Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off

From: Ondrej Zary
Date: Wed Sep 28 2016 - 13:03:05 EST

Next message: Randy Dunlap: "Re: linux-next: Tree for Sep 28 (drivers/gpu/drm/amd/amdgpu/amdgpu.ko)"
Previous message: Moritz Fischer: "[PATCH 3/3] mfd: cros_ec_spi: Add compatible string for NI version of cros-ec-spi"
In reply to: Sinan Kaya: "Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off"
Next in thread: Sinan Kaya: "Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wednesday 28 September 2016 16:11:39 Sinan Kaya wrote:
> On 9/28/2016 4:32 AM, Ondrej Zary wrote:
> >>> OK
> >>>
> >>> > > Sinan, can you help, please?
> >> >
> >> > Sure, let's see what's going on. I was writing an email.
> >> >
> >> > Can we apply this and collect the kernel log? It also helps to see the
> >> > kernel log from a working combination.
> >
> > This is from yet another machine with the same problem:
>
> Thanks, It sounds like you have more than one machine with similar
> problems. Can you collect the log from the other machines with 4.8-rc8?
>
> and also a boot log with 4.6 kernel where things are working?

The attached logs are from another machine:

dmesg-bad-debug.txt: 4.8-rc8 with your debug patch - bad

dmesg-reverted.txt: 4.8-rc8 with patches (as per Rafael's suggestion)
reverted - good

dmesg-3.6.txt: 4.6 (Debian kernel) - good

--
Ondrej Zary
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #110 SMP Wed Sep 28 18:39:32 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map dfbfd020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @dfbe6000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129947
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda3 ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 512336K/523884K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 11548K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc15c1000 - 0xc1644000 ( 524 kB)
.data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB)
.text : 0xc1000000 - 0xc13d3cc1 (3919 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1365.077 MHz processor
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2730.15 BogoMIPS (lpj=5460308)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004037] ACPI: Core revision 20160422
[ 0.008736] ACPI: 1 ACPI AML tables successfully acquired and loaded

[ 0.008749] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.008799] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008802] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009413] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.009421] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.012358] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.012620] smpboot: Max logical packages: 1
[ 0.012625] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.012627] smpboot: SMP motherboard not detected
[ 0.012628] smpboot: SMP disabled
[ 0.012631] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.012634] Performance Events:
[ 0.012640] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012642] no hardware sampling interrupt available.
[ 0.012646] p6 PMU driver.
[ 0.012651] ... version: 0
[ 0.012653] ... bit width: 32
[ 0.012654] ... generic registers: 2
[ 0.012656] ... value mask: 00000000ffffffff
[ 0.012658] ... max period: 000000007fffffff
[ 0.012659] ... fixed-purpose events: 0
[ 0.012661] ... event mask: 0000000000000003
[ 0.013422] x86: Booted up 1 node, 1 CPUs
[ 0.013429] smpboot: Total of 1 processors activated (2730.15 BogoMIPS)
[ 0.013754] devtmpfs: initialized
[ 0.014437] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.014568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014788] NET: Registered protocol family 16
[ 0.015172] cpuidle: using governor ladder
[ 0.015175] cpuidle: using governor menu
[ 0.015309] Simple Boot Flag at 0x46 set to 0x1
[ 0.015323] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.015335] ACPI: bus type PCI registered
[ 0.019173] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.019176] PCI: Using configuration type 1 for base access
[ 0.022424] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.022764] ACPI: Added _OSI(Module Device)
[ 0.022767] ACPI: Added _OSI(Processor Device)
[ 0.022769] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.022772] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.024714] ACPI: Interpreter enabled
[ 0.024768] ACPI: (supports S0 S1 S4 S5)
[ 0.024771] ACPI: Using PIC for interrupt routing
[ 0.024815] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.031717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.031893] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.032101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.032266] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.032421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.032433] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.032444] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.032452] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.032560] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.032564] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.032568] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.032571] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.032575] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.032579] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.032581] PCI: root bus 00: using default resources
[ 0.032687] PCI host bridge to bus 0000:00
[ 0.032693] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.032697] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.032702] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.032722] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.032736] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.032898] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.033028] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.033203] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.033244] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.033264] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.033268] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.033271] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.033275] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.033390] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.033431] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.033507] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.033597] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.033602] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.033668] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.033674] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.033680] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.033818] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.033831] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.033870] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033977] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.033990] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.034000] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.034032] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.034150] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.034164] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.034377] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.034393] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.034402] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.034411] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.034433] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.034464] pci 0000:01:00.0: supports D1 D2
[ 0.034561] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.034567] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.034572] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.034577] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.034586] pci_bus 0000:00: on NUMA node 0
[ 0.037603] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.037608] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.037610] vgaarb: loaded
[ 0.037612] vgaarb: bridge control possible 0000:01:00.0
[ 0.037782] SCSI subsystem initialized
[ 0.037897] libata version 3.00 loaded.
