[PATCH v2 3/3] tty: serial: xuartps: Wait for rx and tx reset done status

[Nava kishore Manne]

After issuing the reset, driver is not checking the rx and tx reset
done status. So, modified driver to wait for the reset done status.

Signed-off-by: Nava kishore Manne <navam@xxxxxxxxxx>
---
Changes for v2:
		-Added New patch

 drivers/tty/serial/xilinx_uartps.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 527526e..b69dea3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -694,6 +694,10 @@ static void cdns_uart_set_termios(struct uart_port *port,
 	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
 	writel(ctrl_reg, port->membase + CDNS_UART_CR);
 
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
 	/*
 	 * Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
@@ -797,6 +801,10 @@ static int cdns_uart_startup(struct uart_port *port)
 	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
 			port->membase + CDNS_UART_CR);
 
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
 	/*
 	 * Clear the RX disable bit and then set the RX enable bit to enable
 	 * the receiver.
-- 
2.1.2