[PATCH 7/7] ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440
From: Krzysztof Kozlowski
Date: Fri Sep 16 2016 - 17:43:34 EST
Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos5440.dtsi | 80 ++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 20f600225121..97c9f0e38526 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -42,7 +43,8 @@
<0x2E2000 0x1000>,
<0x2E4000 0x2000>,
<0x2E6000 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
cpus {
@@ -73,26 +75,26 @@
arm-pmu {
compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
- interrupts = <0 52 4>,
- <0 53 4>,
- <0 54 4>,
- <0 55 4>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,cortex-a15-timer",
"arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <50000000>;
};
cpufreq@160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
- interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
operating-points = <
/* KHz uV */
1500000 1100000
@@ -109,7 +111,7 @@
serial_0: serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
- interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -117,7 +119,7 @@
serial_1: serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
- interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -125,7 +127,7 @@
spi_0: spi@D0000 {
compatible = "samsung,exynos5440-spi";
reg = <0xD0000 0x100>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,spi-src-clk = <0>;
@@ -137,14 +139,14 @@
pin_ctrl: pinctrl@E0000 {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
- interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 39 IRQ_TYPE_LEVEL_HIGH>,
- <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>,
- <0 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
@@ -169,7 +171,7 @@
i2c@F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -179,7 +181,7 @@
i2c@100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -189,7 +191,7 @@
watchdog@110000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
- interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -198,7 +200,7 @@
compatible = "snps,dwmac-3.70a";
reg = <0x00230000 0x8000>;
interrupt-parent = <&gic>;
- interrupts = <0 31 4>;
+ interrupts = <GIC_SPI 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
clocks = <&clock CLK_GMAC0>;
@@ -216,8 +218,8 @@
rtc@130000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
- interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -225,7 +227,7 @@
tmuctrl_0: tmuctrl@160118 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -234,7 +236,7 @@
tmuctrl_1: tmuctrl@16011C {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -243,7 +245,7 @@
tmuctrl_2: tmuctrl@160120 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -267,7 +269,7 @@
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -275,7 +277,7 @@
ohci@220000 {
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -283,7 +285,7 @@
ehci@221000 {
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -293,9 +295,9 @@
reg = <0x290000 0x1000
0x270000 0x1000
0x271000 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 21 IRQ_TYPE_LEVEL_HIGH>,
- <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
@@ -316,9 +318,9 @@
reg = <0x2a0000 0x1000
0x272000 0x1000
0x271040 0x40>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>,
- <0 24 IRQ_TYPE_LEVEL_HIGH>,
- <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
--
2.7.4