Re: [RESEND PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform

[Sergei Shtylyov]

Hello.

On 09/09/2016 09:59 PM, Randy Li wrote:

> On the rk3288 USB host-only port (the one that's not the OTG-enabled
> port) the PHY can get into a bad state when a wakeup is asserted (not
> just a wakeup from full system suspend but also a wakeup from
> autosuspend).
>
> We can get the PHY out of its bad state by asserting its "port reset",
> but unfortunately that seems to assert a reset onto the USB bus so it
> could confuse things if we don't actually deenumerate / reenumerate the
> device.
>
> We can also get the PHY out of its bad state by fully resetting it using
> the reset from the CRU (clock reset unit) in chip, which does a more full
> reset.  The CRU-based reset appears to actually cause devices on the bus
> to be removed and reinserted, which fixes the problem (albeit in a hacky
> way).
>
> It's unfortunate that we need to do a full re-enumeration of devices at
> wakeup time, but this is better than alternative of letting the bus get
> wedged.
>
> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc2/core_intr.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
> index d85c5c9..af27edc 100644
> --- a/drivers/usb/dwc2/core_intr.c
> +++ b/drivers/usb/dwc2/core_intr.c
[...]
> @@ -379,6 +380,16 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
>  			/* Restart the Phy Clock */
>  			pcgcctl &= ~PCGCTL_STOPPCLK;
>  			dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
> +
> +			/*
> +			 * It is a quirk in Rockchip RK3288, causing by

   Caused.

[...]

MBR, Sergei