Re: [PATCHv9 1/2] usb: USB Type-C connector class
From: Guenter Roeck
Date: Fri Sep 09 2016 - 16:06:27 EST
On Fri, Sep 09, 2016 at 04:48:32PM +0300, Heikki Krogerus wrote:
> The purpose of USB Type-C connector class is to provide
> unified interface for the user space to get the status and
> basic information about USB Type-C connectors on a system,
> control over data role swapping, and when the port supports
> USB Power Delivery, also control over power role swapping
> and Alternate Modes.
>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> Documentation/ABI/testing/sysfs-class-typec | 218 ++++++
> Documentation/usb/typec.txt | 103 +++
> MAINTAINERS | 9 +
> drivers/usb/Kconfig | 2 +
> drivers/usb/Makefile | 2 +
> drivers/usb/typec/Kconfig | 7 +
> drivers/usb/typec/Makefile | 1 +
> drivers/usb/typec/typec.c | 1075 +++++++++++++++++++++++++++
> include/linux/usb/typec.h | 252 +++++++
> 9 files changed, 1669 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-class-typec
> create mode 100644 Documentation/usb/typec.txt
> create mode 100644 drivers/usb/typec/Kconfig
> create mode 100644 drivers/usb/typec/Makefile
> create mode 100644 drivers/usb/typec/typec.c
> create mode 100644 include/linux/usb/typec.h
>
> diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
> new file mode 100644
> index 0000000..dcca6bd
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-class-typec
> @@ -0,0 +1,218 @@
> +USB Type-C port devices (eg. /sys/class/typec/usbc0/)
> +
> +What: /sys/class/typec/<port>/current_data_role
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + The current USB data role the port is operating in. This
> + attribute can be used for requesting data role swapping on the
> + port. Swapping is supported as synchronous operation, so
> + write(2) to the attribute will not return until the operation
> + has finished. The attribute is notified about role changes so
> + that poll(2) on the attribute wakes up.
> +
> + Valid values:
> + - host
> + - device
> +
> +What: /sys/class/typec/<port>/current_power_role
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + The current power role of the port. This attribute can be used
> + to request power role swap on the port when the port supports
> + USB Power Delivery. Swapping is supported as synchronous
> + operation, so write(2) to the attribute will not return until
> + the operation has finished. The attribute is notified about role
> + changes so that poll(2) on the attribute wakes up.
> +
> + Valid values:
> + - source
> + - sink
> +
> +What: /sys/class/typec/<port>/vconn_source
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows is the port VCONN Source. This attribute can be used to
> + request VCONN swap to change the VCONN Source during connection
> + when both the port and the partner support USB Power Delivery.
> + Swapping is supported as synchronous operation, so write(2) to
> + the attribute will not return until the operation has finished.
> + The attribute is notified about VCONN source changes so that
> + poll(2) on the attribute wakes up.
> +
> + Valid values are:
> + - 0 when the port is not the VCONN Source
> + - 1 when the port is the VCONN Source
> +
> +What: /sys/class/typec/<port>/power_operation_mode
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows the current power operational mode the port is in.
> +
> + Valid values:
> + - USB - Normal power levels defined in USB specifications
> + - BC1.2 - Power levels defined in Battery Charging Specification
> + v1.2
> + - USB Type-C 1.5A - Higher 1.5A current defined in USB Type-C
> + specification.
> + - USB Type-C 3.0A - Higher 3A current defined in USB Type-C
> + specification.
> + - USB Power Delivery - The voltages and currents defined in USB
> + Power Delivery specification
> +
> +What: /sys/class/typec/<port>/preferred_role
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + The user space can notify the driver about the preferred role.
> + It should be handled as enabling of Try.SRC or Try.SNK, as
> + defined in USB Type-C specification, in the port drivers. By
> + default there is no preferred role.
> +
> + Valid values:
> + - source
> + - sink
> + - none - to remove preference
> +
> +What: /sys/class/typec/<port>/supported_accessory_modes
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Lists the Accessory Modes, defined in the USB Type-C
> + specification, the port supports.
> +
> +What: /sys/class/typec/<port>/supported_data_roles
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Lists the USB data roles the port is capable of supporting.
> +
> + Valid values:
> + - device
> + - host
> + - device, host (DRD as defined in USB Type-C specification v1.2)
> +
> +What: /sys/class/typec/<port>/supported_power_roles
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Lists the power roles the port is capable of supporting.
> +
> + Valid values:
> + - source
> + - sink
> + - source, sink (DRP as defined in USB Type-C specification v1.2)
> +
> +What: /sys/class/typec/<port>/supports_usb_power_delivery
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows if the port supports USB Power Delivery.
> + - 1 if USB Power Delivery is supported
> + - 0 when it's not
> +
> +
> +USB Type-C partner devices (eg. /sys/class/typec/usbc0-partner/)
> +
> +What: /sys/class/typec/<port>-partner/accessory_mode
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows the Accessory Mode name, or "no" when the partner does not
> + support Accesory Modes. The Accessory Modes are defined in USB
> + Type-C Specification.
> +
> +What: /sys/class/typec/<port>-partner/supports_usb_power_delivery
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows if the partner supports USB Power Delivery:
> + - 0 when USB Power Delivery is not supported
> + - 1 when USB Power Delivery is supported
> +
> +
> +USB Type-C cable devices (eg. /sys/class/typec/usbc0-cable/)
> +
> +Note: Electronically Marked Cables will have a device also for one cable plug
> +(eg. /sys/class/typec/usbc0-plug0). If the cable is active and has also SOP
> +Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
> +second device also for the other plug. Both plugs may have their alternate modes
> +as described in USB Type-C and USB Power Delivery specifications.
> +
> +What: /sys/class/typec/<port>-cable/active
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows if the cable is active or passive.
> +
> + Valid values:
> + - 0 when the cable is passive
> + - 1 when the cable is active
> +
> +What: /sys/class/typec/<port>-cable/plug_type
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows type of the plug on the cable:
> + - Type-A - Standard A
> + - Type-B - Standard B
> + - Type-C - USB Type-C
> + - Captive - Non-standard
> +
> +What: /sys/class/typec/<port>-cable/supports_usb_power_delivery
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows if the cable supports USB Power Delivery:
> + - 0 when USB Power Delivery is not supported
> + - 1 when USB Power Delivery is supported
> +
> +
> +Alternate Mode devices (For example,
> +/sys/class/typec/usbc0-partner/usbc0-partner.svid:xxxx/). The ports, partners
> +and cable plugs can have alternate modes.