[ 0.037908] ACPI: bus type USB registered
[ 0.037966] usbcore: registered new interface driver usbfs
[ 0.037993] usbcore: registered new interface driver hub
[ 0.038030] usbcore: registered new device driver usb
[ 0.038095] PCI: Using ACPI for IRQ routing
[ 0.038102] PCI: pci_cache_line_size set to 32 bytes
[ 0.038138] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.038142] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.038877] clocksource: Switched to clocksource pit
[ 0.052200] pnp: PnP ACPI init
[ 0.052564] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.052572] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.052577] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.052583] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.052593] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.053257] system 00:01: [io 0xe400-0xe43f] has been reserved
[ 0.053263] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.053268] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.053273] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.053277] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.053286] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.053328] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1
[ 0.053384] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.053834] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1
[ 0.053839] pnp 00:03: [dma 2]
[ 0.053861] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0
[ 0.053917] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.054764] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1
[ 0.054768] pnp 00:04: [dma 3]
[ 0.054795] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0
[ 0.054798] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0
[ 0.054812] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0
[ 0.054815] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0
[ 0.054829] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0
[ 0.054832] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0
[ 0.054885] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.055381] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1
[ 0.055405] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0
[ 0.055414] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0
[ 0.055423] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0
[ 0.055431] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0
[ 0.055440] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0
[ 0.055443] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0
[ 0.055445] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0
[ 0.055448] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0
[ 0.055451] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0
[ 0.055454] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0
[ 0.055529] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.056204] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1
[ 0.056251] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.056660] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20105c active = 1
[ 0.056673] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1405c active = 0
[ 0.056676] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0
[ 0.056679] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0
[ 0.056681] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0
[ 0.056684] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0
[ 0.056687] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 0
[ 0.056753] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.056771] pnp: PnP ACPI: found 8 devices
[ 0.056778] PnPBIOS: Disabled
[ 0.095595] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.095636] clocksource: Switched to clocksource acpi_pm
[ 0.095679] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.095687] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.095695] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.095699] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.095706] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.095711] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095720] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.095724] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.095728] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.095732] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.095736] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095816] NET: Registered protocol family 2
[ 0.096204] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.096251] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.096335] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.096413] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096591] NET: Registered protocol family 1
[ 0.096627] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096799] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096803] penalty[15] = 0x10005c
[ 0.096804] penalty[14] = 0x10005c
[ 0.096806] penalty[12] = 0x20205c
[ 0.096807] penalty[11] = 0x5c
[ 0.096809] penalty[10] = 0x205c
[ 0.096811] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096813] penalty[9] = 0x100005c
[ 0.096814] penalty[7] = 0x11505c
[ 0.096816] penalty[6] = 0x11105c
[ 0.096818] penalty[5] = 0x1505c
[ 0.096819] penalty[4] = 0x11405c
[ 0.096821] penalty[3] = 0x1405c
[ 0.096823] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.096870] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096875] pci 0000:00:04.2: PCI INT D: no GSI
[ 0.096922] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.096926] PCI: CLS 32 bytes, default 32
[ 0.098121] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.098940] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.105896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.105904] io scheduler noop registered
[ 0.105906] io scheduler deadline registered
[ 0.105988] io scheduler cfq registered (default)
[ 0.106528] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.106538] ACPI: Power Button [PWRB]
[ 0.106683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.106687] ACPI: Power Button [PWRF]
[ 0.106786] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.106876] Warning: Processor Platform Limit event detected, but not handled.
[ 0.106878] Consider compiling CPUfreq support into your kernel.
[ 0.107321] isapnp: Scanning for PnP cards...
[ 0.197568] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1605c active = 0
[ 0.201162] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1705c active = 0
[ 0.201165] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11605c active = 0
[ 0.201168] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.201171] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.201173] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x200105c active = 0
[ 0.201176] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x305c active = 0
[ 0.204775] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1805c active = 0
[ 0.204778] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11705c active = 0
[ 0.204780] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.204782] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.204785] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x300205c active = 0
[ 0.204788] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x405c active = 0
[ 0.207619] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1905c active = 0
[ 0.207622] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11805c active = 0
[ 0.207624] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.207626] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.207628] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x400305c active = 0
[ 0.207631] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x505c active = 0
[ 0.209617] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1a05c active = 0
[ 0.209620] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11905c active = 0
[ 0.209622] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.209625] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.209627] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x500405c active = 0
[ 0.209630] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x605c active = 0
[ 0.212952] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1b05c active = 0
[ 0.212955] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11a05c active = 0
[ 0.212958] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.212960] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.212962] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x600505c active = 0
[ 0.212965] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x705c active = 0
[ 0.215411] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1c05c active = 0
[ 0.215413] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11b05c active = 0
[ 0.215416] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.215418] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.215420] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x700605c active = 0
[ 0.215423] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x805c active = 0
[ 0.217018] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1d05c active = 0
[ 0.217021] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11c05c active = 0
[ 0.217023] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.217025] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.217028] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x800705c active = 0
[ 0.217030] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x905c active = 0
[ 0.229518] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229523] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229528] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229622] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.229627] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.229630] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.229634] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.229694] 01:01: card 'Creative SB AWE64 PnP'
[ 0.229696] isapnp: 1 Plug & Play card detected total
[ 0.229823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.250380] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.271047] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.291547] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.312043] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.312450] Non-volatile memory driver v1.3
[ 0.312454] Linux agpgart interface v0.103
[ 0.312510] [drm] Initialized drm 1.1.0 20060810
[ 0.317848] loop: module loaded
[ 0.317981] ata_piix 0000:00:04.1: version 2.13
[ 0.318965] scsi host0: ata_piix
[ 0.319243] scsi host1: ata_piix
[ 0.319368] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 0.319373] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 0.319627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.319630] ehci-pci: EHCI PCI platform driver
[ 0.319656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.319676] ohci-pci: OHCI PCI platform driver
[ 0.319700] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.319869] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319873] penalty[15] = 0x10005c
[ 0.319874] penalty[14] = 0x10005c
[ 0.319876] penalty[12] = 0x20205c
[ 0.319877] penalty[11] = 0x5c
[ 0.319879] penalty[10] = 0x905c
[ 0.319881] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319883] penalty[9] = 0x800705c
[ 0.319884] penalty[7] = 0x11c05c
[ 0.319886] penalty[6] = 0x11105c
[ 0.319888] penalty[5] = 0x1d05c
[ 0.319889] penalty[4] = 0x11405c
[ 0.319891] penalty[3] = 0x1405c
[ 0.319893] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.319940] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319945] uhci_hcd 0000:00:04.2: PCI INT D: no GSI
[ 0.319971] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 0.319987] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 0.320096] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 0.320833] hub 1-0:1.0: USB hub found
[ 0.320852] hub 1-0:1.0: 2 ports detected
[ 0.321233] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.324648] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.324663] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.325008] mousedev: PS/2 mouse device common for all mice
[ 0.325436] rtc_cmos 00:02: RTC can wake from S4
[ 0.325629] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.325656] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 0.326049] NET: Registered protocol family 17
[ 0.326209] Using IPI No-Shortcut mode
[ 0.326514] registered taskstats version 1
[ 0.326921] rtc_cmos 00:02: setting system clock to 2016-09-28 18:42:34 UTC (1475088154)
[ 0.326997] PM: Hibernation image not present or could not be loaded.
