Re: [PATCH v2 1/4] clk: sunxi-ng: Add A64 clocks

From: Maxime Ripard
Date: Sat Sep 17 2016 - 10:08:34 EST

Next message: Maxime Ripard: "Re: [PATCH v2 1/4] clk: sunxi-ng: Add A64 clocks"
Previous message: David Miller: "Re: [PATCH 0/3] constify net_device_ops structures"
Next in thread: Maxime Ripard: "Re: [PATCH v2 1/4] clk: sunxi-ng: Add A64 clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On Sat, Sep 10, 2016 at 11:24:48AM +0800, Chen-Yu Tsai wrote:
> > +static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
> > + "osc24M", 0x028,
> > + 8, 5, /* N */
> > + 4, 2, /* K */
>
> The manual says to give preference to K >= 2. I suggest swapping N/K and
> leaving a note about it, so the actual K is in the inner loop (see ccu_nk.c)
> of the factor calculation.

It also says that we should fix that frequency (and we don't), so we
don't really care.

> > +static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_mipi_clk, "pll-mipi",
> > + "pll-video0", 0x040,
> > + 8, 4, /* N */
> > + 4, 2, /* K */
>
> You need a table for K. (Manual says K >= 2).

Not really a table, but a minimum, like we have a maximum already.

> > +static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
> > + 0x074, 0, 2, ths_div_table, BIT(31), 0);
>
> Even though the mux has only one valid parent, I suggest you still implement it,
> in case some bogus value gets put in before the kernel loads.

Ack.

> > +static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
> > +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
> > + 0, 4, /* M */
> > + 16, 2, /* P */
> > + 24, 2, /* mux */
>
> Manual says the mux is 4 bits wide.

Ack.

> > +static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
> > + "pll-audio-2x", "pll-audio" };
> > +static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
> > + 0x0b0, 16, 2, BIT(31), 0);
> > +
> > +static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
> > + 0x0b4, 16, 2, BIT(31), 0);
> > +
> > +static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
> > + 0x0b8, 16, 2, BIT(31), 0);
> > +
> > +static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
> > + 0x0c0, 0, 4, BIT(31), 0);
>
> CLK_SET_PARENT_RATE for the above audio clocks?

Indeed.

> > +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
> > + 0x0cc, BIT(8), 0);
> > +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
> > + 0x0cc, BIT(9), 0);
> > +static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic",
> > + 0x0cc, BIT(10), 0);
> > +static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M",
> > + 0x0cc, BIT(11), 0);
> > +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
> > + 0x0cc, BIT(16), 0);
> > +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0",
> > + 0x0cc, BIT(17), 0);
>
> I guess we aren't modeling the 2 OHCI 12M muxes?

To be honest, I can't even make sense of it. Which clocks are using it
is unclear to me, so yeah, I don't know. I can probably leave some ID
for it though, just in case.

> > +static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
> > +static const u8 tcon1_table[] = { 0, 2, };
> > +struct ccu_div tcon1_clk = {
> > + .enable = BIT(31),
> > + .div = _SUNXI_CCU_DIV(0, 4),
> > + .mux = _SUNXI_CCU_MUX_TABLE(24, 3, tcon1_table),
> > + .common = {
> > + .reg = 0x11c,
> > + .hw.init = CLK_HW_INIT_PARENTS("tcon1",
> > + tcon1_parents,
> > + &ccu_div_ops,
> > + 0),
> > + },
> > +};
>
> CLK_SET_PARENT_RATE for the TCON clocks?

Yep

> > +static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
> > + 0x140, BIT(31), 0);
> > +
> > +static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
> > + 0x140, BIT(30), 0);
>
> CLK_SET_PARENT_RATE for the above audio clocks?

Ack.

> > +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
> > + 0x144, BIT(31), 0);
> > +
> > +static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
> > +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
> > + 0x150, 0, 4, 24, 2, BIT(31), 0);
>
> Might need CLK_SET_PARENT_RATE for hdmi?

Ack

> > +static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
> > + 0x154, BIT(31), 0);
> > +
> > +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
> > + "pll-ddr0", "pll-ddr1" };
> > +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
> > + 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
> > +
> > +static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
>
> You need a mux table = { 0, 2 } here.

Indeed

> > +static SUNXI_CCU_M_WITH_MUX_GATE(dsi_dphy_clk, "dsi-dphy", dsi_dphy_parents,
> > + 0x168, 0, 3, 24, 2, BIT(31), 0);
> > +
> > +static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
> > + 0x1a0, 0, 3, BIT(31), 0);
>
> CLK_SET_PARENT_RATE for the GPU clock?