> +
> +What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/active
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows if the mode is active or not. The attribute can be used
> + for entering/exiting the mode with partners and cable plugs, and
> + with the port alternate modes it can be used for disabling
> + support for specific alternate modes. Entering/exiting modes is
> + supported as synchronous operation so write(2) to the attribute
> + does not return until the enter/exit mode operation has
> + finished. The attribute is notified when the mode is
> + entered/exited so poll(2) on the attribute wakes up.
> +
> + Valid values:
> + - 0 when the mode is deactive
> + - 1 when the mode is active
> +
> +What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/description
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows description of the mode. The description is optional for
> + the drivers, just like with the Billboard Devices.
> +
> +What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/vdo
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows the VDO in hexadecimal returned from the Discover Modes
> + command.
> +
> +What: /sys/class/typec/<port>/<port>.svid:<svid>/<mode>/supported_roles
> +Date: June 2016
> +Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +Description:
> + Shows the roles, source or sink, the mode is supported with.
> +
> + This attribute is available for the devices describing the
> + alternate modes a port supports, and it will not be exposed with
> + the devices presenting the alternate modes the partners or cable
> + plugs support.
> diff --git a/Documentation/usb/typec.txt b/Documentation/usb/typec.txt
> new file mode 100644
> index 0000000..7095a2a
> --- /dev/null
> +++ b/Documentation/usb/typec.txt
> @@ -0,0 +1,103 @@
> +USB Type-C connector class
> +==========================
> +
> +Introduction
> +------------
> +The typec class is meant for describing the USB Type-C ports in a system to the
> +user space in unified fashion. The class is designed to provide nothing else
> +except the user space interface implementation in hope that it can be utilized
> +on as many platforms as possible.
> +
> +The platforms are expected to register every USB Type-C port they have with the
> +class. In a normal case the registration will be done by a USB Type-C or PD PHY
> +driver, but it may be a driver for firmware interface such as UCSI, driver for
> +USB PD controller or even driver for Thunderbolt3 controller. This document
> +considers the component registering the USB Type-C ports with the class as "port
> +driver".
> +
> +On top of showing the capabilities, the class also offer the user space control
> +over the roles and alternate modes they support when the port driver is capable
> +of supporting those features.
> +
> +The class provides an API for the port drivers described in this document. The
> +attributes are described in Documentation/ABI/testing/sysfs-class-typec.
> +
> +
> +Interface
> +---------
> +Every port will be presented as its own device under /sys/class/typec/. The
> +first port will be named "usbc0", the second "usbc1" and so on.
> +
> +When connected, the partner will be presented also as its own device under
> +/sys/class/typec/. The parent of the partner device will always be the port. The
> +partner attached to port "usbc0" will be named "usbc0-partner". Full path to the
> +device would be /sys/class/typec/usb0/usb0-partner/.
> +
> +The cable and the two plugs on it may also be optionally presented as their own
> +devices under /sys/class/typec/. The cable attached to the port "usbc0" port
> +will be named usbc0-cable and the plug on the SOP Prime end (see USB Power
> +Delivery Specification ch. 2.4) will be named "usbc-plug0" and on the SOP Double
> +Prime end "usbc0-plug1". The parent of a cable will always be the port, and the
> +parent of the cable plugs will always be the cable.
> +
> +If the port, partner or cable plug support Alternate Modes, every Alternate Mode
> +SVID will have their own device describing them. The Alternate Modes will not be
> +attached to the typec class. For the port's "usbc0" partner, the Alternate Modes
> +would have devices presented under /sys/class/typec/usbc0-partner/. Every mode
> +that is supported will have its own group under the Alternate Mode device named
> +"mode<id>". For example /sys/class/typec/usbc0/usbc0.svid:xxxx/mode0/. The
> +requests for entering/exiting the modes happens with the "active" attribute in
> +that group.
> +
> +
> +API
> +---
> +
> +* Registering the ports
> +
> +The port drivers will describe every Type-C port they control with struct
> +typec_capability data structure, and register them with the following API:
> +
> +struct typec_port *typec_register_port(struct device *dev,
> + const struct typec_capability *cap);
> +
> +The class will provide handle to struct typec_port on success and ERR_PTR on
> +failure. The un-registration of the port happens with the following API:
> +
> +void typec_unregister_port(struct typec_port *port);
> +
> +
> +* Notifications
> +
> +When connection happens on a port, the port driver fills struct typec_connection
> +which is passed to the class. The class provides the following API for reporting
> +connection/disconnection:
> +
> +int typec_connect(struct typec_port *port, struct typec_connection *);
> +void typec_disconnect(struct typec_port *);
> +
> +When the partner end has executed a role change, the port driver uses the
> +following APIs to report it to the class:
> +
> +void typec_set_data_role(struct typec_port *, enum typec_data_role);
> +void typec_set_pwr_role(struct typec_port *, enum typec_role);
> +void typec_set_vconn_role(struct typec_port *, enum typec_role);
> +void typec_set_pwr_opmode(struct typec_port *, enum typec_pwr_opmode);
> +
> +
> +* Alternate Modes
> +
> +After connection, the port drivers register the alternate modes the partner
> +and/or cable plugs support. And before reporting disconnection, the port driver
> +_must_ unregister all the alternate modes registered for the partner and cable
> +plugs. The API takes the struct device of the partner or the cable plug as
> +parameter:
> +
> +int typec_register_altmodes(struct device *, struct typec_altmode *);
> +void typec_unregister_altmodes(struct device *);
> +
> +When the partner end enters or exits the modes, the port driver needs to notify
> +the class with the following API:
> +