[ 0.355482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.483499] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 0.483512] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 0.483622] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 0.483626] ata1.00: 234493056 sectors, multi 16: LBA48
[ 0.486508] ata2.00: configured for UDMA/33
[ 0.486816] ata1.00: configured for UDMA/33
[ 0.487064] ata2.01: configured for UDMA/33
[ 0.487361] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 0.488205] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 0.488358] sd 0:0:0:0: [sda] Write Protect is off
[ 0.488363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.488426] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.492298] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 0.506153] scsi 1:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 0.525076] sda: sda1 sda2 sda3
[ 0.525905] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.046926] random: fast init done
[ 1.120050] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13ad41f0395, max_idle_ns: 440795258035 ns
[ 1.935924] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.945228] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 1.965685] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.965719] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 1.967438] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 1.967664] Write protecting the kernel text: 3920k
[ 1.967730] Write protecting the kernel read-only data: 1528k
[ 4.322714] systemd-udevd[194]: starting version 215
[ 5.925473] random: crng init done
[ 7.622407] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 7.688916] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.149054] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 0.000000] Linux version 4.6.0-0.bpo.1-686 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x018bc000, 0x018bcfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1eb88000-0x1fb1efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c1775600, node_mem_map dfb7d024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 18 pages/cpu @dfb67000 s41676 r0 d32052 u73728
[ 0.000000] pcpu-alloc: s41676 r0 d32052 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129819
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-686 root=UUID=f9e42749-d46b-465f-911a-46fa2db271ad ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 493792K/523884K available (5424K kernel code, 664K rwdata, 1632K rodata, 688K init, 468K bss, 30092K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc178d000 - 0xc1839000 ( 688 kB)
.data : 0xc154c632 - 0xc178c000 (2302 kB)
.text : 0xc1000000 - 0xc154c632 (5425 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=de42c000 soft=de42e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1364.997 MHz processor
[ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 2729.99 BogoMIPS (lpj=5459988)
[ 0.004031] pid_max: default: 32768 minimum: 301
[ 0.004082] ACPI: Core revision 20160108
[ 0.009394] ACPI: 1 ACPI AML tables successfully acquired and loaded

[ 0.009411] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.009475] Security Framework initialized
[ 0.009482] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009505] AppArmor: AppArmor disabled by boot time parameter
[ 0.009534] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009540] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010311] Disabling memory control group subsystem
[ 0.010425] mce: CPU supports 5 MCE banks
[ 0.010464] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.010470] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.017077] Freeing SMP alternatives memory: 24K (c1839000 - c183f000)
[ 0.019801] ftrace: allocating 23042 entries in 46 pages
[ 0.032388] smpboot: Max logical packages: 1
[ 0.032406] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.032409] smpboot: SMP motherboard not detected
[ 0.032412] smpboot: SMP disabled
[ 0.032416] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.032447] Performance Events:
[ 0.032456] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.032460] no hardware sampling interrupt available.
[ 0.032465] p6 PMU driver.
[ 0.032472] ... version: 0
[ 0.032475] ... bit width: 32
[ 0.032478] ... generic registers: 2
[ 0.032481] ... value mask: 00000000ffffffff
[ 0.032485] ... max period: 000000007fffffff
[ 0.032488] ... fixed-purpose events: 0
[ 0.032491] ... event mask: 0000000000000003
[ 0.037491] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.037559] x86: Booted up 1 node, 1 CPUs
[ 0.037565] smpboot: Total of 1 processors activated (2729.99 BogoMIPS)
[ 0.037913] devtmpfs: initialized
[ 0.038555] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.038754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.038867] pinctrl core: initialized pinctrl subsystem
[ 0.039294] NET: Registered protocol family 16
[ 0.039683] cpuidle: using governor ladder
[ 0.039692] cpuidle: using governor menu
[ 0.039800] Simple Boot Flag at 0x46 set to 0x1
[ 0.039824] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.039935] ACPI: bus type PCI registered
[ 0.039943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.043822] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.043827] PCI: Using configuration type 1 for base access
[ 0.046101] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.046803] ACPI: Added _OSI(Module Device)
[ 0.046812] ACPI: Added _OSI(Processor Device)
[ 0.046816] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.046820] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048956] ACPI: Interpreter enabled
[ 0.049019] ACPI: (supports S0 S1 S4 S5)
[ 0.049024] ACPI: Using PIC for interrupt routing
[ 0.049072] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.056938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.057135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.057321] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.057506] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.057681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.057697] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.057711] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.057722] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.057847] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.057853] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.057859] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.057865] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.057870] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.057875] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.057879] PCI: root bus 00: using default resources
[ 0.058084] PCI host bridge to bus 0000:00
[ 0.058092] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.058098] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.058105] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.058125] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.058143] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.058328] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.058468] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.058658] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.058702] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.058725] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.058731] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.058736] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.058741] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.058864] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.058908] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.058988] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.059093] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.059100] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.059173] pci 0000:00:04.3: can't claim BAR 13 [io 0xe400-0xe43f]: address conflict with ACPI CPU throttle [io 0xe410-0xe415]
