Re: [PATCH net-next v2 0/3] add support for RGMII on GMAC0 through TRGMII hardware module

[David Miller]

From: <sean.wang@xxxxxxxxxxxx>
Date: Thu, 22 Sep 2016 10:33:53 +0800

> By default, GMAC0 is connected to built-in switch called
> MT7530 through the proprietary interface called Turbo RGMII
> (TRGMII). TRGMII also supports well for RGMII as generic external
> PHY uses but requires some slight changes to the setup of TRGMII 
> and doesn't have well support on current driver.
> 
> So this patchset
> 1) provides the slight changes of the setup for RGMII can work
>    through TRGMII
> 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII 
>    about phy-mode on device tree to make GMAC0 distinguish which
>    mode it runs
> 3) changes dynamically source clock, TX/RX delay and interface
>    mode on TRGMII for adapting various link
> 
> Changes since v1:
> - fixed the style of comment which doesn't have a space at 
>    the beginning and end of comment lines
> - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII 
>    into linux/phy.h
> - enhance the Documentation about device tree binding for trgmii
>   which is applicable only for GMAC0 which uses fixed-link

Series applied.