> +void typec_altmode_update_active(struct typec_altmode *alt, int mode,
> + bool active);
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 59b0ed2..a7f86d1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12407,6 +12407,15 @@ F: drivers/usb/
> F: include/linux/usb.h
> F: include/linux/usb/
>
> +USB TYPEC SUBSYSTEM
> +M: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> +L: linux-usb@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/ABI/testing/sysfs-class-typec
> +F: Documentation/usb/typec.txt
> +F: drivers/usb/typec/
> +F: include/linux/usb/typec.h
> +
> USB UHCI DRIVER
> M: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> L: linux-usb@xxxxxxxxxxxxxxx
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 8689dcb..f42a3d3 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -150,6 +150,8 @@ source "drivers/usb/phy/Kconfig"
>
> source "drivers/usb/gadget/Kconfig"
>
> +source "drivers/usb/typec/Kconfig"
> +
> config USB_LED_TRIG
> bool "USB LED Triggers"
> depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index dca7856..51e381e 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -61,3 +61,5 @@ obj-$(CONFIG_USB_GADGET) += gadget/
> obj-$(CONFIG_USB_COMMON) += common/
>
> obj-$(CONFIG_USBIP_CORE) += usbip/
> +
> +obj-$(CONFIG_TYPEC) += typec/
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> new file mode 100644
> index 0000000..b229fb9
> --- /dev/null
> +++ b/drivers/usb/typec/Kconfig
> @@ -0,0 +1,7 @@
> +
> +menu "USB PD and Type-C drivers"
> +
> +config TYPEC
> + tristate
> +
> +endmenu
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> new file mode 100644
> index 0000000..1012a8b
> --- /dev/null
> +++ b/drivers/usb/typec/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_TYPEC) += typec.o
> diff --git a/drivers/usb/typec/typec.c b/drivers/usb/typec/typec.c
> new file mode 100644
> index 0000000..8fa729e
> --- /dev/null
> +++ b/drivers/usb/typec/typec.c
> @@ -0,0 +1,1075 @@
> +/*
> + * USB Type-C Connector Class
> + *
> + * Copyright (C) 2016, Intel Corporation
> + * Author: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/usb/typec.h>
> +
> +struct typec_port {
> + unsigned int id;
> + struct device dev;
> +
> + int prefer_role;
> +
> + enum typec_data_role data_role;
> + enum typec_role pwr_role;
> + enum typec_role vconn_role;
> + enum typec_pwr_opmode pwr_opmode;
> +
> + struct typec_partner *partner;
> + struct typec_cable *cable;
> +
> + unsigned int connected:1;
> +
> + const struct typec_capability *cap;
> +};
> +
> +#define to_typec_port(p) container_of(p, struct typec_port, dev)
> +
> +static DEFINE_IDA(typec_index_ida);
> +
> +static struct class typec_class = {
> + .name = "typec",
> +};
> +
> +static const char * const typec_accessory_modes[] = {
> + [TYPEC_ACCESSORY_NONE] = "no",
> + [TYPEC_ACCESSORY_AUDIO] = "Audio Adapter Accessory Mode",
> + [TYPEC_ACCESSORY_DEBUG] = "Debug Accessory Mode",
> +};
> +
> +static int sysfs_strmatch(const char * const *array, size_t n, const char *str)
> +{
> + const char *item;
> + int index;
> +
> + for (index = 0; index < n; index++) {
> + item = array[index];
> + if (!item)
> + break;
> + if (sysfs_streq(item, str))
> + return index;
> + }
> +
> + return -EINVAL;
> +}
> +
> +/* ------------------------------------------------------------------------- */
> +/* Type-C Partners */
> +
> +static void typec_dev_release(struct device *dev)
> +{
> +}
> +
> +static ssize_t partner_usb_pd_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct typec_partner *p = container_of(dev, struct typec_partner, dev);
> +
> + return sprintf(buf, "%d\n", p->usb_pd);
> +}
> +
> +static struct device_attribute dev_attr_partner_usb_pd = {
> + .attr = {
> + .name = "supports_usb_power_delivery",
> + .mode = S_IRUGO,
> + },
> + .show = partner_usb_pd_show,
> +};
> +
> +static ssize_t
> +partner_accessory_mode_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_partner *p = container_of(dev, struct typec_partner, dev);
> +
> + return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]);
> +}
> +
> +static struct device_attribute dev_attr_partner_accessory = {
> + .attr = {
> + .name = "accessory_mode",
> + .mode = S_IRUGO,
> + },
> + .show = partner_accessory_mode_show,
> +};
> +
> +static struct attribute *typec_partner_attrs[] = {
> + &dev_attr_partner_accessory.attr,
> + &dev_attr_partner_usb_pd.attr,
> + NULL
> +};
> +
> +static struct attribute_group typec_partner_group = {
> + .attrs = typec_partner_attrs,
> +};
> +
> +static const struct attribute_group *typec_partner_groups[] = {
> + &typec_partner_group,
> + NULL
> +};
> +
> +static struct device_type typec_partner_dev_type = {
> + .name = "typec_partner_device",
> + .groups = typec_partner_groups,
> + .release = typec_dev_release,
> +};
> +
> +static int
> +typec_add_partner(struct typec_port *port, struct typec_partner *partner)
> +{
> + struct device *dev = &partner->dev;
> + int ret;
> +
> + dev->class = &typec_class;
> + dev->parent = &port->dev;
> + dev->type = &typec_partner_dev_type;
> + dev_set_name(dev, "%s-partner", dev_name(&port->dev));
> +
> + ret = device_register(dev);
> + if (ret) {
> + put_device(dev);
> + return ret;
> + }
> +
> + port->partner = partner;
> + return 0;
> +}
> +
> +static void typec_remove_partner(struct typec_port *port)
> +{
> + WARN_ON(port->partner->alt_modes);
> + device_unregister(&port->partner->dev);
> +}
> +
> +/* ------------------------------------------------------------------------- */
> +/* Type-C Cable Plugs */
> +
> +static struct device_type typec_plug_dev_type = {
> + .name = "typec_plug_device",
> + .release = typec_dev_release,
> +};
> +
> +static int
> +typec_add_plug(struct typec_port *port, struct typec_plug *plug)
> +{
> + struct device *dev = &plug->dev;
> + char name[8];
> + int ret;
> +
> + sprintf(name, "plug%d", plug->index);
> +
> + dev->class = &typec_class;
> + dev->parent = &port->cable->dev;
> + dev->type = &typec_plug_dev_type;
> + dev_set_name(dev, "%s-%s", dev_name(&port->dev), name);
> +
> + ret = device_register(dev);
> + if (ret) {
> + put_device(dev);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void typec_remove_plug(struct typec_plug *plug)
> +{
> + WARN_ON(plug->alt_modes);
> + device_unregister(&plug->dev);
> +}
> +
> +/* Type-C Cables */
> +
> +static ssize_t
> +cable_active_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct typec_cable *cable = container_of(dev, struct typec_cable, dev);
> +
> + return sprintf(buf, "%d\n", cable->active);
> +}
> +
