Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support

From: Matteo Lisi
Date: Mon Sep 26 2016 - 09:51:29 EST

Hi Fabio,

Our SOM doesn't use external PMIC.

We powered all devices with a fix voltage regulators that cannot be drive directly from SoC so
any external power rail can be driven by drivers.



Il 21/09/2016 18:46, Fabio Estevam ha scritto:
Hi Michael,

On Tue, Sep 20, 2016 at 10:23 AM, Michael Trimarchi
<michael@xxxxxxxxxxxxxxxxxxxx> wrote:

Engicam use fixed regulator always on and on on boot. Their board does
not have any
external pmu. Is this answer to your comment?
All I am saying is that "regulator-boot-on" and "regulator-always-on"
properties should be removed.

The "reg_3p3v" regulator will be turned on and off by the flexcan driver.


------------------------------------------------------------------------ <>

*/ENGICAM /*s.r.l.
50018 Scandicci - FIRENZE
Via dei Pratoni, 16
Tel. +39 055 7311387
Fax. +39 055 720608
Web <>

C.F./P.I. 05389070482
Registro Imprese di FIRENZE 542918
Capitale sociale i.v. 50.000,00â
NOTICE: This message and attachments are intended only for the use of their addresses and may contain confidential information belonging to Engicam. If you are not the intended recipient, you are hereby notified that any reading, dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately and delete this message, along with any attachments.