[ 0.059181] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.059189] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.059330] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.059346] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.059387] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.059512] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.059528] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.059540] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.059574] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.059697] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.059713] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.059950] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.059968] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.059979] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.060028] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.060055] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.060090] pci 0000:01:00.0: supports D1 D2
[ 0.060205] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.060213] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.060219] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.060226] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.060236] pci_bus 0000:00: on NUMA node 0
[ 0.063561] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.063570] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.063573] vgaarb: loaded
[ 0.063577] vgaarb: bridge control possible 0000:01:00.0
[ 0.063874] PCI: Using ACPI for IRQ routing
[ 0.063883] PCI: pci_cache_line_size set to 32 bytes
[ 0.063925] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.063931] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.064609] clocksource: Switched to clocksource pit
[ 0.089424] VFS: Disk quotas dquot_6.6.0
[ 0.089496] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.089898] pnp: PnP ACPI init
[ 0.090294] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.090304] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.090310] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.090317] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.090330] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.090945] system 00:01: [io 0xe400-0xe43f] could not be reserved
[ 0.090953] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.090959] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.090965] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.090971] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.090979] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091077] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.091649] pnp 00:03: [dma 2]
[ 0.091740] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.092667] pnp 00:04: [dma 3]
[ 0.092777] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.093465] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094271] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.094811] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.094832] pnp: PnP ACPI: found 8 devices
[ 0.094855] PnPBIOS: Disabled by ACPI PNP
[ 0.134355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.134407] clocksource: Switched to clocksource acpi_pm
[ 0.134450] pci 0000:00:04.3: BAR 13: [io size 0x0040] has bogus alignment
[ 0.134471] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.134479] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.134488] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.134495] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.134504] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.134510] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.134521] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.134527] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.134532] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.134537] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.134543] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.134647] NET: Registered protocol family 2
[ 0.135127] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.135176] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.135259] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.135335] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.135361] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.135642] NET: Registered protocol family 1
[ 0.135696] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.136474] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.136482] PCI: setting IRQ 9 as level-triggered
[ 0.136637] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.136643] PCI: CLS 32 bytes, default 32
[ 0.136834] Unpacking initramfs...
[ 1.039778] Freeing initrd memory: 15964K (deb88000 - dfb1f000)
[ 1.041185] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.041271] audit: initializing netlink subsys (disabled)
[ 1.041327] audit: type=2000 audit(1475088988.038:1): initialized
[ 1.041958] Initialise system trusted keyring
[ 1.042261] workingset: timestamp_bits=12 max_order=17 bucket_order=5
[ 1.042320] zbud: loaded
[ 1.453856] Key type asymmetric registered
[ 1.453869] Asymmetric key parser 'x509' registered
[ 1.453955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.454069] io scheduler noop registered
[ 1.454077] io scheduler deadline registered
[ 1.454099] io scheduler cfq registered (default)
[ 1.454352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.454372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.454418] intel_idle: does not run on family 6 model 11
[ 1.454473] GHES: HEST is not enabled!
[ 1.454531] isapnp: Scanning for PnP cards...
[ 1.577454] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577461] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577467] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577570] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 1.577576] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 1.577582] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 1.577587] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 1.577655] 01:01: card 'Creative SB AWE64 PnP'
[ 1.577660] isapnp: 1 Plug & Play card detected total
[ 1.577814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.598381] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.619069] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.639574] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.660079] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.660447] Linux agpgart interface v0.103
[ 1.660643] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 1.663978] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[ 1.664424] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.667651] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.667669] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.668121] mousedev: PS/2 mouse device common for all mice
[ 1.668261] rtc_cmos 00:02: RTC can wake from S4
[ 1.668454] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.668483] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 1.668565] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.669487] NET: Registered protocol family 10
[ 1.670100] mip6: Mobile IPv6
[ 1.670116] NET: Registered protocol family 17
[ 1.670130] mpls_gso: MPLS GSO support
[ 1.670586] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c
[ 1.670679] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.670708] Using IPI No-Shortcut mode
[ 1.671074] registered taskstats version 1
[ 1.671109] Loading compiled-in X.509 certificates
[ 1.676507] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 1.678863] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 1.678930] zswap: loaded using pool lzo/zbud
[ 1.679512] rtc_cmos 00:02: setting system clock to 2016-09-28 18:56:28 UTC (1475088988)
[ 1.679644] PM: Hibernation image not present or could not be loaded.
[ 1.682207] Freeing unused kernel memory: 688K (c178d000 - c1839000)
[ 1.682324] Write protecting the kernel text: 5428k
[ 1.682389] Write protecting the kernel read-only data: 1636k
[ 1.697898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.720514] systemd-udevd[68]: starting version 215
[ 1.721588] random: systemd-udevd urandom read with 6 bits of entropy available
[ 1.786059] floppy: module verification failed: signature and/or required key missing - tainting kernel
[ 1.807536] 3c59x: Donald Becker and others.
[ 1.807569] 0000:00:09.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001b000.
[ 1.835912] SCSI subsystem initialized
[ 1.839927] ACPI: bus type USB registered
[ 1.848968] usbcore: registered new interface driver usbfs
[ 1.849038] usbcore: registered new interface driver hub
[ 1.849106] usbcore: registered new device driver usb
[ 1.850782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.851947] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.868152] Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
[ 1.884954] libata version 3.00 loaded.
