[PATCH] gpio: Added zynq specific check for special pins on bank zero

From: Nava kishore Manne
Date: Tue Sep 20 2016 - 04:48:10 EST


From: Nava kishore Manne <nava.manne@xxxxxxxxxx>

This patch adds zynq specific check for bank 0 pins 7 and 8
are special and cannot be used as inputs

Signed-off-by: Nava kishore Manne <navam@xxxxxxxxxx>
---
drivers/gpio/gpio-zynq.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index e72794e..eae9d24 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -96,6 +96,10 @@
/* GPIO upper 16 bit mask */
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000

+/* For GPIO quirks */
+#define ZYNQ_GPIO BIT(0)
+#define ZYNQMP_GPIO BIT(1)
+
/**
* struct zynq_gpio - gpio device private data structure
* @chip: instance of the gpio_chip
@@ -122,6 +126,7 @@ struct zynq_gpio {
*/
struct zynq_platform_data {
const char *label;
+ u32 quirks;
u16 ngpio;
int max_bank;
int bank_min[ZYNQMP_GPIO_MAX_BANK];
@@ -238,13 +243,19 @@ static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
{
u32 reg;
+ bool is_zynq_gpio;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio *gpio = gpiochip_get_data(chip);

+ is_zynq_gpio = gpio->p_data->quirks & ZYNQ_GPIO;
zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio);

- /* bank 0 pins 7 and 8 are special and cannot be used as inputs */
- if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
+ /*
+ * On zynq bank 0 pins 7 and 8 are special and cannot be used
+ * as inputs.
+ */
+ if (is_zynq_gpio && bank_num == 0 &&
+ (bank_pin_num == 7 || bank_pin_num == 8))
return -EINVAL;

/* clear the bit in direction mode reg to set the pin as input */
@@ -609,6 +620,7 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {

static const struct zynq_platform_data zynqmp_gpio_def = {
.label = "zynqmp_gpio",
+ .quirks = ZYNQMP_GPIO,
.ngpio = ZYNQMP_GPIO_NR_GPIOS,
.max_bank = ZYNQMP_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
@@ -627,6 +639,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = {

static const struct zynq_platform_data zynq_gpio_def = {
.label = "zynq_gpio",
+ .quirks = ZYNQ_GPIO,
.ngpio = ZYNQ_GPIO_NR_GPIOS,
.max_bank = ZYNQ_GPIO_MAX_BANK,
.bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
--
2.1.2