Re: [PATCH 05/15] usb: chipidea: imx: Change switch order

[Fabien Lahoudere]

Please forget this submission.

On 19/09/16 12:18, Fabien Lahoudere wrote:
> Each USB controller have different behaviour, so in order to avoid to have
> several "swicth(data->index)" and lock/unlock, we prefer to get the index
> and then test for features if they exist for this index.
>
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
> ---
>  drivers/usb/chipidea/usbmisc_imx.c | 44 +++++++++++++++++++++++++-------------
>  1 file changed, 29 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 20d02a5..ed324d1 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -199,31 +199,45 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
>  	val |= MX53_USB_PLL_DIV_24_MHZ;
>  	writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
>
> -	if (data->disable_oc) {
> -		spin_lock_irqsave(&usbmisc->lock, flags);
> -		switch (data->index) {
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +
> +	switch (data->index) {
>  		case 0:
> -			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> -			val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
> +			if (data->disable_oc) {
> +				reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> +				val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
> +				if (reg && val)
> +					writel(val, reg);
> +			}
>  			break;
>  		case 1:
> -			reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> -			val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
> +			if (data->disable_oc) {
> +				reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
> +				val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
> +				if (reg && val)
> +					writel(val, reg);
> +			}
>  			break;
>  		case 2:
> -			reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
> -			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +			if (data->disable_oc) {
> +				reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
> +				val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +				if (reg && val)
> +					writel(val, reg);
> +			}
>  			break;
>  		case 3:
> -			reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
> -			val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +			if (data->disable_oc) {
> +				reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
> +				val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
> +				if (reg && val)
> +					writel(val, reg);
> +			}
>  			break;
> -		}
> -		if (reg && val)
> -			writel(val, reg);
> -		spin_unlock_irqrestore(&usbmisc->lock, flags);
>  	}
>
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +
>  	return 0;
>  }