[ 1.888185] FDC 0 is a post-1991 82077
[ 1.915191] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 5.191651] tsc: Refined TSC clocksource calibration: 1364.999 MHz
[ 5.191666] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13acf81e477, max_idle_ns: 440795209386 ns
[ 5.237040] advansys 0000:00:0a.0: firmware: direct-loading firmware advansys/mcode.bin
[ 5.239578] scsi host0: AdvanSys SCSI 3.5: PCI Ultra: IO 0xA800-0xA80F, IRQ 0x9
[ 5.240493] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 5.240522] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 5.240537] uhci_hcd 0000:00:04.2: detected 2 ports
[ 5.240570] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 5.240841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.240847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.240852] usb usb1: Product: UHCI Host Controller
[ 5.240857] usb usb1: Manufacturer: Linux 4.6.0-0.bpo.1-686 uhci_hcd
[ 5.240862] usb usb1: SerialNumber: 0000:00:04.2
[ 5.241476] hub 1-0:1.0: USB hub found
[ 5.241605] hub 1-0:1.0: 2 ports detected
[ 5.241930] ata_piix 0000:00:04.1: version 2.13
[ 5.246895] scsi host1: ata_piix
[ 5.247422] scsi host2: ata_piix
[ 5.247592] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 5.247598] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 5.292062] blk_update_request: I/O error, dev fd0, sector 0
[ 5.292112] floppy: error -5 while reading block 0
[ 5.336074] blk_update_request: I/O error, dev fd1, sector 0
[ 5.336123] floppy: error -5 while reading block 0
[ 5.407512] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 5.407530] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 5.407642] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 5.407648] ata1.00: 234493056 sectors, multi 16: LBA48
[ 5.410333] ata1.00: configured for UDMA/33
[ 5.412383] ata2.00: configured for UDMA/33
[ 5.417014] ata2.01: configured for UDMA/33
[ 5.633723] psmouse serio1: hgpk: ID: 10 00 64
[ 6.188125] clocksource: Switched to clocksource tsc
[ 6.715330] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 6.718103] scsi 2:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 6.726655] scsi 2:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 6.742284] sd 1:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 6.742490] sd 1:0:0:0: [sda] Write Protect is off
[ 6.742497] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.742551] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.750462] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2
[ 6.763212] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 6.763226] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.763740] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.772980] sr 2:0:1:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 6.773472] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 6.775211] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.775317] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 6.775409] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 6.782512] sda: sda1 sda2 sda3
[ 6.783453] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.135083] PM: Starting manual resume from disk
[ 7.135103] PM: Hibernation image partition 8:2 present
[ 7.135107] PM: Looking for hibernation image.
[ 7.135659] PM: Image not found (code -22)
[ 7.135666] PM: Hibernation image not present or could not be loaded.
[ 7.532688] random: nonblocking pool is initialized
[ 7.553907] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 7.591627] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.355875] systemd-udevd[328]: starting version 215
[ 11.619994] media: Linux media interface: v0.10
[ 11.685887] parport_pc 00:04: reported by Plug and Play ACPI
[ 11.686032] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 11.690402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.701721] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 11.701738] ACPI: Power Button [PWRB]
[ 11.701904] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.701910] ACPI: Power Button [PWRF]
[ 11.780807] parport1: PC-style at 0x278 [PCSPP,TRISTATE]
[ 11.780838] parport1: irq 0 detected
[ 11.838897] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xe800, revision 0
[ 11.850093] tsc: Marking TSC unstable due to TSC halts in idle
[ 11.855564] clocksource: Switched to clocksource acpi_pm
[ 11.876508] Linux video capture interface: v2.00
[ 11.916287] blk_update_request: I/O error, dev fd0, sector 0
[ 11.916338] floppy: error -5 while reading block 0
[ 11.960429] blk_update_request: I/O error, dev fd1, sector 0
[ 11.960479] floppy: error -5 while reading block 0
[ 12.008383] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.104140] [drm] Initialized drm 1.1.0 20060810
[ 12.234841] bttv: driver version 0.9.19 loaded
[ 12.234855] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 12.234858] bttv: Host bridge needs ETBF enabled
[ 12.234939] bttv: Bt8xx card found (0)
[ 12.235679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 12.235686] PCI: setting IRQ 10 as level-triggered
[ 12.235709] bttv: 0: Bt848 (rev 18) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xd7000000
[ 12.239358] bttv: 0: using: Bt848 Capture 14MHz [card=163,insmod option]
[ 12.239391] bttv: 0: enabling ETBF (430FX/VP3 compatibility)
[ 12.239611] bttv: 0: tuner absent
[ 12.239671] bttv: 0: Setting PLL: 14318181 => 35468950 (needs up to 100ms)
[ 12.268124] bttv: PLL set ok
[ 12.268366] bttv: 0: registered device video0
[ 12.268460] bttv: 0: registered device vbi0
[ 12.546460] ppdev: user-space parallel port driver
[ 13.025157] [drm] radeon kernel modesetting enabled.
[ 13.026125] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 13.026132] PCI: setting IRQ 11 as level-triggered
[ 13.027255] [drm] initializing kernel modesetting (R200 0x1002:0x514D 0x148C:0x2054 0x00).
[ 13.027286] [drm] register mmio base: 0xD6800000
[ 13.027289] [drm] register mmio size: 65536
[ 13.028148] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 13.028167] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 13.028188] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 13.028196] radeon 0000:01:00.0: GTT: 64M 0xE4000000 - 0xE7FFFFFF
[ 13.028207] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used)
[ 13.028284] [drm] Detected VRAM RAM=128M, BAR=128M
[ 13.028288] [drm] RAM width 128bits DDR
[ 13.028450] [TTM] Zone kernel: Available graphics memory: 255234 kiB
[ 13.028455] [TTM] Initializing pool allocator
[ 13.028534] [drm] radeon: 64M of VRAM memory ready
[ 13.028539] [drm] radeon: 64M of GTT memory ready.