Ack

> > +static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
> > + "pll-video0", 1, 2, 0);
>
> CLK_SET_PARENT_RATE for pll-video0-2x.

Ack

>
> > +
> > +static struct ccu_common *sun50i_a64_ccu_clks[] = {
> > + &pll_cpux_clk.common,
> > + &pll_audio_base_clk.common,
> > + &pll_video0_clk.common,
> > + &pll_ve_clk.common,
> > + &pll_ddr0_clk.common,
> > + &pll_periph0_clk.common,
> > + &pll_periph1_clk.common,
> > + &pll_video1_clk.common,
> > + &pll_gpu_clk.common,
> > + &pll_mipi_clk.common,
> > + &pll_hsic_clk.common,
> > + &pll_de_clk.common,
> > + &pll_ddr1_clk.common,
> > + &cpux_clk.common,
> > + &axi_clk.common,
> > + &ahb1_clk.common,
> > + &apb1_clk.common,
> > + &apb2_clk.common,
> > + &ahb2_clk.common,
> > + &bus_mipi_dsi_clk.common,
> > + &bus_ce_clk.common,
> > + &bus_dma_clk.common,
> > + &bus_mmc0_clk.common,
> > + &bus_mmc1_clk.common,
> > + &bus_mmc2_clk.common,
> > + &bus_nand_clk.common,
> > + &bus_dram_clk.common,
> > + &bus_emac_clk.common,
> > + &bus_ts_clk.common,
> > + &bus_hstimer_clk.common,
> > + &bus_spi0_clk.common,
> > + &bus_spi1_clk.common,
> > + &bus_otg_clk.common,
> > + &bus_ehci0_clk.common,
> > + &bus_ehci1_clk.common,
> > + &bus_ohci0_clk.common,
> > + &bus_ohci1_clk.common,
> > + &bus_ve_clk.common,
> > + &bus_tcon0_clk.common,
> > + &bus_tcon1_clk.common,
> > + &bus_deinterlace_clk.common,
> > + &bus_csi_clk.common,
> > + &bus_hdmi_clk.common,
> > + &bus_de_clk.common,
> > + &bus_gpu_clk.common,
> > + &bus_msgbox_clk.common,
> > + &bus_spinlock_clk.common,
> > + &bus_codec_clk.common,
> > + &bus_spdif_clk.common,
> > + &bus_pio_clk.common,
> > + &bus_ths_clk.common,
> > + &bus_i2s0_clk.common,
> > + &bus_i2s1_clk.common,
> > + &bus_i2s2_clk.common,
> > + &bus_i2c0_clk.common,
> > + &bus_i2c1_clk.common,
> > + &bus_i2c2_clk.common,
> > + &bus_scr_clk.common,
> > + &bus_uart0_clk.common,
> > + &bus_uart1_clk.common,
> > + &bus_uart2_clk.common,
> > + &bus_uart3_clk.common,
> > + &bus_uart4_clk.common,
> > + &bus_dbg_clk.common,
> > + &ths_clk.common,
> > + &nand_clk.common,
> > + &mmc0_clk.common,
> > + &mmc1_clk.common,
> > + &mmc2_clk.common,
> > + &ts_clk.common,
> > + &ce_clk.common,
> > + &spi0_clk.common,
> > + &spi1_clk.common,
> > + &i2s0_clk.common,
> > + &i2s1_clk.common,
> > + &i2s2_clk.common,
> > + &spdif_clk.common,
> > + &usb_phy0_clk.common,
> > + &usb_phy1_clk.common,
> > + &usb_hsic_clk.common,
> > + &usb_hsic_12m_clk.common,
> > + &usb_ohci0_clk.common,
> > + &usb_ohci1_clk.common,
> > + &dram_clk.common,
> > + &dram_ve_clk.common,
> > + &dram_csi_clk.common,
> > + &dram_deinterlace_clk.common,
> > + &dram_ts_clk.common,
> > + &de_clk.common,
> > + &tcon0_clk.common,
> > + &tcon1_clk.common,
> > + &deinterlace_clk.common,
> > + &csi_misc_clk.common,
> > + &csi_sclk_clk.common,
> > + &csi_mclk_clk.common,
> > + &ve_clk.common,
> > + &ac_dig_clk.common,
> > + &ac_dig_4x_clk.common,
> > + &avs_clk.common,
> > + &hdmi_clk.common,
> > + &hdmi_ddc_clk.common,
> > + &mbus_clk.common,
> > + &dsi_dphy_clk.common,
> > + &gpu_clk.common,
> > +};
> > +
> > +static struct clk_hw_onecell_data sun50i_a64_hw_clks = {
> > + .hws = {
> > + [CLK_OSC_12M] = &osc12M_clk.hw,
> > + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> > + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
> > + [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
> > + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> > + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> > + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
> > + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
> > + [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
> > + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> > + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
> > + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
> > + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
> > + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
> > + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
> > + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
> > + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> > + [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
> > + [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
> > + [CLK_PLL_DE] = &pll_de_clk.common.hw,
> > + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
> > + [CLK_CPUX] = &cpux_clk.common.hw,
> > + [CLK_AXI] = &axi_clk.common.hw,
> > + [CLK_AHB1] = &ahb1_clk.common.hw,
> > + [CLK_APB1] = &apb1_clk.common.hw,
> > + [CLK_APB2] = &apb2_clk.common.hw,
> > + [CLK_AHB2] = &ahb2_clk.common.hw,
> > + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
> > + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
> > + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> > + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> > + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> > + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> > + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> > + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> > + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
