Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off

From: Ondrej Zary
Date: Tue Sep 27 2016 - 17:02:47 EST

On Monday 26 September 2016 14:23:01 Rafael J. Wysocki wrote:
> On Sunday, September 25, 2016 03:12:05 PM Ondrej Zary wrote:
> > Hello,
> > I've upgraded kernel (Debian Squeeze - backports) from 4.6
> > (4.6.4-1~bpo8+1) to 4.7 (4.7.2-1~bpo8+1) and IRQs stopped working with
> > error messages like this:
> >
> > ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or
> > acpi=off
> >
> > The same thing appeared on two different machines. Is it a known/fixed
> > bug?
>
> Well, maybe.
>
> Can you try 4.8-rc8, please?

Just tested 4.8-rc8 on another (3rd) machine with the same problem. The bug
is still present in 4.8-rc8.
All machines are Pentium 3 PCI/ISA systems.


[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #84 SMP Tue Sep 27 22:37:05 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: VIA Technologies, Inc. VT82C694X/694X, BIOS 6.00 PG 02/19/2002
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C9FFF write-protect
[ 0.000000] CA000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b1000, 0x016b1fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6C00 000014 (v00 VIA694)
[ 0.000000] ACPI: RSDT 0x000000001FFF3000 000028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFF3040 000074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x000000001FFF30C0 002587 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x000000001FFF0000 000040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] BRK [0x016b2000, 0x016b2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffeffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffeffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff]
[ 0.000000] On node 0 totalpages: 130958
[ 0.000000] free_area_init_node: node 0, pgdat c15ad140, node_mem_map dfbf0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126960 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @dfbd9000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-rc8+ root=/dev/sda1 ro resume=/dev/sda2
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 512308K/523832K available (3909K kernel code, 438K rwdata, 1512K rodata, 520K init, 412K bss, 11524K reserved, 0K
cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc15bc000 - 0xc163e000 ( 520 kB)
.data : 0xc13d1a45 - 0xc15baba0 (1956 kB)
.text : 0xc1000000 - 0xc13d1a45 (3910 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1199.320 MHz processor
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2398.64 BogoMIPS (lpj=4797280)
[ 0.008105] pid_max: default: 32768 minimum: 301
[ 0.008178] ACPI: Core revision 20160422
[ 0.013685] ACPI: 1 ACPI AML tables successfully acquired and loaded

[ 0.013826] ACPI: setting ELCR to 0800 (from 0e00)
[ 0.013944] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.013991] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.014824] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.014892] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.018506] Freeing SMP alternatives memory: 16K (c163e000 - c1642000)
[ 0.020479] smpboot: Max logical packages: 1
[ 0.020539] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.020582] smpboot: SMP motherboard not detected
[ 0.020624] smpboot: SMP disabled
[ 0.020669] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.020716] Performance Events:
[ 0.020762] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.020842] no hardware sampling interrupt available.
[ 0.020891] p6 PMU driver.
[ 0.020938] ... version: 0
[ 0.020983] ... bit width: 32
[ 0.021025] ... generic registers: 2
[ 0.021067] ... value mask: 00000000ffffffff
[ 0.021114] ... max period: 000000007fffffff
[ 0.021156] ... fixed-purpose events: 0
[ 0.021198] ... event mask: 0000000000000003
[ 0.022255] x86: Booted up 1 node, 1 CPUs
[ 0.022322] smpboot: Total of 1 processors activated (2398.64 BogoMIPS)
[ 0.022867] devtmpfs: initialized
[ 0.024554] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
[ 0.024796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.025130] NET: Registered protocol family 16
[ 0.025602] cpuidle: using governor ladder
[ 0.025650] cpuidle: using governor menu
[ 0.025804] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.025873] ACPI: bus type PCI registered
[ 0.069121] PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1
[ 0.069171] PCI: Using configuration type 1 for base access
[ 0.072932] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.073415] ACPI: Added _OSI(Module Device)
[ 0.073465] ACPI: Added _OSI(Processor Device)
[ 0.073510] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073554] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.078216] ACPI: Interpreter enabled
[ 0.078337] ACPI: (supports S0 S1 S4 S5)
[ 0.078384] ACPI: Using PIC for interrupt routing
[ 0.078482] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086201] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.086258] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.086313] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.086488] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.086494] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.086498] acpi PNP0A03:00: host bridge window [io 0x0d00-0x3fff window] (ignored)
[ 0.086502] acpi PNP0A03:00: host bridge window [io 0x4000-0x407f] (ignored)
[ 0.086506] acpi PNP0A03:00: host bridge window [io 0x4080-0x40ff] (ignored)
[ 0.086511] acpi PNP0A03:00: host bridge window [io 0x4100-0x4fff window] (ignored)
[ 0.086515] acpi PNP0A03:00: host bridge window [io 0x5000-0x500f] (ignored)
[ 0.086519] acpi PNP0A03:00: host bridge window [io 0x5010-0x5fff window] (ignored)
[ 0.086523] acpi PNP0A03:00: host bridge window [io 0x6000-0x607f] (ignored)
[ 0.086527] acpi PNP0A03:00: host bridge window [io 0x6080-0xffff window] (ignored)
[ 0.086532] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.086537] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.086541] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffefffff window] (ignored)
[ 0.086544] PCI: root bus 00: using default resources
[ 0.086666] PCI host bridge to bus 0000:00
[ 0.086717] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.086764] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.086814] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.086882] pci 0000:00:00.0: [1106:0691] type 00 class 0x060000
[ 0.086904] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.087143] pci 0000:00:01.0: [1106:8598] type 01 class 0x060400
[ 0.087195] pci 0000:00:01.0: supports D1