> +static struct device_attribute dev_attr_cable_active = {
> + .attr = {
> + .name = "active",
> + .mode = S_IRUGO,
> + },
> + .show = cable_active_show,
> +};
> +
> +static ssize_t cable_usb_pd_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct typec_cable *cable = container_of(dev, struct typec_cable, dev);
> +
> + return sprintf(buf, "%d\n", cable->usb_pd);
> +}
> +
> +static struct device_attribute dev_attr_cable_usb_pd = {
> + .attr = {
> + .name = "supports_usb_power_delivery",
> + .mode = S_IRUGO,
> + },
> + .show = cable_usb_pd_show,
> +};
> +
> +static const char * const typec_plug_types[] = {
> + [USB_PLUG_NONE] = "unknown",
> + [USB_PLUG_TYPE_A] = "Type-A",
> + [USB_PLUG_TYPE_B] = "Type-B",
> + [USB_PLUG_TYPE_C] = "Type-C",
> + [USB_PLUG_CAPTIVE] = "Captive",
> +};
> +
> +static ssize_t cable_plug_type_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct typec_cable *cable = container_of(dev, struct typec_cable, dev);
> +
> + return sprintf(buf, "%s\n", typec_plug_types[cable->type]);
> +}
> +
> +static struct device_attribute dev_attr_plug_type = {
> + .attr = {
> + .name = "plug_type",
> + .mode = S_IRUGO,
> + },
> + .show = cable_plug_type_show,
> +};
> +
> +static struct attribute *typec_cable_attrs[] = {
> + &dev_attr_cable_active.attr,
> + &dev_attr_cable_usb_pd.attr,
> + &dev_attr_plug_type.attr,
> + NULL
> +};
> +
> +static struct attribute_group typec_cable_group = {
> + .attrs = typec_cable_attrs,
> +};
> +
> +static const struct attribute_group *typec_cable_groups[] = {
> + &typec_cable_group,
> + NULL
> +};
> +
> +static struct device_type typec_cable_dev_type = {
> + .name = "typec_cable_device",
> + .groups = typec_cable_groups,
> + .release = typec_dev_release,
> +};
> +
> +static int typec_add_cable(struct typec_port *port, struct typec_cable *cable)
> +{
> + struct device *dev = &cable->dev;
> + int ret;
> +
> + dev->class = &typec_class;
> + dev->parent = &port->dev;
> + dev->type = &typec_cable_dev_type;
> + dev_set_name(dev, "%s-cable", dev_name(&port->dev));
> +
> + ret = device_register(dev);
> + if (ret) {
> + put_device(dev);
> + return ret;
> + }
> +
> + /* Plug1 */
> + if (!cable->usb_pd)
> + return 0;
> +
> + cable->plug[0].index = 1;
> + ret = typec_add_plug(port, &cable->plug[0]);
> + if (ret) {
> + device_unregister(dev);
> + return ret;
> + }
> +
> + /* Plug2 */
> + if (!cable->active || !cable->sop_pp_controller)
> + return 0;
> +
> + cable->plug[1].index = 2;
> + ret = typec_add_plug(port, &cable->plug[1]);
> + if (ret) {
> + typec_remove_plug(&cable->plug[0]);
> + device_unregister(dev);
> + return ret;
> + }
> +
> + port->cable = cable;
> + return 0;
> +}
> +
> +static void typec_remove_cable(struct typec_port *port)
> +{
> + if (port->cable->active) {
> + typec_remove_plug(&port->cable->plug[0]);
> + if (port->cable->sop_pp_controller)
> + typec_remove_plug(&port->cable->plug[1]);
> + }
> + device_unregister(&port->cable->dev);
> +}
> +
> +/* ------------------------------------------------------------------------- */
> +/* API for the port drivers */
> +
> +static void typec_init_roles(struct typec_port *port)
> +{
> + if (port->prefer_role < 0)
> + return;
> +
> + if (port->prefer_role == TYPEC_SOURCE) {
> + port->data_role = TYPEC_HOST;
> + port->pwr_role = TYPEC_SOURCE;
> + port->vconn_role = TYPEC_SOURCE;
> + } else {
> + /* Device mode as default also by default with DRP ports */
> + port->data_role = TYPEC_DEVICE;
> + port->pwr_role = TYPEC_SINK;
> + port->vconn_role = TYPEC_SINK;
> + }
> +}
> +
> +int typec_connect(struct typec_port *port, struct typec_connection *con)
> +{
> + int ret;
> +
> + if (!con->partner && !con->cable)
> + return -EINVAL;
> +
> + port->connected = 1;
> + port->data_role = con->data_role;
> + port->pwr_role = con->pwr_role;
> + port->vconn_role = con->vconn_role;
> + port->pwr_opmode = con->pwr_opmode;
> +
> + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
> +
> + if (con->cable) {
> + ret = typec_add_cable(port, con->cable);
> + if (ret)
> + return ret;
> + }
> +
> + if (con->partner) {
> + ret = typec_add_partner(port, con->partner);
> + if (ret) {
> + if (con->cable)
> + typec_remove_cable(port);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(typec_connect);
> +
> +void typec_disconnect(struct typec_port *port)
> +{
> + if (port->partner)
> + typec_remove_partner(port);
> +
> + if (port->cable)
> + typec_remove_cable(port);
> +
> + port->connected = 0;
> + port->partner = NULL;
> + port->cable = NULL;
> +
> + port->pwr_opmode = TYPEC_PWR_MODE_USB;
> +
> + typec_init_roles(port);
> +
> + kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
> +}
> +EXPORT_SYMBOL_GPL(typec_disconnect);
> +
> +/* --------------------------------------- */
> +/* Driver callbacks to report role updates */
> +
> +void typec_set_data_role(struct typec_port *port, enum typec_data_role role)
> +{
> + port->data_role = role;
> + sysfs_notify(&port->dev.kobj, NULL, "current_data_role");
> +}
> +EXPORT_SYMBOL(typec_set_data_role);
> +
> +void typec_set_pwr_role(struct typec_port *port, enum typec_role role)
> +{
> + port->pwr_role = role;
> + sysfs_notify(&port->dev.kobj, NULL, "current_power_role");
> +}
> +EXPORT_SYMBOL(typec_set_pwr_role);
> +
> +void typec_set_vconn_role(struct typec_port *port, enum typec_role role)
> +{
> + port->vconn_role = role;
> + sysfs_notify(&port->dev.kobj, NULL, "current_vconn_role");
> +}
> +EXPORT_SYMBOL(typec_set_vconn_role);
> +
> +void typec_set_pwr_opmode(struct typec_port *port,
> + enum typec_pwr_opmode opmode)
> +{
> + port->pwr_opmode = opmode;
> + sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode");
> +}
> +EXPORT_SYMBOL(typec_set_pwr_opmode);
> +
> +/* -------------------------------- */
> +/* Alternate Modes */
> +
> +/*
> + * typec_altmode_update_active - Notify about Enter/Exit mode
> + * @alt: Handle to the Alternate Mode
> + * @mode: Mode id
> + * @active: True when the mode has been enterred
> + */
> +void typec_altmode_update_active(struct typec_altmode *alt, int mode,
> + bool active)
> +{
> + struct typec_mode *m = alt->modes + mode;
> + char dir[6];
> +
> + m->active = active;
> + snprintf(dir, 6, "mode%d", mode);
> + sysfs_notify(&alt->dev.kobj, dir, "active");
> +}
> +EXPORT_SYMBOL(typec_altmode_update_active);
> +
> +static struct device_type typec_port_dev_type;
> +
> +/*
> + * typec_altmode2port - Alternate Mode to USB Type-C port
> + * @alt: The Alternate Mode
> + *
> + * Returns the port that the cable plug or partner with @alt is connected to.