> > + [CLK_BUS_TS] = &bus_ts_clk.common.hw,
> > + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> > + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> > + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> > + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> > + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
> > + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
> > + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
> > + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
> > + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> > + [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
> > + [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
> > + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
> > + [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
> > + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
> > + [CLK_BUS_DE] = &bus_de_clk.common.hw,
> > + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> > + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
> > + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
> > + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
> > + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
> > + [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
> > + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
> > + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
> > + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
> > + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
> > + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> > + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> > + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> > + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> > + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> > + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> > + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> > + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
> > + [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
> > + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
> > + [CLK_THS] = &ths_clk.common.hw,
> > + [CLK_NAND] = &nand_clk.common.hw,
> > + [CLK_MMC0] = &mmc0_clk.common.hw,
> > + [CLK_MMC1] = &mmc1_clk.common.hw,
> > + [CLK_MMC2] = &mmc2_clk.common.hw,
> > + [CLK_TS] = &ts_clk.common.hw,
> > + [CLK_CE] = &ce_clk.common.hw,
> > + [CLK_SPI0] = &spi0_clk.common.hw,
> > + [CLK_SPI1] = &spi1_clk.common.hw,
> > + [CLK_I2S0] = &i2s0_clk.common.hw,
> > + [CLK_I2S1] = &i2s1_clk.common.hw,
> > + [CLK_I2S2] = &i2s2_clk.common.hw,
> > + [CLK_SPDIF] = &spdif_clk.common.hw,
> > + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> > + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> > + [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
> > + [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
> > + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
> > + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
> > + [CLK_DRAM] = &dram_clk.common.hw,
> > + [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
> > + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
> > + [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
> > + [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
> > + [CLK_DE] = &de_clk.common.hw,
> > + [CLK_TCON0] = &tcon0_clk.common.hw,
> > + [CLK_TCON1] = &tcon1_clk.common.hw,
> > + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
> > + [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
> > + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
> > + [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
> > + [CLK_VE] = &ve_clk.common.hw,
> > + [CLK_AC_DIG] = &ac_dig_clk.common.hw,
> > + [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw,
> > + [CLK_AVS] = &avs_clk.common.hw,
> > + [CLK_HDMI] = &hdmi_clk.common.hw,
> > + [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
> > + [CLK_MBUS] = &mbus_clk.common.hw,
> > + [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
> > + [CLK_GPU] = &gpu_clk.common.hw,
> > + },
> > + .num = CLK_NUMBER,
> > +};
> > +
> > +static struct ccu_reset_map sun50i_a64_ccu_resets[] = {
> > + [RST_USB_PHY0] = { 0x0cc, BIT(0) },
> > + [RST_USB_PHY1] = { 0x0cc, BIT(1) },
> > + [RST_USB_HSIC] = { 0x0cc, BIT(2) },
> > +
> > +
> > + [RST_MBUS] = { 0x0fc, BIT(31) },
> > +
> > + [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
> > + [RST_BUS_CE] = { 0x2c0, BIT(5) },
> > + [RST_BUS_DMA] = { 0x2c0, BIT(6) },
> > + [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
> > + [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
> > + [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
> > + [RST_BUS_NAND] = { 0x2c0, BIT(13) },
> > + [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
> > + [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