[ 0.087350] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100
[ 0.087597] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a
[ 0.087642] pci 0000:00:07.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.087663] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.087714] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.087765] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.087812] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.088125] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300
[ 0.088168] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f]
[ 0.088301] pci 0000:00:07.2: System wakeup disabled by ACPI
[ 0.088463] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300
[ 0.088504] pci 0000:00:07.3: reg 0x20: [io 0xd800-0xd81f]
[ 0.088633] pci 0000:00:07.3: System wakeup disabled by ACPI
[ 0.088789] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000
[ 0.088853] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon
[ 0.088908] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB
[ 0.089142] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100
[ 0.089160] pci 0000:00:07.5: reg 0x10: [io 0xdc00-0xdcff]
[ 0.089172] pci 0000:00:07.5: reg 0x14: [io 0xe000-0xe003]
[ 0.089183] pci 0000:00:07.5: reg 0x18: [io 0xe400-0xe403]
[ 0.089412] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[ 0.089429] pci 0000:00:0f.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.089441] pci 0000:00:0f.0: reg 0x14: [mem 0xe8000000-0xe80000ff]
[ 0.089504] pci 0000:00:0f.0: supports D1 D2
[ 0.089509] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot
[ 0.089749] pci 0000:01:00.0: [10de:002d] type 00 class 0x030000
[ 0.089766] pci 0000:01:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff]
[ 0.089777] pci 0000:01:00.0: reg 0x14: [mem 0xe4000000-0xe5ffffff pref]
[ 0.089810] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.089958] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.090014] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff]
[ 0.090020] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref]
[ 0.090032] pci_bus 0000:00: on NUMA node 0
[ 0.090426] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.091138] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.092038] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.092804] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[ 0.095235] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.095293] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.095341] vgaarb: loaded
[ 0.095386] vgaarb: bridge control possible 0000:01:00.0
[ 0.095661] SCSI subsystem initialized
[ 0.095878] libata version 3.00 loaded.
[ 0.095896] ACPI: bus type USB registered
[ 0.096073] usbcore: registered new interface driver usbfs
[ 0.096148] usbcore: registered new interface driver hub
[ 0.096230] usbcore: registered new device driver usb
[ 0.096350] PCI: Using ACPI for IRQ routing
[ 0.096402] PCI: pci_cache_line_size set to 32 bytes
[ 0.096449] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.096455] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
[ 0.097427] clocksource: Switched to clocksource pit
[ 0.116833] pnp: PnP ACPI init
[ 0.117738] system 00:00: [mem 0x000ca800-0x000cbfff] has been reserved
[ 0.117805] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.117857] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.117905] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.117954] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
[ 0.118002] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.118050] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.118097] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
[ 0.118145] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.118203] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.118842] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.118907] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119009] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.119293] pnp 00:03: [dma 2]
[ 0.119384] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.120364] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.120478] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.120532] pnp: PnP ACPI: found 6 devices
[ 0.120592] PnPBIOS: Disabled
[ 0.160276] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.161542] clocksource: Switched to clocksource acpi_pm
[ 0.161652] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe700ffff pref]
[ 0.161709] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.161761] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xe7ffffff]
[ 0.161809] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff pref]
[ 0.161866] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.161871] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.161877] pci_bus 0000:01: resource 1 [mem 0xe6000000-0xe7ffffff]
[ 0.161881] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xe5ffffff pref]
[ 0.161988] NET: Registered protocol family 2
[ 0.162559] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.162763] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.162929] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.163066] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.163145] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.163420] NET: Registered protocol family 1
[ 0.163533] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.163587] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.164770] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.164825] PCI: setting IRQ 10 as level-triggered
[ 0.164840] pci 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 10
[ 0.165239] pci 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 10
[ 0.165485] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.165537] PCI: CLS 32 bytes, default 32
[ 0.166920] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.168009] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.176534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.176609] io scheduler noop registered
[ 0.176651] io scheduler deadline registered
[ 0.176801] io scheduler cfq registered (default)
[ 0.177529] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.177600] ACPI: Power Button [PWRB]
[ 0.177798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.177850] ACPI: Sleep Button [SLPB]
[ 0.178049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.178100] ACPI: Power Button [PWRF]
[ 0.178286] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.178460] Warning: Processor Platform Limit event detected, but not handled.