[ 13.029879] radeon 0000:01:00.0: WB disabled
[ 13.029898] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e4000000 and cpu addr 0xe081c000
[ 13.029905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.029908] [drm] Driver supports precise vblank timestamp query.
[ 13.029934] [drm] radeon: irq initialized.
[ 13.029977] [drm] Loading R200 Microcode
[ 13.176476] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[ 13.176803] [drm] radeon: ring at 0x00000000E4001000
[ 13.176832] [drm] ring test succeeded in 1 usecs
[ 13.177086] [drm] ib test succeeded in 0 usecs
[ 13.178410] [drm] Radeon Display Connectors
[ 13.178420] [drm] Connector 0:
[ 13.178423] [drm] VGA-1
[ 13.178428] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.178431] [drm] Encoders:
[ 13.178434] [drm] CRT1: INTERNAL_DAC1
[ 13.178438] [drm] Connector 1:
[ 13.178440] [drm] DVI-D-1
[ 13.178443] [drm] HPD1
[ 13.178448] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.178451] [drm] Encoders:
[ 13.178454] [drm] DFP1: INTERNAL_TMDS1
[ 13.215232] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 13.215929] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 13.248105] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.248149] Raw EDID:
[ 13.248185] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.248220] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.248254] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.248288] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.248322] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.248356] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.248390] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.248423] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.277207] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.277254] Raw EDID:
[ 13.277289] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.277325] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.277361] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.277398] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.277433] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.277470] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.277505] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.277541] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.307210] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.307264] Raw EDID:
[ 13.307301] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.307337] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.307373] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.307408] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.307445] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.307480] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.307516] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.307552] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.354770] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.354825] Raw EDID:
[ 13.354862] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.354899] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.354935] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.354970] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.355006] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.355042] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.355078] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.355114] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.355155] radeon 0000:01:00.0: DVI-D-1: EDID block 0 invalid.
[ 13.355573] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 13.542079] [drm] fb mappable at 0xD8040000
[ 13.542089] [drm] vram apper at 0xD8000000
[ 13.542092] [drm] size 3145728
[ 13.542096] [drm] fb depth is 24
[ 13.542099] [drm] pitch is 4096
[ 13.542743] fbcon: radeondrmfb (fb0) is primary device
[ 13.666095] Console: switching to colour frame buffer device 128x48
[ 13.683804] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.683825] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 13.923232] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k FS
[ 14.215756] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 15.695493] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 16.495658] device-mapper: uevent: version 1.0.3
[ 16.497041] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[ 16.799373] lp0: using parport0 (interrupt-driven).
[ 16.800840] lp1: using parport1 (polling).
[ 16.889228] loop: module loaded
[ 17.022545] w83781d: Found a W83781D chip at 0x290
[ 17.597067] sbawe 01:01.00: [irq 5]
[ 17.597083] sbawe 01:01.00: [dma 1]
[ 17.597089] sbawe 01:01.00: [dma 5]
[ 17.597103] sbawe 01:01.00: [io 0x0220-0x022f]
[ 17.597111] sbawe 01:01.00: [io 0x0330-0x0331]
[ 17.597120] sbawe 01:01.00: [io 0x0388-0x038b]
[ 17.599438] sbawe 01:01.00: activated
[ 17.599448] sbawe 01:01.02: [io 0x0620-0x0623]
[ 17.599456] sbawe 01:01.02: [io 0x0a20-0x0a23]
[ 17.599464] sbawe 01:01.02: [io 0x0e20-0x0e23]
[ 17.601710] sbawe 01:01.02: activated
[ 17.652094] EMU8000 [0x620]: 512 KiB on-board DRAM detected
[ 19.180711] fuse init (API version 7.24)
[ 21.756729] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.858427] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 22.867383] eth0: setting half-duplex.
[ 23.717991] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 23.718526] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 23.847833] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 33.505269] /dev/vmmon[1902]: Module vmmon: registered with major=10 minor=165
[ 33.505297] /dev/vmmon[1902]: Module vmmon: initialized
[ 33.774009] /dev/vmci[1912]: VMCI: Driver initialized.
[ 33.775258] /dev/vmci[1912]: Module vmci: registered with major=10 minor=58
[ 33.775270] /dev/vmci[1912]: Module vmci: initialized
[ 34.861891] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 34.862513] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 34.986158] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 35.021149] /dev/vmnet: open called by PID 1968 (vmnet-bridge)
[ 35.021173] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 35.021229] /dev/vmnet: port on hub 0 successfully opened
[ 35.021261] bridge-eth0: up
[ 35.021269] bridge-eth0: attached
[ 35.190680] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 35.191284] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 35.346853] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 36.489789] /dev/vmnet: open called by PID 2015 (vmnet-dhcpd)
[ 36.489815] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 36.489865] /dev/vmnet: port on hub 1 successfully opened
[ 36.693868] /dev/vmnet: open called by PID 2017 (vmnet-netifup)
[ 36.693903] /dev/vmnet: port on hub 1 successfully opened
[ 36.940293] /dev/vmnet: open called by PID 2019 (vmnet-dhcpd)
[ 36.940323] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 36.940381] /dev/vmnet: port on hub 8 successfully opened
[ 37.188528] /dev/vmnet: open called by PID 2028 (vmnet-natd)
[ 37.188565] /dev/vmnet: port on hub 8 successfully opened
[ 37.353293] /dev/vmnet: open called by PID 2030 (vmnet-netifup)
[ 37.353333] /dev/vmnet: port on hub 8 successfully opened
[ 41.486843] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.487454] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 41.606640] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 41.728136] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.728793] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 41.848582] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 41.968521] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.969129] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 42.101880] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 50.247288] systemd-logind[2180]: New seat seat0.
