[PATCH 0/2] powernv:stop: Use psscr_val,mask provided by firmware

From: Gautham R. Shenoy
Date: Thu Sep 29 2016 - 03:06:21 EST


From: "Gautham R. Shenoy" <ego@xxxxxxxxxxxxxxxxxx>

Hi,

In the current implementation, the code for ISA v3.0 stop
implementation has a couple of shortcomings.

a) The code hand-codes the values for ESL,EC,TR,MTL bits of PSSCR and
uses only the RL field from the firmware. While this is not
incorrect, since the hand-coded values are legitimate, it is not a
very flexible design since the firmware has the capability to
communicate these values via the "ibm,cpu-idle-state-psscr" and
"ibm,cpu-idle-state-psscr-mask" properties. In case where the
firmware provides values for these fields that is different from
the hand-coded values, the current code will not work as intended.

b) Due to issue a), the current code assumes that ESL=EC=1 for all the
stop states and hence the wakeup from the stop instruction will
happen at 0x100, the system-reset vector. However, the ISA v3.0
allows the ESL=EC=0 behaviour where the corresponding stop-state
loses no state and wakes up from the subsequent instruction. The
current code doesn't handle this case.

This patch series addresses these issues.

The first patch in the series renames the existing
IDLE_STATE_ENTER_SEQ macro to IDLE_STATE_ENTER_SEQ_NORET. It reuses
the name IDLE_STATE_ENTER_SEQ for entering into stop-states which wake
up at the subsequent instruction.

The second patch in the series fixes issues a) and b) by ensuring that
the psscr-value and the psscr-mask provided by the firmware are what
will be used to set a particular stop state. It also adds support for
handling wake-up from stop states which were entered with ESL=EC=0.

These patches depend on the following skiboot patch that exports
the PSSCR values and the mask for all the stop states:
https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html

Gautham R. Shenoy (2):
powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro
powernv: Pass PSSCR value and mask to power9_idle_stop

arch/powerpc/include/asm/cpuidle.h | 5 ++-
arch/powerpc/include/asm/processor.h | 3 +-
arch/powerpc/kernel/exceptions-64s.S | 6 +--
arch/powerpc/kernel/idle_book3s.S | 41 ++++++++++-------
arch/powerpc/platforms/powernv/idle.c | 76 +++++++++++++++++++++++++++-----
arch/powerpc/platforms/powernv/powernv.h | 3 +-
arch/powerpc/platforms/powernv/smp.c | 7 +--
drivers/cpuidle/cpuidle-powernv.c | 30 ++++++++++---
8 files changed, 127 insertions(+), 44 deletions(-)

--
1.9.4