[ 0.178508] Consider compiling CPUfreq support into your kernel.
[ 0.179151] isapnp: Scanning for PnP cards...
[ 0.265736] 01:01: card 'SYM 53C416'
[ 0.265784] isapnp: 1 Plug & Play card detected total
[ 0.266013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.267275] Non-volatile memory driver v1.3
[ 0.267329] Linux agpgart interface v0.103
[ 0.267439] [drm] Initialized drm 1.1.0 20060810
[ 0.275183] loop: module loaded
[ 0.275542] pata_via 0000:00:07.1: version 0.3.4
[ 0.276904] scsi host0: pata_via
[ 0.277327] scsi host1: pata_via
[ 0.277527] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 0.277575] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 0.277737] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.277787] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.277890] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.278232] ACPI: No IRQ available for PCI Interrupt Link [LNKA]. Try pci=noacpi or acpi=off
[ 0.278288] 8139too 0000:00:0f.0: PCI INT A: no GSI
[ 0.279038] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0x0001e800, 00:40:95:30:81:14, IRQ 11
[ 0.279138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.279183] ehci-pci: EHCI PCI platform driver
[ 0.279278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.279357] ohci-pci: OHCI PCI platform driver
[ 0.279427] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.279720] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.279788] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.279894] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 0.281011] hub 1-0:1.0: USB hub found
[ 0.281092] hub 1-0:1.0: 2 ports detected
[ 0.281721] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.281797] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 0.281893] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
[ 0.282482] hub 2-0:1.0: USB hub found
[ 0.282595] hub 2-0:1.0: 2 ports detected
[ 0.283075] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.283667] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.283730] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.284331] mousedev: PS/2 mouse device common for all mice
[ 0.285296] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.285400] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram
[ 0.285934] NET: Registered protocol family 17
[ 0.286133] Using IPI No-Shortcut mode
[ 0.286584] registered taskstats version 1
[ 0.287266] rtc_cmos 00:02: setting system clock to 2016-09-27 20:43:04 UTC (1475008984)
[ 0.287418] PM: Checking hibernation image partition /dev/sda2
[ 0.311773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.502870] ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100
[ 0.502930] ata1.00: 156301488 sectors, multi 16: LBA
[ 0.505854] ata1.00: configured for UDMA/100
[ 0.506375] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00FM 3G13 PQ: 0 ANSI: 5
[ 0.507373] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.507596] sd 0:0:0:0: [sda] Write Protect is off
[ 0.507648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.507707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.553107] sda: sda1 sda2 sda3
[ 0.554228] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.184053] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1149995dc85, max_idle_ns: 440795227643 ns
[ 1.226056] random: fast init done
[ 1.737001] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.739929] PM: Hibernation image partition 8:2 present
[ 1.739931] PM: Looking for hibernation image.
[ 1.740502] PM: Image not found (code -22)
[ 1.740506] PM: Hibernation image not present or could not be loaded.