[ 50.272662] systemd-logind[2180]: Watching system buttons on /dev/input/event3 (Power Button)
[ 50.272890] systemd-logind[2180]: Watching system buttons on /dev/input/event2 (Power Button)
[ 50.291427] systemd-logind[2180]: Failed to start user service: Unknown unit: user@xxxxxxxxxxxx
[ 50.307693] systemd-logind[2180]: New session c1 of user rainbow.
[ 55.626314] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 55.626845] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 55.747297] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 55.867910] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 55.868916] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 55.987477] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 56.107247] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 56.107855] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 56.226627] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 97.010370] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 97.077658] JFS: nTxBlock = 3988, nTxLock = 31904
[ 97.191115] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 97.384418] QNX4 filesystem 0.2.3 registered.
[ 97.556056] raid6: mmxx1 gen() 1302 MB/s
[ 97.624061] raid6: mmxx2 gen() 1561 MB/s
[ 97.692074] raid6: sse1x1 gen() 1152 MB/s
[ 97.760064] raid6: sse1x2 gen() 1522 MB/s
[ 97.828165] raid6: int32x1 gen() 420 MB/s
[ 97.896057] raid6: int32x1 xor() 208 MB/s
[ 97.964139] raid6: int32x2 gen() 539 MB/s
[ 98.032076] raid6: int32x2 xor() 297 MB/s
[ 98.100153] raid6: int32x4 gen() 466 MB/s
[ 98.168082] raid6: int32x4 xor() 291 MB/s
[ 98.236134] raid6: int32x8 gen() 428 MB/s
[ 98.304042] raid6: int32x8 xor() 263 MB/s
[ 98.304046] raid6: using algorithm mmxx2 gen() 1561 MB/s
[ 98.304050] raid6: using intx1 recovery algorithm
[ 99.244489] xor: measuring software checksum speed
[ 99.284036] pIII_sse : 3069.000 MB/sec
[ 99.324034] prefetch64-sse: 3294.000 MB/sec
[ 99.324039] xor: using function: prefetch64-sse (3294.000 MB/sec)
[ 99.576155] Btrfs loaded
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #111 SMP Wed Sep 28 18:50:17 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c15b1c00, node_mem_map dfbfd020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @dfbe6000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129947
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda3 ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 512336K/523884K available (3918K kernel code, 437K rwdata, 1520K rodata, 524K init, 412K bss, 11548K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc15c1000 - 0xc1644000 ( 524 kB)
.data : 0xc13d3be1 - 0xc15bf6a0 (1966 kB)
.text : 0xc1000000 - 0xc13d3be1 (3918 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1365.047 MHz processor
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2730.09 BogoMIPS (lpj=5460188)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004036] ACPI: Core revision 20160422
[ 0.008470] ACPI: 1 ACPI AML tables successfully acquired and loaded

[ 0.008483] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.008532] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008536] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009150] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.009157] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.012097] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.012358] smpboot: Max logical packages: 1
[ 0.012364] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.012365] smpboot: SMP motherboard not detected
[ 0.012367] smpboot: SMP disabled
[ 0.012370] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.012374] Performance Events:
[ 0.012379] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012381] no hardware sampling interrupt available.
[ 0.012385] p6 PMU driver.
[ 0.012390] ... version: 0
[ 0.012391] ... bit width: 32
[ 0.012393] ... generic registers: 2
[ 0.012395] ... value mask: 00000000ffffffff
[ 0.012397] ... max period: 000000007fffffff
[ 0.012398] ... fixed-purpose events: 0
[ 0.012400] ... event mask: 0000000000000003
[ 0.013162] x86: Booted up 1 node, 1 CPUs
[ 0.013169] smpboot: Total of 1 processors activated (2730.09 BogoMIPS)
[ 0.013490] devtmpfs: initialized
[ 0.014174] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.014306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014524] NET: Registered protocol family 16
[ 0.014901] cpuidle: using governor ladder
[ 0.014905] cpuidle: using governor menu
[ 0.015039] Simple Boot Flag at 0x46 set to 0x1
[ 0.015052] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.015065] ACPI: bus type PCI registered
[ 0.018903] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.018906] PCI: Using configuration type 1 for base access
[ 0.022164] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.022504] ACPI: Added _OSI(Module Device)
[ 0.022507] ACPI: Added _OSI(Processor Device)
[ 0.022509] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.022512] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.024396] ACPI: Interpreter enabled
[ 0.024450] ACPI: (supports S0 S1 S4 S5)
[ 0.024453] ACPI: Using PIC for interrupt routing
[ 0.024496] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.031263] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.031434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.031593] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.031752] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.031905] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.031916] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.031928] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.031937] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.032085] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.032089] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.032093] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.032097] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.032101] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.032104] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.032107] PCI: root bus 00: using default resources
[ 0.032213] PCI host bridge to bus 0000:00
[ 0.032219] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.032223] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.032228] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.032248] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.032261] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.032423] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.032551] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.032725] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.032766] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.032786] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.032790] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.032793] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.032797] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.032911] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.032953] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.033026] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.033116] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.033121] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.033188] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.033193] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.033199] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.033334] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.033348] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.033386] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033492] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.033506] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.033516] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.033547] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033665] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.033680] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.033892] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.033907] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.033916] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.033925] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.033948] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.033979] pci 0000:01:00.0: supports D1 D2
[ 0.034076] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.034082] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.034087] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.034092] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.034101] pci_bus 0000:00: on NUMA node 0
[ 0.037062] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.037067] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.037068] vgaarb: loaded
[ 0.037071] vgaarb: bridge control possible 0000:01:00.0
[ 0.037240] SCSI subsystem initialized
[ 0.037353] libata version 3.00 loaded.