> + */
> +struct typec_port *typec_altmode2port(struct typec_altmode *alt)
> +{
> + if (alt->dev.parent->type == &typec_plug_dev_type)
> + return to_typec_port(alt->dev.parent->parent->parent);
> + if (alt->dev.parent->type == &typec_partner_dev_type)
> + return to_typec_port(alt->dev.parent->parent);
> + if (alt->dev.parent->type == &typec_port_dev_type)
> + return to_typec_port(alt->dev.parent);
> +
> + return NULL;
> +}
> +EXPORT_SYMBOL_GPL(typec_altmode2port);
> +
> +static void typec_altmode_release(struct device *dev)
> +{
> + struct typec_altmode *alt = to_altmode(dev);
> +
> + kfree(alt->mode_groups);
> +}
> +
> +static ssize_t
> +typec_altmode_vdo_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_mode *mode = container_of(attr, struct typec_mode,
> + vdo_attr);
> +
> + return sprintf(buf, "0x%08x\n", mode->vdo);
> +}
> +
> +static ssize_t
> +typec_altmode_desc_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_mode *mode = container_of(attr, struct typec_mode,
> + desc_attr);
> +
> + return sprintf(buf, "%s\n", mode->desc ? mode->desc : "");
> +}
> +
> +static ssize_t
> +typec_altmode_active_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_mode *mode = container_of(attr, struct typec_mode,
> + active_attr);
> +
> + return sprintf(buf, "%d\n", mode->active);
> +}
> +
> +static ssize_t
> +typec_altmode_active_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct typec_mode *mode = container_of(attr, struct typec_mode,
> + active_attr);
> + struct typec_port *port = typec_altmode2port(mode->alt_mode);
> + bool activate;
> + int ret;
> +
> + ret = kstrtobool(buf, &activate);
> + if (ret)
> + return ret;
> +
> + ret = port->cap->activate_mode(mode->alt_mode, mode->index, activate);
> + if (ret)
> + return ret;
> +
> + return size;
> +}
> +
> +static ssize_t
> +typec_altmode_roles_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_mode *mode = container_of(attr, struct typec_mode,
> + roles_attr);
> + ssize_t ret;
> +
> + switch (mode->roles) {
> + case TYPEC_PORT_DFP:
> + ret = sprintf(buf, "source\n");
> + break;
> + case TYPEC_PORT_UFP:
> + ret = sprintf(buf, "sink\n");
> + break;
> + case TYPEC_PORT_DRP:
> + default:
> + ret = sprintf(buf, "source, sink\n");
> + break;
> + }
> + return ret;
> +}
> +
> +static void typec_init_modes(struct typec_altmode *alt, int is_port)
> +{
> + struct typec_mode *mode = alt->modes;
> + int i;
> +
> + for (i = 0; i < alt->n_modes; i++, mode++) {
> + mode->alt_mode = alt;
> + mode->index = i;
> + sprintf(mode->group_name, "mode%d", i);
> +
> + sysfs_attr_init(&mode->vdo_attr.attr);
> + mode->vdo_attr.attr.name = "vdo";
> + mode->vdo_attr.attr.mode = S_IRUGO;
> + mode->vdo_attr.show = typec_altmode_vdo_show;
> +
> + sysfs_attr_init(&mode->desc_attr.attr);
> + mode->desc_attr.attr.name = "description";
> + mode->desc_attr.attr.mode = S_IRUGO;
> + mode->desc_attr.show = typec_altmode_desc_show;
> +
> + sysfs_attr_init(&mode->active_attr.attr);
> + mode->active_attr.attr.name = "active";
> + mode->active_attr.attr.mode = S_IWUSR | S_IRUGO;
> + mode->active_attr.show = typec_altmode_active_show;
> + mode->active_attr.store = typec_altmode_active_store;
> +
> + mode->attrs[0] = &mode->vdo_attr.attr;
> + mode->attrs[1] = &mode->desc_attr.attr;
> + mode->attrs[2] = &mode->active_attr.attr;
> +
> + /* With ports, list the roles that the mode is supported with */
> + if (is_port) {
> + sysfs_attr_init(&mode->roles_attr.attr);
> + mode->roles_attr.attr.name = "supported_roles";
> + mode->roles_attr.attr.mode = S_IRUGO;
> + mode->roles_attr.show = typec_altmode_roles_show;
> +
> + mode->attrs[3] = &mode->roles_attr.attr;
> + }
> +
> + mode->group.attrs = mode->attrs;
> + mode->group.name = mode->group_name;
> +
> + alt->mode_groups[i] = &mode->group;
> + }
> +}
> +
> +static int
> +typec_add_altmode(struct device *parent, struct typec_altmode *alt, int is_port)
> +{
> + struct device *dev = &alt->dev;
> + int ret;
> +
> + alt->mode_groups = kcalloc(alt->n_modes + 1,
> + sizeof(struct attibute_group *), GFP_KERNEL);
> + if (!alt->mode_groups)
> + return -ENOMEM;
> +
> + typec_init_modes(alt, is_port);
> +
> + dev->groups = alt->mode_groups;
> + dev->release = typec_altmode_release;
> + dev->parent = parent;
> + /* TODO: if (!is_port) dev->bus = &typec_altmode_bus; */
> +
> + dev_set_name(dev, "%s.svid:%04x", dev_name(parent), alt->svid);
> +
> + ret = device_register(dev);
> + if (ret) {
> + put_device(dev);
> + kfree(alt->mode_groups);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __typec_register_altmodes(struct device *parent,
> + struct typec_altmode *alt_modes,
> + int is_port)
> +{
> + struct typec_altmode *alt;
> + int index;
> + int ret;
> +
> + if (!alt_modes)
> + return 0;
> +
> + for (alt = alt_modes, index = 0; alt->svid; alt++, index++) {
> + ret = typec_add_altmode(parent, alt, is_port);
> + if (ret)
> + goto err;
> + }
> +
> + return 0;
> +err:
> + for (alt = alt_modes + index; index; alt--, index--)
> + device_unregister(&alt->dev);
> +
> + return ret;
> +}
> +
> +int typec_register_altmodes(struct device *dev, struct typec_altmode *alt_modes)
> +{
> + if (dev->type == &typec_partner_dev_type) {
> + struct typec_partner *p = container_of(dev,
> + struct typec_partner,
> + dev);
> + p->alt_modes = alt_modes;
> + } else if (dev->type == &typec_plug_dev_type) {
> + struct typec_plug *p = container_of(dev, struct typec_plug,
> + dev);
> + p->alt_modes = alt_modes;
> + } else {
> + return -ENODEV;
> + }
> +
> + return __typec_register_altmodes(dev, alt_modes, false);
> +}
> +EXPORT_SYMBOL_GPL(typec_register_altmodes);
> +
> +void typec_unregister_altmodes(struct device *dev)
> +{
> + struct typec_altmode *alt_modes = NULL;
