Re: Cherryview wake up events

[Johannes Stezenbach]

On Tue, Sep 20, 2016 at 05:59:43PM +0200, Johannes Stezenbach wrote:
> On Tue, Sep 20, 2016 at 01:40:14PM +0300, Mika Westerberg wrote:
> > If yes, it probably does not have the normal Fixed power button but
> > instead it has something called "Windows button array device" with
> > _HID/_CID of PNP0C40. Looking at your dsdt.dsl, this looks to be the
> > case.
> > 
> > That device is driven by soc_button_array.c driver which can be enabled
> > with CONFIG_KEYBOARD_GPIO=y and CONFIG_INPUT_SOC_BUTTON_ARRAY=y. Can you
> > check if you have that enabled already?
> > 
> > You should actually see it in /proc/interrupts with names like "power"
> > and so on.
> 
> I added CONFIG_INPUT_SOC_BUTTON_ARRAY=y, but no joy.
> Maybe because the _HID is INTCFD9, only _CID is PNP0C40?
> It also has a _DSM with UUID dfbcf3c5-e7a5-44e6-9c1f-29c76f6e059c.

Or it is because the PNP0C40 device depends on GpioInt from PMIC
which isn't available...

            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
            {
                Name (CBUF, ResourceTemplate ()
                {
                    GpioInt (Edge, ActiveBoth, ExclusiveAndWake, PullUp, 0x0BB8,
                        "\\_SB.PCI0.I2C7.PMI2", 0x00, ResourceConsumer, ,
                        )
                        {   // Pin list
                            0x0016
                        }
                })
                Return (CBUF) /* \_SB_.TBAD._CRS.CBUF */
            }

Thanks,
Johannes