[ 1.741097] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 1.780634] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.780754] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 1.782233] Freeing unused kernel memory: 520K (c15bc000 - c163e000)
[ 1.782586] Write protecting the kernel text: 3912k
[ 1.782711] Write protecting the kernel read-only data: 1516k
[ 4.713077] random: crng init done
[ 4.875889] systemd-udevd[179]: starting version 215
[ 6.732786] agpgart: Detected VIA Apollo Pro 133 chipset
[ 6.741940] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 6.933193] parport_pc: VIA 686A/8231 detected
[ 6.933202] parport_pc: probing current configuration
[ 6.933228] parport_pc: Current parallel port base: 0x0
[ 6.933233] parport_pc: VIA parallel port disabled in BIOS
[ 6.946452] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.370173] wmi: Mapper loaded
[ 7.853618] ACPI: No IRQ available for PCI Interrupt Link [LNKA]. Try pci=noacpi or acpi=off
[ 7.853697] nouveau 0000:01:00.0: PCI INT A: no GSI
[ 7.853990] ACPI: No IRQ available for PCI Interrupt Link [LNKA]. Try pci=noacpi or acpi=off
[ 7.854041] nouveau 0000:01:00.0: PCI INT A: no GSI
[ 7.854108] nouveau 0000:01:00.0: NVIDIA NV05 (20154000)
[ 7.886851] nouveau 0000:01:00.0: bios: version 02.05.20.02.00
[ 7.898215] nouveau 0000:01:00.0: bios: DCB table not found
[ 7.900378] nouveau 0000:01:00.0: bios: DCB table not found
[ 7.900929] nouveau 0000:01:00.0: bios: DCB table not found
[ 7.900985] nouveau 0000:01:00.0: bios: DCB table not found
[ 7.901070] nouveau 0000:01:00.0: bios: DCB table not found
[ 7.902468] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 7.902545] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 7.902621] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 7.902709] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 7.906600] nouveau 0000:01:00.0: fb: 32 MiB SDRAM
[ 7.929267] [TTM] Zone kernel: Available graphics memory: 256422 kiB
[ 7.929337] [TTM] Initializing pool allocator
[ 7.929915] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB
[ 7.929979] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[ 7.930029] nouveau 0000:01:00.0: DRM: BMP version 5.6
[ 7.930076] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 7.935501] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 8.000369] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 8.005083] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.005149] [drm] Driver supports precise vblank timestamp query.
[ 8.015551] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 8.052291] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo dd760400
[ 8.052887] fbcon: nouveaufb (fb0) is primary device
[ 8.282416] nouveau 0000:01:00.0: DRM: GPU lockup - switching to software fbcon
[ 8.288553] Console: switching to colour frame buffer device 160x64
[ 8.304464] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 8.304564] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 9.418370] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.079477] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.701457] i2c /dev entries driver
[ 17.047969] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 28.896052] ------------[ cut here ]------------
[ 28.899751] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0xaf/0x10b
[ 28.900021] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
[ 28.900021] Modules linked in: i2c_dev nouveau wmi video hwmon ttm sg parport_pc parport via_agp
[ 28.900021] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc8+ #84
[ 28.900021] Hardware name: VIA Technologies, Inc. VT82C694X/694X, BIOS 6.00 PG 02/19/2002
[ 28.900021] 00000000 c11aa094 df41ff44 00000000 c1033dc5 0000013c 00000009 df5aa000
[ 28.900021] 00000000 fffef740 df5aa240 c1033e4b 00000009 00000000 df41ff44 c1502916
[ 28.900021] df41ff5c c131b446 c150294f 0000013c c1502916 df5aa000 c14f38cc 00000000
[ 28.900021] Call Trace:
[ 28.900021] [<c11aa094>] ? dump_stack+0x44/0x58
[ 28.900021] [<c1033dc5>] ? __warn+0xc1/0xd8
[ 28.900021] [<c1033e4b>] ? warn_slowpath_fmt+0x2b/0x30
[ 28.900021] [<c131b446>] ? dev_watchdog+0xaf/0x10b
[ 28.900021] [<c131b397>] ? netif_tx_lock+0x51/0x51
[ 28.900021] [<c1071afd>] ? call_timer_fn+0x49/0xee
[ 28.900021] [<c1071d40>] ? __run_timers.part.29+0x10e/0x14a
[ 28.900021] [<c1276f9a>] ? scsi_finish_command+0xb9/0xd8
[ 28.900021] [<c1071eba>] ? run_timer_softirq+0x1e/0x43
[ 28.900021] [<c1037368>] ? __do_softirq+0xb6/0x203
[ 28.900021] [<c10372b2>] ? perf_trace_irq_handler_entry+0xd4/0xd4
[ 28.900021] [<c101338a>] ? do_softirq_own_stack+0x1a/0x1f
[ 28.900021] <IRQ> [<c10375de>] ? irq_exit+0x31/0x70
[ 28.900021] [<c1012e50>] ? do_IRQ+0x7a/0x8b
[ 28.900021] [<c13d080c>] ? common_interrupt+0x2c/0x34
[ 28.900021] [<c12e324d>] ? cpuidle_enter_state+0xf8/0x1b4
[ 28.900021] [<c1059623>] ? cpu_startup_entry+0x188/0x209
[ 28.900021] [<c15bca12>] ? start_kernel+0x30f/0x312
[ 28.900021] ---[ end trace d2a6e90b9c4ffc81 ]---
[ 31.968232] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 44.000081] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 57.056093] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 69.088087] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 104.928090] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 172.000086] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 306.144086] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 367.328086] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 434.144088] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 568.288086] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 636.128083] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 702.176086] 8139too 0000:00:0f.0 eth0: link up, 10Mbps, half-duplex, lpa 0x0000


--
Ondrej Zary