[PATCH] ASoC: exynos: organize the asoc audio into a menu

From: Randy Li
Date: Mon Sep 19 2016 - 14:57:50 EST


It is simple sound card time, we could assign different codec
to a interface without making a specific driver for it. The SPDIF
and I2S interface for Samsung would be possible used by
simple-sound-card, but not sure about the PCM.

Those S3C time entries are left alone as I don't think any new board
would need them.

Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
sound/soc/samsung/Kconfig | 57 ++++++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 28 deletions(-)

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index 7b722b0094d9..f6023b46c107 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,12 +1,14 @@
-config SND_SOC_SAMSUNG
+menuconfig SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
depends on (PLAT_SAMSUNG || ARCH_EXYNOS)
select SND_SOC_GENERIC_DMAENGINE_PCM
- help
+ ---help---
Say Y or M if you want to add support for codecs attached to
the Samsung SoCs' Audio interfaces. You will also need to
select the audio interfaces to support below.

+if SND_SOC_SAMSUNG
+
config SND_S3C24XX_I2S
tristate

@@ -18,22 +20,22 @@ config SND_S3C2412_SOC_I2S
select SND_S3C_I2SV2_SOC

config SND_SAMSUNG_PCM
- tristate
+ tristate "Samsung PCM interface support"

config SND_SAMSUNG_AC97
tristate
select SND_SOC_AC97_BUS

config SND_SAMSUNG_SPDIF
- tristate
+ tristate "Samsung SPDIF transmitter support"
select SND_SOC_SPDIF

config SND_SAMSUNG_I2S
- tristate
+ tristate "Samsung I2S interface support"

config SND_SOC_SAMSUNG_NEO1973_WM8753
tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
- depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
+ depends on MACH_NEO1973_GTA02
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_BT_SCO
@@ -43,7 +45,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753

config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
- depends on SND_SOC_SAMSUNG && MACH_JIVE && I2C
+ depends on MACH_JIVE && I2C
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
@@ -51,7 +53,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750

config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
@@ -60,7 +62,6 @@ config SND_SOC_SAMSUNG_SMDK_WM8580

config SND_SOC_SAMSUNG_SMDK_WM8994
tristate "SoC I2S Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -70,7 +71,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8994

config SND_SOC_SAMSUNG_SMDK2443_WM9710
tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on SND_SOC_SAMSUNG && MACH_SMDK2443
+ depends on MACH_SMDK2443
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -80,7 +81,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710

config SND_SOC_SAMSUNG_LN2440SBC_ALC650
tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select AC97_BUS
select SND_SOC_AC97_CODEC
select SND_SAMSUNG_AC97
@@ -90,7 +91,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650

config SND_SOC_SAMSUNG_S3C24XX_UDA134X
tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
+ depends on ARCH_S3C24XX
select SND_S3C24XX_I2S
select SND_SOC_L3
select SND_SOC_UDA134X
@@ -102,21 +103,21 @@ config SND_SOC_SAMSUNG_SIMTEC

config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC23_I2C
select SND_SOC_SAMSUNG_SIMTEC

config SND_SOC_SAMSUNG_SIMTEC_HERMES
tristate "SoC I2S Audio support for Simtec Hermes board"
- depends on SND_SOC_SAMSUNG && ARCH_S3C24XX && I2C
+ depends on ARCH_S3C24XX && I2C
select SND_S3C24XX_I2S
select SND_SOC_TLV320AIC3X
select SND_SOC_SAMSUNG_SIMTEC

config SND_SOC_SAMSUNG_H1940_UDA1380
tristate "Audio support for the HP iPAQ H1940"
- depends on SND_SOC_SAMSUNG && ARCH_H1940 && I2C
+ depends on ARCH_H1940 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -124,7 +125,7 @@ config SND_SOC_SAMSUNG_H1940_UDA1380

config SND_SOC_SAMSUNG_RX1950_UDA1380
tristate "Audio support for the HP iPAQ RX1950"
- depends on SND_SOC_SAMSUNG && MACH_RX1950 && I2C
+ depends on MACH_RX1950 && I2C
select SND_S3C24XX_I2S
select SND_SOC_UDA1380
help
@@ -132,7 +133,7 @@ config SND_SOC_SAMSUNG_RX1950_UDA1380

config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
@@ -140,20 +141,19 @@ config SND_SOC_SAMSUNG_SMDK_WM9713

config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
- depends on SND_SOC_SAMSUNG && MACH_SMARTQ && I2C
+ depends on MACH_SMARTQ && I2C
select SND_SAMSUNG_I2S
select SND_SOC_WM8750

config SND_SOC_SAMSUNG_SMDK_SPDIF
tristate "SoC S/PDIF Audio support for SMDK"
- depends on SND_SOC_SAMSUNG
select SND_SAMSUNG_SPDIF
help
Say Y if you want to add support for SoC S/PDIF audio on the SMDK.

config SND_SOC_SMDK_WM8580_PCM
tristate "SoC PCM Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110)
+ depends on MACH_SMDKV210 || MACH_SMDKC110
depends on I2C
select SND_SOC_WM8580
select SND_SAMSUNG_PCM
@@ -162,7 +162,6 @@ config SND_SOC_SMDK_WM8580_PCM

config SND_SOC_SMDK_WM8994_PCM
tristate "SoC PCM Audio support for WM8994 on SMDK"
- depends on SND_SOC_SAMSUNG
depends on I2C=y
select MFD_WM8994
select SND_SOC_WM8994
@@ -172,7 +171,7 @@ config SND_SOC_SMDK_WM8994_PCM

config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
- depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER
+ depends on I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
@@ -182,14 +181,14 @@ config SND_SOC_SPEYSIDE

config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory"
- depends on SND_SOC_SAMSUNG && INPUT && I2C
+ depends on INPUT && I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM8962

config SND_SOC_BELLS
tristate "Audio support for Wolfson Bells"
- depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
+ depends on MFD_ARIZONA && I2C && SPI_MASTER
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5102
@@ -200,7 +199,7 @@ config SND_SOC_BELLS

config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select SND_SOC_WM5100
@@ -208,7 +207,7 @@ config SND_SOC_LOWLAND

config SND_SOC_LITTLEMILL
tristate "Audio support for Wolfson Littlemill"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
select SND_SAMSUNG_I2S
select MFD_WM8994
@@ -216,7 +215,7 @@ config SND_SOC_LITTLEMILL

config SND_SOC_SNOW
tristate "Audio support for Google Snow boards"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SOC_MAX98090
select SND_SOC_MAX98095
select SND_SAMSUNG_I2S
@@ -226,6 +225,8 @@ config SND_SOC_SNOW

config SND_SOC_ARNDALE_RT5631_ALC5631
tristate "Audio support for RT5631(ALC5631) on Arndale Board"
- depends on SND_SOC_SAMSUNG && I2C
+ depends on I2C
select SND_SAMSUNG_I2S
select SND_SOC_RT5631
+
+endif #SND_SOC_SAMSUNG
--
2.9.3