + * Interrupt Request" pin (ball G13 of the module)
> + * directly to the main interrupt controller, without
> + * any other controller interfering.
> + */
> + interrupts = <0>;
> + };
> +};
> +
> +#include "axp209.dtsi"
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins_a>;
> + status = "okay";
> +
> + pcf8563: rtc@51 {
> + compatible = "phg,pcf8563";
> + reg = <0x51>;
> + };
> +
> + wm8978: codec@1a {

I think these should be ordered by address? Otherwise

Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>

> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8978";
> + reg = <0x1a>;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins_a>;
> + status = "okay";
> +};
> +
> +&i2s0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
> + status = "okay";
> +};
> +
> +&ir0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ir0_rx_pins_a>;
> + status = "okay";
> +};
> +
> +&lradc {
> + vref-supply = <&reg_ldo2>;
> + status = "okay";
> +
> + button@190 {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + channel = <0>;
> + voltage = <190000>;
> + };
> +
> + button@390 {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + channel = <0>;
> + voltage = <390000>;
> + };
> +
> + button@600 {
> + label = "Menu";
> + linux,code = <KEY_MENU>;
> + channel = <0>;
> + voltage = <600000>;
> + };
> +
> + button@800 {
> + label = "Search";
> + linux,code = <KEY_SEARCH>;
> + channel = <0>;
> + voltage = <800000>;
> + };
> +
> + button@980 {
> + label = "Home";
> + linux,code = <KEY_HOMEPAGE>;
> + channel = <0>;
> + voltage = <980000>;
> + };
> +
> + button@1180 {
> + label = "Esc";
> + linux,code = <KEY_ESC>;
> + channel = <0>;
> + voltage = <1180000>;
> + };
> +
> + button@1400 {
> + label = "Enter";
> + linux,code = <KEY_ENTER>;
> + channel = <0>;
> + voltage = <1400000>;
> + };
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
> + vmmc-supply = <&reg_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
> + cd-inverted;
> + status = "okay";
> +};
> +
> +&nfc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
> +
> + /* MLC Support sucks for now */
> + status = "disabled";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&otg_sram {
> + status = "okay";
> +};
> +
> +&pio {
> + mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
> + allwinner,pins = "PG0";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + usb0_id_pin_gr8_evb: usb0-id-pin@0 {
> + allwinner,pins = "PG2";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
> + allwinner,pins = "PG1";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
> + allwinner,pins = "PG13";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +};
> +
> +&pwm {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pins_a>;
> + status = "okay";
> +};
> +
> +&reg_dcdc2 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-name = "vdd-cpu";
> + regulator-always-on;
> +};
> +
> +&reg_dcdc3 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-name = "vdd-sys";
> + regulator-always-on;
> +};
> +
> +&reg_ldo1 {
> + regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "avcc";
> + regulator-always-on;
> +};
> +
> +&reg_usb1_vbus {
> + pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
> + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&rtp {
> + allwinner,ts-attached;
> +};
> +
> +&spdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spdif_tx_pins_a>;
> + status = "okay";
> +};
> +
> +&tve0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
> + status = "okay";
> +};
> +
> +&usb_otg {
> + /*
> + * The GR8-EVB has a somewhat interesting design. There's a
> + * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
> + * so everything should work just fine.
> + *
> + * Except that the pin supposed to control VBUS is not
> + * connected to any controllable output, neither to the SoC
> + * through a GPIO or to the PMIC, and it is pulled down,
> + * meaning that we will never be able to enable VBUS on this
> + * board.
> + */
> + dr_mode = "otg";
> + status = "okay";
> +};
> +
> +&usb_power_supply {
> + status = "okay";
> +};
> +
> +&usbphy {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
> + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
> + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
> + usb0_vbus_power-supply = <&usb_power_supply>;
> + usb1_vbus-supply = <&reg_usb1_vbus>;
> + status = "okay";
> +};
> --
> 2.9.3
>