Re: [PATCH v3] mmc: sdhci-msm: Add pm_runtime and system PM support

[Georgi Djakov]

On 09/08/2016 11:02 AM, Adrian Hunter wrote:
> On 01/09/16 17:23, Pramod Gurav wrote:
> > Provides runtime PM callbacks to enable and disable clock resources
> > when idle. Also support system PM callbacks to be called during system
> > suspend and resume.
> >
> > Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
>
> Can we get some Tested/Reviewed/Acked-by from people using this driver?

Hi Pramod,
Thanks for the patch. Unfortunately, my db410c board fails to
boot when i apply it.

[    1.778433] mmc0: new HS200 MMC card at address 0001
[    1.783115] mmcblk0: mmc0:0001 DS2008 7.28 GiB
[    1.783337] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[    1.787025] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[    1.792893] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[    1.802603]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[    2.693631] blk_update_request: I/O error, dev mmcblk0, sector 462880
[    2.710381] blk_update_request: I/O error, dev mmcblk0, sector 462880
[    2.710443] Buffer I/O error on dev mmcblk0p10, logical block 0, 
async page read
[    2.724827] blk_update_request: I/O error, dev mmcblk0, sector 462881
[    2.724853] Buffer I/O error on dev mmcblk0p10, logical block 1, 
async page read
...

More I/O errors are following and it is unable to mount the rootfs from
the eMMC. When i retried booting, got also the following:

[    2.877149] mmcblk0: error -110 sending status command, retrying
[    2.879408] mmcblk0: error -110 sending status command, retrying
[    2.884436] mmcblk0: error -110 sending status command, aborting
[    2.896826] mmc0: cache flush error -110

BR,
Georgi