[PATCH v5 0/3] MT8173 HDMI 4K support

From: Bibby Hsieh
Date: Wed Sep 28 2016 - 23:02:34 EST

This is MT8173 HDMI 4K support PATCH v5, based on 4.8-rc1.

In order to support HDMI 4K on MT8173,
we have to make some modifications.
1) Make sure that mtk_hdmi_send_infoframe is sent successfully.
2) Enhance the HDMI driving current to improve performance.
3) Make sure that pixel clock is 297MHz when resolution is 4K.

Changes since v4:
- Update commit message and patch title.

Changes since v3:
- Rebase to 4.8-rc1.
- The valid range of tvdpll is 1G to 2G Hz, so, we Change the
if statement of mode->clock to fit that and add a comment.

Changes since v2:
- Remove the change about preparation for MT2701 support.

Changes since v1:
- According to the suggestion from philipp, We use the new
dpi0_sel rate set method.
- calls clk_set_rate to set the dpi0_sel according to the
pixel clock.
- Remove the direct access to all the intermediate clock part.
- Remove the intermediate tvdpll_d* clocks in dts.
- According to suggestion from CK, we rename the clock parse
function and remove it from mtk_dpi_conf struct.
- Merges the hdmi Pll set rate for pixel clock greater than
165MHz and smaller parts.

The PATCH depends on the following patch:
(arm64: dts: mt8173: add mmsel clocks for 4K support)

Junzhi Zhao (3):
drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
drm/mediatek: enhance the HDMI driving current
drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G

drivers/gpu/drm/mediatek/mtk_dpi.c | 9 +++--
drivers/gpu/drm/mediatek/mtk_hdmi.c | 17 ++++++----
drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 42 +++++++++++++++++-------
3 files changed, 48 insertions(+), 20 deletions(-)