[PATCH 23/51] extcon: adc-jack: Remove the usage of extcon_set_state()

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/extcon/extcon-adc-jack.c       |   26 ++++++++++++++------------
 include/linux/extcon/extcon-adc-jack.h |    4 ++--
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 48dec94..e62e6cd 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -3,6 +3,9 @@
  *
  * Analog Jack extcon driver with ADC-based detection capability.
  *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
  *
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;
 
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
 
 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_cable_state_(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */
 
-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_cable_state_(data->edev, def->id, false);
+	}
 }
 
 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;
 
 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index ac85f20..a0e03b1 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,8 +20,8 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state:		the corresponding extcon state (if 0, this struct
  *			denotes the last adc_jack_cond element among the array)
+ * @id:			the unique id of each external connector
  * @min_adc:		min adc value for this condition
  * @max_adc:		max adc value for this condition
  *
@@ -33,7 +33,7 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state;	/* extcon state value. 0 if invalid */
+	unsigned int id;
 	u32 min_adc;
 	u32 max_adc;
 };
-- 
1.7.9.5