> > + [RST_BUS_TS] = { 0x2c0, BIT(18) },
> > + [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
> > + [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
> > + [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
> > + [RST_BUS_OTG] = { 0x2c0, BIT(23) },
> > + [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
> > + [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
> > + [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
> > + [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
> > +
> > + [RST_BUS_VE] = { 0x2c4, BIT(0) },
> > + [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
> > + [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
> > + [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
> > + [RST_BUS_CSI] = { 0x2c4, BIT(8) },
> > + [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
> > + [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
> > + [RST_BUS_DE] = { 0x2c4, BIT(12) },
> > + [RST_BUS_GPU] = { 0x2c4, BIT(20) },
> > + [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
> > + [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
> > + [RST_BUS_DBG] = { 0x2c4, BIT(31) },
> > +
> > + [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
> > +
> > + [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
> > + [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
> > + [RST_BUS_THS] = { 0x2d0, BIT(8) },
> > + [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
> > + [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
> > + [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
> > +
> > + [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
> > + [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
> > + [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
> > + [RST_BUS_SCR] = { 0x2d8, BIT(5) },
> > + [RST_BUS_UART0] = { 0x2d8, BIT(16) },
> > + [RST_BUS_UART1] = { 0x2d8, BIT(17) },
> > + [RST_BUS_UART2] = { 0x2d8, BIT(18) },
> > + [RST_BUS_UART3] = { 0x2d8, BIT(19) },
> > + [RST_BUS_UART4] = { 0x2d8, BIT(20) },
> > +};
> > +
> > +static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
> > + .ccu_clks = sun50i_a64_ccu_clks,
> > + .num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks),
> > +
> > + .hw_clks = &sun50i_a64_hw_clks,
> > +
> > + .resets = sun50i_a64_ccu_resets,
> > + .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
> > +};
> > +
> > +static void __init sun50i_a64_ccu_setup(struct device_node *node)
> > +{
> > + void __iomem *reg;
> > + u32 val;
> > +
> > + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > + if (IS_ERR(reg)) {
> > + pr_err("%s: Could not map the clock registers\n",
> > + of_node_full_name(node));
> > + return;
> > + }
> > +
> > + /* Force the PLL-Audio-1x divider to 4 */
> > + val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
> > + val &= ~GENMASK(19, 16);
> > + writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
> > +
> > + writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
> > +
> > + sunxi_ccu_probe(node, reg, &sun50i_a64_ccu_desc);
> > +}
> > +CLK_OF_DECLARE(sun50i_a64_ccu, "allwinner,sun50i-a64-ccu",
> > + sun50i_a64_ccu_setup);
> > diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
> > new file mode 100644
> > index 000000000000..e3c77d92af1c
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
> > @@ -0,0 +1,68 @@
> > +/*
> > + * Copyright 2016 Maxime Ripard
> > + *
> > + * Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef _CCU_SUN50I_A64_H_
> > +#define _CCU_SUN50I_A64_H_
> > +
> > +#include <dt-bindings/clock/sun50i-a64-ccu.h>
> > +#include <dt-bindings/reset/sun50i-a64-ccu.h>
> > +
> > +#define CLK_OSC_12M 0
> > +#define CLK_PLL_CPUX 1
> > +#define CLK_PLL_AUDIO_BASE 2
> > +#define CLK_PLL_AUDIO 3
> > +#define CLK_PLL_AUDIO_2X 4
> > +#define CLK_PLL_AUDIO_4X 5
> > +#define CLK_PLL_AUDIO_8X 6
> > +#define CLK_PLL_VIDEO0 7
> > +#define CLK_PLL_VIDEO0_2X 8
> > +#define CLK_PLL_VE 9
> > +#define CLK_PLL_DDR0 10
> > +#define CLK_PLL_PERIPH0 11
> > +#define CLK_PLL_PERIPH0_2X 12
> > +#define CLK_PLL_PERIPH1 13
> > +#define CLK_PLL_PERIPH1_2X 14
> > +#define CLK_PLL_VIDEO1 15
> > +#define CLK_PLL_GPU 16
> > +#define CLK_PLL_MIPI 17
> > +#define CLK_PLL_HSIC 18
> > +#define CLK_PLL_DE 19
> > +#define CLK_PLL_DDR1 20
> > +#define CLK_CPUX 21
> > +#define CLK_AXI 22
> > +#define CLK_APB 23
>
> This is listed but never implemented.

Yes, on purpose. If we ever need to implement it, we won't have an
headache.

> > +#define RST_USB_PHY0 0
> > +#define RST_USB_PHY1 1
> > +#define RST_USB_HSIC 2
>
> There's also a DRAM reset in 0xf4 (DRAM configuration)

Ack.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature

Next message: Maxime Ripard: "Re: [PATCH v2 1/4] clk: sunxi-ng: Add A64 clocks"
Previous message: David Miller: "Re: [PATCH 0/3] constify net_device_ops structures"
Next in thread: Maxime Ripard: "Re: [PATCH v2 1/4] clk: sunxi-ng: Add A64 clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]