> + struct typec_altmode *alt;
> +
> + if (dev->type == &typec_partner_dev_type) {
> + struct typec_partner *p = container_of(dev,
> + struct typec_partner,
> + dev);
> + alt_modes = p->alt_modes;
> + p->alt_modes = NULL;
> + } else if (dev->type == &typec_plug_dev_type) {
> + struct typec_plug *p = container_of(dev, struct typec_plug,
> + dev);
> + alt_modes = p->alt_modes;
> + p->alt_modes = NULL;
> + }
> +
> + if (!alt_modes)
> + return;
> +
> + for (alt = alt_modes; alt->svid; alt++)
> + device_unregister(&alt->dev);
> +}
> +EXPORT_SYMBOL_GPL(typec_unregister_altmodes);
> +
> +/* ------------------------------------------------------------------------- */
> +/* USB Type-C ports */
> +
> +static const char * const typec_roles[] = {
> + [TYPEC_SINK] = "sink",
> + [TYPEC_SOURCE] = "source",
> +};
> +
> +static const char * const typec_data_roles[] = {
> + [TYPEC_DEVICE] = "device",
> + [TYPEC_HOST] = "host",
> +};
> +
> +static ssize_t
> +preferred_role_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct typec_port *port = to_typec_port(dev);
> + int role;
> + int ret;
> +
> + if (port->cap->type != TYPEC_PORT_DRP) {
> + dev_dbg(dev, "Preferred role only supported with DRP ports\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (!port->cap->try_role) {
> + dev_dbg(dev, "Setting preferred role not supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + role = sysfs_strmatch(typec_roles, ARRAY_SIZE(typec_roles), buf);
> + if (role < 0) {
> + if (sysfs_streq(buf, "none"))
> + role = TYPEC_NO_PREFERRED_ROLE;
> + else
> + return -EINVAL;
> + }
> +
> + ret = port->cap->try_role(port->cap, role);
> + if (ret)
> + return ret;
> +
> + port->prefer_role = role;
> + return size;
> +}
> +
> +static ssize_t
> +preferred_role_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + if (port->prefer_role < 0)
> + return 0;
> +
> + return sprintf(buf, "%s\n", typec_roles[port->prefer_role]);
> +}
> +static DEVICE_ATTR_RW(preferred_role);
> +
> +static ssize_t
> +current_data_role_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct typec_port *port = to_typec_port(dev);
> + int ret;
> +
> + if (port->cap->type != TYPEC_PORT_DRP) {
> + dev_dbg(dev, "data role swap only supported with DRP ports\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (!port->cap->dr_set) {
> + dev_dbg(dev, "data role swapping not supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + ret = sysfs_strmatch(typec_data_roles, ARRAY_SIZE(typec_data_roles),
> + buf);
> + if (ret < 0)
> + return ret;
> +
> + ret = port->cap->dr_set(port->cap, ret);
> + if (ret)
> + return ret;
> +
> + return size;
> +}
> +
> +static ssize_t
> +current_data_role_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + return sprintf(buf, "%s\n", typec_data_roles[port->data_role]);
> +}
> +static DEVICE_ATTR_RW(current_data_role);
> +
> +static ssize_t supported_data_roles_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + if (port->cap->type == TYPEC_PORT_DRP)
> + return sprintf(buf, "host, device\n");
> +
> + return sprintf(buf, "%s\n", typec_data_roles[port->data_role]);
> +}
> +static DEVICE_ATTR_RO(supported_data_roles);
> +
> +static ssize_t current_power_role_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct typec_port *port = to_typec_port(dev);
> + int ret = size;
> +
> + if (!port->cap->usb_pd) {
> + dev_dbg(dev, "power role swap only supported with USB PD\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (!port->cap->pr_set) {
> + dev_dbg(dev, "power role swapping not supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (port->pwr_opmode != TYPEC_PWR_MODE_PD) {
> + dev_dbg(dev, "partner unable to swap power role\n");
> + return -EIO;
> + }
> +
> + ret = sysfs_strmatch(typec_roles, ARRAY_SIZE(typec_roles), buf);
> + if (ret < 0)
> + return ret;
> +
> + ret = port->cap->pr_set(port->cap, ret);
> + if (ret)
> + return ret;
> +
> + return size;
> +}
> +
> +static ssize_t current_power_role_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + return sprintf(buf, "%s\n", typec_roles[port->pwr_role]);
> +}
> +static DEVICE_ATTR_RW(current_power_role);
> +
> +static ssize_t supported_power_roles_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + if (port->cap->usb_pd || port->cap->type == TYPEC_PORT_DRP)
> + return sprintf(buf, "source, sink\n");
> +
> + return sprintf(buf, "%s\n", typec_roles[port->pwr_role]);
> +}
> +static DEVICE_ATTR_RO(supported_power_roles);
> +
> +static const char * const typec_pwr_opmodes[] = {
> + [TYPEC_PWR_MODE_USB] = "USB",
> + [TYPEC_PWR_MODE_1_5A] = "USB Type-C 1.5A",
> + [TYPEC_PWR_MODE_3_0A] = "USB Type-C 3.0A",
> + [TYPEC_PWR_MODE_PD] = "USB Power Delivery",
> +};
> +
> +static ssize_t power_operation_mode_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]);
> +}
> +static DEVICE_ATTR_RO(power_operation_mode);
> +
> +static ssize_t vconn_source_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct typec_port *port = to_typec_port(dev);
> + enum typec_role role;
> + int ret;
> +
> + if (!port->cap->usb_pd) {
> + dev_dbg(dev, "vconn swap only supported with USB PD\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (!port->cap->vconn_set) {
> + dev_dbg(dev, "vconn swapping not supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + if (sysfs_streq(buf, "1"))
> + role = TYPEC_SOURCE;
> + else if (sysfs_streq(buf, "0"))
> + role = TYPEC_SINK;
> + else
> + return -EINVAL;
> +
> + ret = port->cap->vconn_set(port->cap, role);
> + if (ret)
> + return ret;
> +
> + return size;
> +}
> +
> +static ssize_t vconn_source_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + return sprintf(buf, "%d\n", port->vconn_role == TYPEC_SOURCE ? 1 : 0);
> +}
