Re: Regulator probe

[Andy Shevchenko]

On Fri, 2016-09-09 at 17:38 +0100, Mark Brown wrote:
> On Fri, Sep 09, 2016 at 07:10:39PM +0300, Andy Shevchenko wrote:
> > On Fri, 2016-09-09 at 16:29 +0100, Mark Brown wrote:
> ...and then we correctly report that the optional supply that
> > > isn't
> > > mapped (as far as I remember) isn't there.
> But it *will be* soon there.
> Hmm... And the proper fix for this case is... (let's assume there
> > will
> > not be device tree solution in nearest future)?
> 
> To supply this particular mapping before you set full constraints.

Please, correct me if I'm wrong in the following:
1) mapping is what kept in the regulator_map_list;
2) the only way to list something for this mapping is to use one of
regulator drivers that will call regulator_register() at the end;
3) in case of fixed voltage regulator it prepares configuration and
description (based on platform code for example) of the regulator and
calls devm_regulator_register();
4) regulator_register() _will not_ add fixed regulator to the mapping if
GPIO is deferred;
5) regulator_dev_lookup() didn't see the regulator before
deferred_probe_initcall() happened.

If the above is correct, how to add mapping to be seen in 5) ?

-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy