[PATCH v3 0/9] net-next: ethernet: add sun8i-emac driver
From: Corentin Labbe
Date: Fri Sep 09 2016 - 08:46:56 EST
Hello
This patch series add the driver for sun8i-emac which handle the Ethernet MAC
present on Allwinner H3/A83T/A64 SoCs.
It supports 10/100/1000 Mbit/s speed with half/full duplex.
It can use an internal PHY (MII 10/100) or an external PHY
via RGMII/RMII.
This patch series enable the driver only for the H3 SoC since A83T and A64
doesn't have the necessary clocks present in mainline.
This patch series enable the driver only for OrangePiPC and OrangePIOne boards
since other board with H3 use external PHY which need optional regulators
that will be supported later.
The driver have been tested on the following boards:
- H3 Orange PI PC, Orange PI Plus, BananaPI-M2+
- A64 Pine64
- A83T BananaPI-M3
I would like to thanks Chen-Yu Tsai for his help on developing this driver.
Regards
Changes since v2
- Added patch to support Orange PI One
- Added a patch to enable SUN8I_EMAC in sunxi_defconfig
- Added a patch to enable pm_runtime
- The Emac clock is now used standard syscon/regmap
- Added netdev_sent_queue/netdev_completed_queue
- Added lots of documentation on working (locks, memory barrier, etc...)
- Cleaned DT bindings documentation
- Added ethernet0 aliases as suggested by Hans de Goede
- Change prefix of all DEFINE to EMAC_
- The driver is now endian safe
- Reworked the internal PHY mechanism
- Removed dma_set_mask_and_coherent(32) since it is the default for of_platform_driver
Changes since v1
- Implement NAPI
- Sorted and reworded all define
- Reworked ethtools stats strings
- Removed all unneeded __packked and __aligned
- Added tuning of RX/TX ring size via ethtool
- Corrected use of sk/skb naming
- Added some wmb when needed
- Moved irq claim/free to emac_open/close
- Lots of code refactoring
Corentin Labbe (8):
ethernet: sun8i-emac: add pm_runtime support
ethernet: add sun8i-emac driver
MAINTAINERS: Add myself as maintainer of sun8i-emac
ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac
ARM: dts: sun8i-h3: Add dt node for the syscon control module
ARM: dts: sun8i-h3: add sun8i-emac ethernet driver
ARM: dts: sun8i: Enable sun8i-emac on the Orange PI PC
ARM: sunxi: Enable sun8i-emac driver on sunxi_defconfig
Hans de Goede (1):
ARM: dts: sun8i: Enable sun8i-emac on the Orange PI One
.../bindings/net/allwinner,sun8i-emac.txt | 64 +
MAINTAINERS | 6 +
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 10 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 10 +
arch/arm/boot/dts/sun8i-h3.dtsi | 24 +
arch/arm/configs/sunxi_defconfig | 1 +
drivers/net/ethernet/allwinner/Kconfig | 13 +
drivers/net/ethernet/allwinner/Makefile | 1 +
drivers/net/ethernet/allwinner/sun8i-emac.c | 2313 ++++++++++++++++++++
9 files changed, 2442 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
create mode 100644 drivers/net/ethernet/allwinner/sun8i-emac.c
--
2.7.3