> +static DEVICE_ATTR_RW(vconn_source);
> +
> +static ssize_t supported_accessory_modes_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> + ssize_t ret = 0;
> + int i;
> +
> + if (!port->cap->accessory)
> + return 0;
> +
> + for (i = 0; port->cap->accessory[i]; i++)
> + ret += sprintf(buf + ret, "%s\n",
> + typec_accessory_modes[port->cap->accessory[i]]);
> + return ret;
> +}
> +static DEVICE_ATTR_RO(supported_accessory_modes);
> +
> +static ssize_t supports_usb_power_delivery_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + return sprintf(buf, "%d\n", port->cap->usb_pd);
> +}
> +static DEVICE_ATTR_RO(supports_usb_power_delivery);
> +
> +static struct attribute *typec_attrs[] = {
> + &dev_attr_current_power_role.attr,
> + &dev_attr_current_data_role.attr,
> + &dev_attr_power_operation_mode.attr,
> + &dev_attr_preferred_role.attr,
> + &dev_attr_supported_accessory_modes.attr,
> + &dev_attr_supported_data_roles.attr,
> + &dev_attr_supported_power_roles.attr,
> + &dev_attr_supports_usb_power_delivery.attr,
> + &dev_attr_vconn_source.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group typec_group = {
> + .attrs = typec_attrs,
> +};
> +
> +static const struct attribute_group *typec_groups[] = {
> + &typec_group,
> + NULL,
> +};
> +
> +static int typec_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> + int ret;
> +
> + ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev));
> + if (ret)
> + dev_err(dev, "failed to add uevent TYPEC_PORT\n");
> +
> + return ret;
> +}
> +
> +static void typec_release(struct device *dev)
> +{
> + struct typec_port *port = to_typec_port(dev);
> +
> + ida_simple_remove(&typec_index_ida, port->id);
> + kfree(port);
> +}
> +
> +static struct device_type typec_port_dev_type = {
> + .name = "typec_port",
> + .groups = typec_groups,
> + .uevent = typec_uevent,
> + .release = typec_release,
> +};
> +
> +struct typec_port *typec_register_port(struct device *dev,
> + const struct typec_capability *cap)
> +{
> + struct typec_port *port;
> + int ret;
> + int id;
> +
> + port = kzalloc(sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return ERR_PTR(-ENOMEM);
> +
> + id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL);
> + if (id < 0) {
> + kfree(port);
> + return ERR_PTR(id);
> + }
> +
> + port->prefer_role = TYPEC_NO_PREFERRED_ROLE;
> +
> + port->id = id;
> + port->cap = cap;
> + port->dev.type = &typec_port_dev_type;
> + port->dev.class = &typec_class;
> + port->dev.parent = dev;
> + dev_set_name(&port->dev, "usbc%d", id);
> +
> + typec_init_roles(port);
> +
> + ret = device_register(&port->dev);
> + if (ret)
> + goto reg_err;
> +
> + ret = __typec_register_altmodes(&port->dev, cap->alt_modes, true);
> + if (ret)
> + goto alt_err;
> +
> + return port;
> +alt_err:
> + device_unregister(&port->dev);
> +reg_err:
> + ida_simple_remove(&typec_index_ida, id);
> + put_device(&port->dev);
> + kfree(port);
> + return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(typec_register_port);
> +
> +void typec_unregister_port(struct typec_port *port)
> +{
> + struct typec_altmode *alt;
> +
> + WARN_ON(port->connected);
> +
> + if (port->cap->alt_modes)
> + for (alt = port->cap->alt_modes; alt->svid; alt++)
> + device_unregister(&alt->dev);
> + device_unregister(&port->dev);
> +}
> +EXPORT_SYMBOL_GPL(typec_unregister_port);
> +
> +static int __init typec_init(void)
> +{
> + return class_register(&typec_class);
> +}
> +subsys_initcall(typec_init);
> +
> +static void __exit typec_exit(void)
> +{
> + class_unregister(&typec_class);
> +}
> +module_exit(typec_exit);
> +
> +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("USB Type-C Connector Class");
> diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
> new file mode 100644
> index 0000000..dfb8144
> --- /dev/null
> +++ b/include/linux/usb/typec.h
> @@ -0,0 +1,252 @@
> +
> +#ifndef __LINUX_USB_TYPEC_H
> +#define __LINUX_USB_TYPEC_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +struct typec_port;
> +
> +enum typec_port_type {
> + TYPEC_PORT_DFP,
> + TYPEC_PORT_UFP,
> + TYPEC_PORT_DRP,
> +};
> +
> +enum typec_plug_type {
> + USB_PLUG_NONE,
> + USB_PLUG_TYPE_A,
> + USB_PLUG_TYPE_B,
> + USB_PLUG_TYPE_C,
> + USB_PLUG_CAPTIVE,
> +};
> +
> +enum typec_data_role {
> + TYPEC_DEVICE,
> + TYPEC_HOST,
> +};
> +
> +enum typec_role {
> + TYPEC_SINK,
> + TYPEC_SOURCE,
> +};
> +
> +enum typec_pwr_opmode {
> + TYPEC_PWR_MODE_USB,
> + TYPEC_PWR_MODE_1_5A,
> + TYPEC_PWR_MODE_3_0A,
> + TYPEC_PWR_MODE_PD,
> +};
> +
> +enum typec_accessory {
> + TYPEC_ACCESSORY_NONE,
> + TYPEC_ACCESSORY_AUDIO,
> + TYPEC_ACCESSORY_DEBUG,
> +};
> +
> +/*
> + * struct typec_mode - Individual Mode of an Alternate Mode
> + * @vdo: VDO returned by Discover Modes USB PD command
> + * @desc: Mode description
> + * @active: Tells if the mode is currently entered or not
> + * @index: Index of the mode
> + * @group_name: Name for the sysfs folder in form "mode<index>"
> + * @group: The sysfs group (folder) for the mode
> + * @attrs: The attributes for the sysfs group
> + * @vdo_attr: Device attribute to expose the VDO of the mode
> + * @desc_attr: Device attribute to expose the description of the mode
> + * @active_attr: Device attribute to expose active of the mode
> + * @roles: Only for ports. DRP if the mode is awailable in both roles
> + * @roles_attr: Device attribute, only for ports, to expose the supported roles
> + *
> + * Details about a mode of an Alternate Mode which a connector, cable plug or
> + * partner supports. Every mode will have it's own sysfs group. The details are
> + * the VDO returned by discover modes command, description for the mode and
> + * active flag telling is the mode currently active or not.