[ 0.037365] ACPI: bus type USB registered
[ 0.037424] usbcore: registered new interface driver usbfs
[ 0.037452] usbcore: registered new interface driver hub
[ 0.037490] usbcore: registered new device driver usb
[ 0.037555] PCI: Using ACPI for IRQ routing
[ 0.037561] PCI: pci_cache_line_size set to 32 bytes
[ 0.037597] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.037601] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.038338] clocksource: Switched to clocksource pit
[ 0.052096] pnp: PnP ACPI init
[ 0.052457] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.052465] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.052470] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.052475] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.052487] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.053049] system 00:01: [io 0xe400-0xe43f] has been reserved
[ 0.053054] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.053059] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.053064] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.053068] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.053076] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.053159] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.053585] pnp 00:03: [dma 2]
[ 0.053739] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.054584] pnp 00:04: [dma 3]
[ 0.054694] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.055294] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.055996] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.056466] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.056484] pnp: PnP ACPI: found 8 devices
[ 0.056491] PnPBIOS: Disabled
[ 0.095289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.095331] clocksource: Switched to clocksource acpi_pm
[ 0.095374] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.095382] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.095390] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.095394] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.095401] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.095406] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095415] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.095419] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.095423] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.095427] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.095431] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095510] NET: Registered protocol family 2
[ 0.095893] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.095940] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.096024] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.096103] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096128] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096280] NET: Registered protocol family 1
[ 0.096317] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096955] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.096959] PCI: setting IRQ 9 as level-triggered
[ 0.097097] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.097101] PCI: CLS 32 bytes, default 32
[ 0.098279] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.099086] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.106007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.106015] io scheduler noop registered
[ 0.106017] io scheduler deadline registered
[ 0.106097] io scheduler cfq registered (default)
[ 0.106636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.106645] ACPI: Power Button [PWRB]
[ 0.106790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.106795] ACPI: Power Button [PWRF]
[ 0.106891] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.106980] Warning: Processor Platform Limit event detected, but not handled.
[ 0.106981] Consider compiling CPUfreq support into your kernel.
[ 0.107420] isapnp: Scanning for PnP cards...
[ 0.230225] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230230] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230235] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230330] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.230334] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.230338] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.230342] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.230402] 01:01: card 'Creative SB AWE64 PnP'
[ 0.230405] isapnp: 1 Plug & Play card detected total
[ 0.230532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.251089] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.271750] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.292251] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.312746] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.313153] Non-volatile memory driver v1.3
[ 0.313157] Linux agpgart interface v0.103
[ 0.313212] [drm] Initialized drm 1.1.0 20060810
[ 0.318553] loop: module loaded
[ 0.318686] ata_piix 0000:00:04.1: version 2.13
[ 0.319675] scsi host0: ata_piix
[ 0.319952] scsi host1: ata_piix
[ 0.320151] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 0.320156] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 0.320411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.320414] ehci-pci: EHCI PCI platform driver
[ 0.320440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.320459] ohci-pci: OHCI PCI platform driver
[ 0.320484] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.320676] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 0.320691] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 0.320735] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 0.321473] hub 1-0:1.0: USB hub found
[ 0.321492] hub 1-0:1.0: 2 ports detected
[ 0.321869] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.325079] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.325093] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.325439] mousedev: PS/2 mouse device common for all mice
[ 0.325868] rtc_cmos 00:02: RTC can wake from S4
[ 0.326060] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.326087] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 0.326482] NET: Registered protocol family 17
[ 0.326643] Using IPI No-Shortcut mode
[ 0.326945] registered taskstats version 1
[ 0.327358] rtc_cmos 00:02: setting system clock to 2016-09-28 18:53:17 UTC (1475088797)
[ 0.327435] PM: Hibernation image not present or could not be loaded.
[ 0.354302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.482749] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 0.482754] ata1.00: 234493056 sectors, multi 16: LBA48
[ 0.485386] ata1.00: configured for UDMA/33
[ 0.485703] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 0.486359] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 0.486507] sd 0:0:0:0: [sda] Write Protect is off
[ 0.486512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.486574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.487138] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 0.487150] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 0.491925] ata2.00: configured for UDMA/33
[ 0.496564] ata2.01: configured for UDMA/33
[ 0.501093] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 0.514124] scsi 1:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 0.521421] sda: sda1 sda2 sda3
[ 0.522279] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.960162] random: fast init done
[ 1.120051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13ad257ca30, max_idle_ns: 440795244238 ns
[ 1.935964] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.949908] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 1.970348] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.970382] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 1.972222] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 1.972493] Write protecting the kernel text: 3920k
[ 1.972562] Write protecting the kernel read-only data: 1528k
[ 4.327352] systemd-udevd[194]: starting version 215
[ 5.904101] random: crng init done
[ 7.617164] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 7.685443] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.153707] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro

Next message: Randy Dunlap: "Re: linux-next: Tree for Sep 28 (drivers/gpu/drm/amd/amdgpu/amdgpu.ko)"
Previous message: Moritz Fischer: "[PATCH 3/3] mfd: cros_ec_spi: Add compatible string for NI version of cros-ec-spi"
In reply to: Sinan Kaya: "Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off"
Next in thread: Sinan Kaya: "Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]