> + */
> +struct typec_mode {
> + u32 vdo;
> + char *desc;
> + unsigned int active:1;
> + /* Only for ports */
> + enum typec_port_type roles;
> +
> + struct typec_altmode *alt_mode;
> +
> + int index;
> + char group_name[8];
> + struct attribute_group group;
> + struct attribute *attrs[5];
> + struct device_attribute vdo_attr;
> + struct device_attribute desc_attr;
> + struct device_attribute active_attr;
> + /* Only for ports */
> + struct device_attribute roles_attr;
> +};
> +
> +/*
> + * struct typec_altmode - USB Type-C Alternate Mode
> + * @dev: struct device instance
> + * @name: Name for the Alternate Mode (optional)
> + * @svid: Standard or Vendor ID
> + * @n_modes: Number of modes
> + * @modes: Array of modes supported by the Alternat Mode
> + * @mode_groups: The modes as attribute groups to be exposed in sysfs
> + *
> + * Representation of an Alternate Mode that has SVID assigned by USB-IF. The
> + * array of modes will list the modes of a particular SVID that are supported by
> + * a connector, partner of a cable plug.
> + */
> +struct typec_altmode {
> + struct device dev;
> + char *name;
> +
> + u16 svid;
> + int n_modes;
> + struct typec_mode *modes;
> +
> + const struct attribute_group **mode_groups;
> +};
> +
> +#define to_altmode(d) container_of(d, struct typec_altmode, dev)
> +
> +struct typec_port *typec_altmode2port(struct typec_altmode *);
> +
> +void typec_altmode_update_active(struct typec_altmode *alt, int mode,
> + bool active);
> +
> +int typec_register_altmodes(struct device *, struct typec_altmode *);
> +void typec_unregister_altmodes(struct device *);
> +
> +/*
> + * struct typec_plug - USB Type-C Cable Plug
> + * @dev: struct device instance
> + * @index: 1 for the plug connected to DFP and 2 for the plug connected to UFP
> + * @alt_modes: Alternate Modes the cable plug supports (null terminated)
> + *
> + * Represents USB Type-C Cable Plug.
> + */
> +struct typec_plug {
> + struct device dev;
> + int index;
> + struct typec_altmode *alt_modes;
> +};
> +
> +/*
> + * struct typec_cable - USB Type-C Cable
> + * @dev: struct device instance
> + * @type: The plug type from USB PD Cable VDO
> + * @usb_pd: Electronically Marked Cable
> + * @active: Is the cable active or passive
> + * @sop_pp_controller: Tells whether both cable plugs are configurable or not
> + * @plug: The two plugs in the cable.
> + *
> + * Represents USB Type-C Cable attached to USB Type-C port. Two plugs are
> + * created if the cable has SOP Double Prime controller as defined in USB PD
> + * specification. Otherwise only one will be created if the cable is active. For
> + * passive cables no plugs are created.
> + */
> +struct typec_cable {
> + struct device dev;
> + enum typec_plug_type type;
> + u32 vdo;
> + unsigned int usb_pd:1;
> + unsigned int active:1;
> + unsigned int sop_pp_controller:1;
> +
> + struct typec_plug plug[2];
> +};
> +
> +/*
> + * struct typec_partner - USB Type-C Partner
> + * @dev: struct device instance
> + * @type: Normal USB device, charger, Alternate Mode or Accessory
> + * @usb_pd: USB Power Delivery support
> + * @vdo: VDO returned by Discover Identity USB PD command
> + * @alt_modes: Alternate Modes the partner supports (null terminated)
> + *
> + * Details about a partner that is attached to USB Type-C port.
> + */
> +struct typec_partner {
> + struct device dev;
> + unsigned int usb_pd:1;
> + u32 vdo;
> + enum typec_accessory accessory;
> + struct typec_altmode *alt_modes;
> +};
> +
> +/*
> + * struct typec_capability - USB Type-C Port Capabilities
> + * @role: DFP (Host-only), UFP (Device-only) or DRP (Dual Role)
> + * @usb_pd: USB Power Delivery support
> + * @accessory: Supported Accessory Modes (NULL terminated array)
> + * @alt_modes: Alternate Modes the connector supports (NULL terminated)
> + * @try_role: Set data role preference for DRP port
> + * @dr_set: Set Data Role
> + * @pr_set: Set Power Role
> + * @vconn_set: Set VCONN Role
> + * @activate_mode: Enter/exit given Alternate Mode
> + *
> + * Static capabilities of a single USB Type-C port.
> + */
> +struct typec_capability {
> + enum typec_port_type type;
> + unsigned int usb_pd:1;
> + enum typec_accessory *accessory;
> + struct typec_altmode *alt_modes;
> +
> + int (*try_role)(const struct typec_capability *,
> + int role);
> +
> + int (*dr_set)(const struct typec_capability *,
> + enum typec_data_role);
> + int (*pr_set)(const struct typec_capability *,
> + enum typec_role);
> + int (*vconn_set)(const struct typec_capability *,
> + enum typec_role);
> +
> + int (*activate_mode)(struct typec_altmode *,
> + int mode, int activate);
> +};
> +
> +/* Specific to try_role(). Indicates the user want's to clear the preference. */
> +#define TYPEC_NO_PREFERRED_ROLE (-1)
> +
> +/*
> + * struct typec_connection - Details about USB Type-C port connection event
> + * @partner: The attached partner
> + * @cable: The attached cable
> + * @data_role: Initial USB data role (host or device)
> + * @pwr_role: Initial Power role (source or sink)
> + * @vconn_role: Initial VCONN role (source or sink)
> + * @pwr_opmode: The power mode of the connection
> + *
> + * All the relevant details about a connection event. Wrapper that is passed to
> + * typec_connect(). The context is copied when typec_connect() is called and the
> + * structure is not used for anything else.
> + */
> +struct typec_connection {
> + struct typec_partner *partner;
> + struct typec_cable *cable;
> +
> + enum typec_data_role data_role;
> + enum typec_role pwr_role;
> + enum typec_role vconn_role;
> + enum typec_pwr_opmode pwr_opmode;
> +};
> +
> +struct typec_port *typec_register_port(struct device *dev,
> + const struct typec_capability *cap);
> +void typec_unregister_port(struct typec_port *port);
> +
> +int typec_connect(struct typec_port *port, struct typec_connection *con);
> +void typec_disconnect(struct typec_port *port);
> +
> +/* Callbacks from driver */
> +
> +void typec_set_data_role(struct typec_port *, enum typec_data_role);
> +void typec_set_pwr_role(struct typec_port *, enum typec_role);
> +void typec_set_vconn_role(struct typec_port *, enum typec_role);
> +void typec_set_pwr_opmode(struct typec_port *, enum typec_pwr_opmode);
> +
> +#endif /* __LINUX_USB_TYPEC_H */
> --
> 2.9.3
>